LM2902YPT vs LM2903VQPWRG4 Сравнение
Подробное сравнение бок о бок LM2902YPT от STMicroelectronics и LM2903VQPWRG4 от Texas Instruments. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
STMicroelectronics
LM2902YPT - Low-Power Quad Op Amp, 1.3 MHz | STMicroelectronics
LM2902YPT ✓ АктивенСравнение характеристик
| Параметр | LM2902YPT | LM2903VQPWRG4 |
|---|---|---|
| Бренд | STMicroelectronics | Texas Instruments |
| Категория | Amplifier ICs | Amplifier ICs |
| Статус жизненного цикла | Активен | Активен |
| Number of Amplifiers | 4 circuits | — |
| Amplifier Type | Low-power general-purpose operational amplifier | — |
| Internal Frequency Compensation | Yes | — |
| Input Bias Current | 20 nA | [DATA_NEEDED: input bias current] |
| Gain-Bandwidth Product | 1.3 MHz | — |
| Slew Rate | 0.4 V/µs | — |
| Typical Input Offset Voltage | 7 mV | — |
| Тип выхода | Push-pull | Open collector |
| Supply Voltage Range | 3 V to 36 V | — |
| Диапазон рабочих температур | -40 °C to +125 °C | [DATA_NEEDED: operating temperature range] |
| Package Type | 14-pin TSSOP | — |
| Тип монтажа | Surface mount | Surface mount |
| Количество выводов | 14 pins | — |
| Automotive and Industrial Design | Yes | — |
| Статус RoHS | Compliant | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | Rail-to-rail |
| Output Current | [DATA_NEEDED: output current rating] | — |
| Ток потребления | [DATA_NEEDED: supply current per amplifier] | — |
| Input Offset Current | [DATA_NEEDED: input offset current] | — |
| Comparator Type | — | Dual differential comparator |
| Number of Channels | — | 2 channels |
| Supply Voltage Rating | — | 18 V |
| Response Time | — | 0.3 us |
| Supply Configuration | — | Single supply or dual supplies |
| Supply Current Drain | — | 0.4 mA typical per comparator |
| Корпус | — | 8-TSSOP (PW) |
| Package Width | — | 4.40 mm |
| Product Classification | — | Standard general-purpose comparator |
| Channel Independence | — | 2 independent channels |
| Output Pull-Up Requirement | — | [DATA_NEEDED: external pull-up resistor value] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance] |