MC3486NSR vs ADM4851ARZ Comparaison
Comparaison détaillée côte à côte de MC3486NSR par Texas Instruments et ADM4851ARZ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
MC3486NSR - Quad Differential RS-422/423 Receiver | Texas Instruments (Tape & Reel)
MC3486NSR ✓ ActifAnalog Devices
ADM4851ARZ - 500 kbps Half-Duplex RS-485 Transceiver | Analog Devices
ADM4851ARZ ✓ ActifComparaison des spécifications
| Paramètre | MC3486NSR | ADM4851ARZ |
|---|---|---|
| Marque | Texas Instruments | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Receiver Type | Quadruple differential line receiver | — |
| Number of Receiver Channels | 4 channels | — |
| Independent Differential Inputs | 4 independent differential-input pairs | — |
| Tension d'alimentation | 5 V single supply | 5 V |
| Type de sortie | TTL-compatible, 3-state | — |
| Input Standard Compatibility | TIA/EIA-422-B and TIA/EIA-423-B | — |
| ITU Recommendation Compatibility | ITU V.10 and V.11 | — |
| Plage de température de fonctionnement | 0 C to 70 C | [DATA_NEEDED: operating temperature range] |
| Boîtier | 16-pin SOIC | 8-pin SOIC |
| Type de montage | Surface mount | Surface mount |
| Device Type | Line receiver | — |
| Logic Compatibility | TTL-compatible | — |
| High-Impedance Output State | Available through 3-state output circuitry | — |
| Recommended Companion Driver | MC3487 family | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Input Differential Voltage Range | [DATA_NEEDED: input differential voltage range] | — |
| Maximum Input Voltage | [DATA_NEEDED: maximum input voltage] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Product Type | — | RS-485/RS-422 differential line transceiver |
| Maximum Data Rate | — | 500 kbps |
| Duplex Mode | — | Half-duplex |
| Supported Standards | — | EIA RS-485 and EIA RS-422 |
| Driver Configuration | — | 1/1 transceiver |
| Slew Rate | — | Limited |
| Signal Type | — | Balanced differential |
| Courant d'alimentation | — | [DATA_NEEDED: supply current] |
| Receiver Common-Mode Voltage Range | — | [DATA_NEEDED: receiver common-mode voltage range] |
| Differential Input Sensitivity | — | [DATA_NEEDED: differential input sensitivity] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Courant d'arrêt | — | [DATA_NEEDED: shutdown current] |
| Lead Pitch | — | [DATA_NEEDED: lead pitch] |
| AEC-Q100 Qualification | — | not_applicable |