MPX2010DP vs MPX2010GS Vergleich
Detaillierter Direktvergleich von MPX2010DP von NXP Semiconductors und MPX2010GS von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | MPX2010DP | MPX2010GS |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Pressure Sensors | Pressure Sensors |
| Lebenszyklusstatus | Aktiv | Obsolete |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $8,50 | $15,95 |
| Sensortyp | Differential Pressure Sensor | — |
| Pressure Range | 0 to 10 kPa (0 to 1.45 PSI) | — |
| Technology | Piezoresistive (silicon strain gauge bridge) | Piezoresistive (silicon diaphragm) |
| Ausgangstyp | Analog voltage, Wheatstone bridge (mV level) | Wheatstone Bridge (analog voltage) |
| Typical Full-Scale Span | 25 mV at 10 V excitation | — |
| Zero Pressure Offset | 0 mV nominally (±1.0 mV max) | — |
| Versorgungsspannung | 10 V DC typical (max 16 V) | 10 V to 16 V |
| Linearity | ±0.05% (typ) | — |
| Temperature Compensation | 0 °C to +85 °C (on-chip) | — |
| Betriebstemperatur | -40 °C to +125 °C | -40C to +125C (per MPX2010 series datasheet) |
| Response Time | 1.0 ms (typical) | — |
| Maximum Overpressure | 75 kPa | — |
| Burst Pressure | 200 kPa | — |
| Port Configuration | Dual ports (differential), 0.19 inch / 4.93 mm tubes | — |
| Package / Mounting | 4-SIP Module (through-hole with axial tubes) | — |
| Media Compatibility | Dry air or non-corrosive gas | — |
| RoHS-Status | Compliant | [DATA_NEEDED: RoHS status of this lot] |
| Pressure Type | — | Vented Gauge |
| Operating Pressure | — | 1.45 PSI (10 kPa) |
| Maximum Pressure | — | [DATA_NEEDED: maximum overpressure rating] |
| Ausgangsspannung | — | 0 mV to 25 mV at 10 V excitation |
| Accuracy | — | +/-1% (per data brief) |
| Port Size | — | Male - 0.19" (4.93 mm) Tube |
| Port Style | — | Barbed, single vented-gauge port |
| Gehäuse / Bauform | — | 4-SIP Module |
| Montageart | — | Through-Hole |
| Compensation | — | On-chip temperature compensated and calibrated |