MC3486NSR vs ADM4851ARZ موازنہ
تفصیلی ساتھ ساتھ موازنہ از MC3486NSR بذریعہ Texas Instruments اور ADM4851ARZ بذریعہ Analog Devices. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔
Texas Instruments
MC3486NSR - Quad Differential RS-422/423 Receiver | Texas Instruments (Tape & Reel)
MC3486NSR ✓ فعالAnalog Devices
ADM4851ARZ - 500 kbps Half-Duplex RS-485 Transceiver | Analog Devices
ADM4851ARZ ✓ فعالخصوصیات کا موازنہ
| پیرامیٹر | MC3486NSR | ADM4851ARZ |
|---|---|---|
| برانڈ | Texas Instruments | Analog Devices |
| زمرہ | Interface ICs | Interface ICs |
| لائف سائیکل کی حالت | فعال | فعال |
| Receiver Type | Quadruple differential line receiver | — |
| Number of Receiver Channels | 4 channels | — |
| Independent Differential Inputs | 4 independent differential-input pairs | — |
| سپلائی وولٹیج | 5 V single supply | 5 V |
| آؤٹ پٹ کی قسم | TTL-compatible, 3-state | — |
| Input Standard Compatibility | TIA/EIA-422-B and TIA/EIA-423-B | — |
| ITU Recommendation Compatibility | ITU V.10 and V.11 | — |
| آپریٹنگ درجہ حرارت رینج | 0 C to 70 C | [DATA_NEEDED: operating temperature range] |
| پیکیج | 16-pin SOIC | 8-pin SOIC |
| ماؤنٹنگ ٹائپ | Surface mount | Surface mount |
| Device Type | Line receiver | — |
| Logic Compatibility | TTL-compatible | — |
| High-Impedance Output State | Available through 3-state output circuitry | — |
| Recommended Companion Driver | MC3487 family | — |
| RoHS اسٹیٹس | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Input Differential Voltage Range | [DATA_NEEDED: input differential voltage range] | — |
| Maximum Input Voltage | [DATA_NEEDED: maximum input voltage] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Product Type | — | RS-485/RS-422 differential line transceiver |
| Maximum Data Rate | — | 500 kbps |
| Duplex Mode | — | Half-duplex |
| Supported Standards | — | EIA RS-485 and EIA RS-422 |
| Driver Configuration | — | 1/1 transceiver |
| Slew Rate | — | Limited |
| Signal Type | — | Balanced differential |
| سپلائی کرنٹ | — | [DATA_NEEDED: supply current] |
| Receiver Common-Mode Voltage Range | — | [DATA_NEEDED: receiver common-mode voltage range] |
| Differential Input Sensitivity | — | [DATA_NEEDED: differential input sensitivity] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| شٹ ڈاؤن کرنٹ | — | [DATA_NEEDED: shutdown current] |
| Lead Pitch | — | [DATA_NEEDED: lead pitch] |
| AEC-Q100 Qualification | — | not_applicable |