MPX2010DP vs MPX2010GS तुलना

विस्तृत दोनों ओर की तुलना MPX2010DP द्वारा NXP Semiconductors और MPX2010GS द्वारा NXP Semiconductors. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

NXP Semiconductors
MPX2010DP MPX2010DP - 10 kPa Differential Pressure Sensor | NXP/STMicro

MPX2010DP - 10 kPa Differential Pressure Sensor | NXP/STMicro

MPX2010DP ✓ सक्रिय
NXP Semiconductors
MPX2010GS MPX2010GS - 10 kPa Gauge Pressure Sensor | NXP | SIP-4

MPX2010GS - 10 kPa Gauge Pressure Sensor | NXP | SIP-4

MPX2010GS Obsolete

विशेषता तुलना

पैरामीटर MPX2010DP MPX2010GS
ब्रांड NXP Semiconductors NXP Semiconductors
श्रेणी Pressure Sensors Pressure Sensors
लाइफसाइकिल स्थिति सक्रिय Obsolete
सेंसर प्रकार Differential Pressure Sensor —
Pressure Range 0 to 10 kPa (0 to 1.45 PSI) —
Technology Piezoresistive (silicon strain gauge bridge) Piezoresistive (silicon diaphragm)
आउटपुट प्रकार Analog voltage, Wheatstone bridge (mV level) Wheatstone Bridge (analog voltage)
Typical Full-Scale Span 25 mV at 10 V excitation —
Zero Pressure Offset 0 mV nominally (±1.0 mV max) —
सप्लाई वोल्टेज 10 V DC typical (max 16 V) 10 V to 16 V
Linearity ±0.05% (typ) —
Temperature Compensation 0 °C to +85 °C (on-chip) —
ऑपरेटिंग तापमान -40 °C to +125 °C -40C to +125C (per MPX2010 series datasheet)
Response Time 1.0 ms (typical) —
Maximum Overpressure 75 kPa —
Burst Pressure 200 kPa —
Port Configuration Dual ports (differential), 0.19 inch / 4.93 mm tubes —
Package / Mounting 4-SIP Module (through-hole with axial tubes) —
Media Compatibility Dry air or non-corrosive gas —
RoHS स्थिति Compliant [DATA_NEEDED: RoHS status of this lot]
Pressure Type — Vented Gauge
Operating Pressure — 1.45 PSI (10 kPa)
Maximum Pressure — [DATA_NEEDED: maximum overpressure rating]
आउटपुट वोल्टेज — 0 mV to 25 mV at 10 V excitation
Accuracy — +/-1% (per data brief)
Port Size — Male - 0.19" (4.93 mm) Tube
Port Style — Barbed, single vented-gauge port
पैकेज / केस — 4-SIP Module
माउंटिंग प्रकार — Through-Hole
Compensation — On-chip temperature compensated and calibrated

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध