MC3486NSR vs ADM4851ARZ Karşılaştırma
Ayrıntılı yan yana karşılaştırma MC3486NSR tarafından Texas Instruments ve ADM4851ARZ tarafından Analog DevicesAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Texas Instruments
MC3486NSR - Quad Differential RS-422/423 Receiver | Texas Instruments (Tape & Reel)
MC3486NSR ✓ AktifAnalog Devices
ADM4851ARZ - 500 kbps Half-Duplex RS-485 Transceiver | Analog Devices
ADM4851ARZ ✓ AktifÖzellik Karşılaştırması
| Parametre | MC3486NSR | ADM4851ARZ |
|---|---|---|
| Marka | Texas Instruments | Analog Devices |
| Kategori | Interface ICs | Interface ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Receiver Type | Quadruple differential line receiver | — |
| Number of Receiver Channels | 4 channels | — |
| Independent Differential Inputs | 4 independent differential-input pairs | — |
| Besleme Gerilimi | 5 V single supply | 5 V |
| Çıkış Türü | TTL-compatible, 3-state | — |
| Input Standard Compatibility | TIA/EIA-422-B and TIA/EIA-423-B | — |
| ITU Recommendation Compatibility | ITU V.10 and V.11 | — |
| İşletim Sıcaklığı Aralığı | 0 C to 70 C | [DATA_NEEDED: operating temperature range] |
| Paket | 16-pin SOIC | 8-pin SOIC |
| Montaj Türü | Surface mount | Surface mount |
| Device Type | Line receiver | — |
| Logic Compatibility | TTL-compatible | — |
| High-Impedance Output State | Available through 3-state output circuitry | — |
| Recommended Companion Driver | MC3487 family | — |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Input Differential Voltage Range | [DATA_NEEDED: input differential voltage range] | — |
| Maximum Input Voltage | [DATA_NEEDED: maximum input voltage] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Product Type | — | RS-485/RS-422 differential line transceiver |
| Maximum Data Rate | — | 500 kbps |
| Duplex Mode | — | Half-duplex |
| Supported Standards | — | EIA RS-485 and EIA RS-422 |
| Driver Configuration | — | 1/1 transceiver |
| Slew Rate | — | Limited |
| Signal Type | — | Balanced differential |
| Besleme Akımı | — | [DATA_NEEDED: supply current] |
| Receiver Common-Mode Voltage Range | — | [DATA_NEEDED: receiver common-mode voltage range] |
| Differential Input Sensitivity | — | [DATA_NEEDED: differential input sensitivity] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Kapatma Akımı | — | [DATA_NEEDED: shutdown current] |
| Lead Pitch | — | [DATA_NEEDED: lead pitch] |
| AEC-Q100 Qualification | — | not_applicable |