MC3486NSR vs ADM4851ARZ مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ MC3486NSR بواسطة Texas Instruments و ADM4851ARZ بواسطة Analog Devices. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Texas Instruments
MC3486NSR - Quad Differential RS-422/423 Receiver | Texas Instruments (Tape & Reel)
MC3486NSR ✓ نشطAnalog Devices
ADM4851ARZ - 500 kbps Half-Duplex RS-485 Transceiver | Analog Devices
ADM4851ARZ ✓ نشطمقارنة المواصفات
| المعامل | MC3486NSR | ADM4851ARZ |
|---|---|---|
| العلامة التجارية | Texas Instruments | Analog Devices |
| الفئة | Interface ICs | Interface ICs |
| حالة دورة الحياة | نشط | نشط |
| Receiver Type | Quadruple differential line receiver | — |
| Number of Receiver Channels | 4 channels | — |
| Independent Differential Inputs | 4 independent differential-input pairs | — |
| جهد التغذية | 5 V single supply | 5 V |
| نوع الخرج | TTL-compatible, 3-state | — |
| Input Standard Compatibility | TIA/EIA-422-B and TIA/EIA-423-B | — |
| ITU Recommendation Compatibility | ITU V.10 and V.11 | — |
| نطاق درجة حرارة التشغيل | 0 C to 70 C | [DATA_NEEDED: operating temperature range] |
| العلبة | 16-pin SOIC | 8-pin SOIC |
| نوع التركيب | Surface mount | Surface mount |
| Device Type | Line receiver | — |
| Logic Compatibility | TTL-compatible | — |
| High-Impedance Output State | Available through 3-state output circuitry | — |
| Recommended Companion Driver | MC3487 family | — |
| حالة RoHS | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Input Differential Voltage Range | [DATA_NEEDED: input differential voltage range] | — |
| Maximum Input Voltage | [DATA_NEEDED: maximum input voltage] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Product Type | — | RS-485/RS-422 differential line transceiver |
| Maximum Data Rate | — | 500 kbps |
| Duplex Mode | — | Half-duplex |
| Supported Standards | — | EIA RS-485 and EIA RS-422 |
| Driver Configuration | — | 1/1 transceiver |
| Slew Rate | — | Limited |
| Signal Type | — | Balanced differential |
| تيار التغذية | — | [DATA_NEEDED: supply current] |
| Receiver Common-Mode Voltage Range | — | [DATA_NEEDED: receiver common-mode voltage range] |
| Differential Input Sensitivity | — | [DATA_NEEDED: differential input sensitivity] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| تيار الإيقاف | — | [DATA_NEEDED: shutdown current] |
| Lead Pitch | — | [DATA_NEEDED: lead pitch] |
| AEC-Q100 Qualification | — | not_applicable |