MPX2010DP vs MPX2010GS 비교
다음의 상세 나란히 비교: MPX2010DP 제조: NXP Semiconductors 및 MPX2010GS 제조: NXP Semiconductors. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | MPX2010DP | MPX2010GS |
|---|---|---|
| 브랜드 | NXP Semiconductors | NXP Semiconductors |
| 카테고리 | Pressure Sensors | Pressure Sensors |
| 수명 주기 상태 | 활성 | Obsolete |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $8.50 | $15.95 |
| 센서 유형 | Differential Pressure Sensor | — |
| Pressure Range | 0 to 10 kPa (0 to 1.45 PSI) | — |
| Technology | Piezoresistive (silicon strain gauge bridge) | Piezoresistive (silicon diaphragm) |
| 출력 유형 | Analog voltage, Wheatstone bridge (mV level) | Wheatstone Bridge (analog voltage) |
| Typical Full-Scale Span | 25 mV at 10 V excitation | — |
| Zero Pressure Offset | 0 mV nominally (±1.0 mV max) | — |
| 공급 전압 | 10 V DC typical (max 16 V) | 10 V to 16 V |
| Linearity | ±0.05% (typ) | — |
| Temperature Compensation | 0 °C to +85 °C (on-chip) | — |
| 동작 온도 | -40 °C to +125 °C | -40C to +125C (per MPX2010 series datasheet) |
| Response Time | 1.0 ms (typical) | — |
| Maximum Overpressure | 75 kPa | — |
| Burst Pressure | 200 kPa | — |
| Port Configuration | Dual ports (differential), 0.19 inch / 4.93 mm tubes | — |
| Package / Mounting | 4-SIP Module (through-hole with axial tubes) | — |
| Media Compatibility | Dry air or non-corrosive gas | — |
| RoHS 상태 | Compliant | [DATA_NEEDED: RoHS status of this lot] |
| Pressure Type | — | Vented Gauge |
| Operating Pressure | — | 1.45 PSI (10 kPa) |
| Maximum Pressure | — | [DATA_NEEDED: maximum overpressure rating] |
| 출력 전압 | — | 0 mV to 25 mV at 10 V excitation |
| Accuracy | — | +/-1% (per data brief) |
| Port Size | — | Male - 0.19" (4.93 mm) Tube |
| Port Style | — | Barbed, single vented-gauge port |
| 패키지 / 케이스 | — | 4-SIP Module |
| 실장 유형 | — | Through-Hole |
| Compensation | — | On-chip temperature compensated and calibrated |