MC3486NSR vs ADM4851ARZ Vergleich
Detaillierter Direktvergleich von MC3486NSR von Texas Instruments und ADM4851ARZ von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
MC3486NSR - Quad Differential RS-422/423 Receiver | Texas Instruments (Tape & Reel)
MC3486NSR ✓ AktivAnalog Devices
ADM4851ARZ - 500 kbps Half-Duplex RS-485 Transceiver | Analog Devices
ADM4851ARZ ✓ AktivSpezifikationsvergleich
| Parameter | MC3486NSR | ADM4851ARZ |
|---|---|---|
| Marke | Texas Instruments | Analog Devices |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Receiver Type | Quadruple differential line receiver | — |
| Number of Receiver Channels | 4 channels | — |
| Independent Differential Inputs | 4 independent differential-input pairs | — |
| Versorgungsspannung | 5 V single supply | 5 V |
| Ausgangstyp | TTL-compatible, 3-state | — |
| Input Standard Compatibility | TIA/EIA-422-B and TIA/EIA-423-B | — |
| ITU Recommendation Compatibility | ITU V.10 and V.11 | — |
| Betriebstemperaturbereich | 0 C to 70 C | [DATA_NEEDED: operating temperature range] |
| Gehäuse | 16-pin SOIC | 8-pin SOIC |
| Montageart | Surface mount | Surface mount |
| Device Type | Line receiver | — |
| Logic Compatibility | TTL-compatible | — |
| High-Impedance Output State | Available through 3-state output circuitry | — |
| Recommended Companion Driver | MC3487 family | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Input Differential Voltage Range | [DATA_NEEDED: input differential voltage range] | — |
| Maximum Input Voltage | [DATA_NEEDED: maximum input voltage] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Product Type | — | RS-485/RS-422 differential line transceiver |
| Maximum Data Rate | — | 500 kbps |
| Duplex Mode | — | Half-duplex |
| Supported Standards | — | EIA RS-485 and EIA RS-422 |
| Driver Configuration | — | 1/1 transceiver |
| Slew Rate | — | Limited |
| Signal Type | — | Balanced differential |
| Versorgungsstrom | — | [DATA_NEEDED: supply current] |
| Receiver Common-Mode Voltage Range | — | [DATA_NEEDED: receiver common-mode voltage range] |
| Differential Input Sensitivity | — | [DATA_NEEDED: differential input sensitivity] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Abschaltstrom | — | [DATA_NEEDED: shutdown current] |
| Lead Pitch | — | [DATA_NEEDED: lead pitch] |
| AEC-Q100 Qualification | — | not_applicable |