MPX5010DP vs MPXV12GW6U Vergleich
Detaillierter Direktvergleich von MPX5010DP von NXP Semiconductors und MPXV12GW6U von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | MPX5010DP | MPXV12GW6U |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Pressure Sensors | Pressure Sensors |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $9,60 | $5,10 |
| Pressure Type | Differential | — |
| Operating Pressure Range | 0 kPa to 10 kPa (0 to 1.45 PSI) | 0 kPa to 10 kPa (1.45 PSI) |
| Maximum Overload Pressure | [DATA_NEEDED: max overload kPa] | — |
| Sensitivity | 450 mV/kPa (typical) | — |
| Ausgangsspannungsbereich | 0.2 V to 4.7 V | — |
| Versorgungsspannung | 4.75 V to 5.25 V (5 V typical) | — |
| Versorgungsstrom | [DATA_NEEDED: supply current mA] | — |
| Linearity | ±1.5% VFSS (typical, 0-85 C) | — |
| Betriebstemperatur | 0 C to +85 C (compensated) | -40 C to +125 C |
| Storage Temperature | [DATA_NEEDED: storage temperature C] | — |
| Port Configuration | Dual axial ports, 4.93 mm (0.19 in) tube | — |
| Gehäuse | 6-SIP Module | — |
| Ausgangstyp | Analog, ratiometric | Analog Millivolt (Wheatstone bridge) |
| Montageart | Through-hole (SIP) | Surface Mount |
| Technology | Piezoresistive, monolithic silicon, on-chip signal conditioned | — |
| RoHS-Status | Compliant | Compliant |
| Output Span | — | 0 mV to 55 mV at 3 V excitation |
| Excitation Voltage | — | 3 V typical |
| Pressure Port Type | — | Top port, 0.22" (5.59 mm) tube |
| Gehäuse / Bauform | — | 8-SMD, Gull Wing, Top Port |
| Accuracy | — | [DATA_NEEDED: linearity + temperature coefficient] |
| Configuration | — | Vented Gauge (reference to atmosphere) |
| Sensor Technology | — | Silicon piezoresistive (MEMS strain gauge) |
| Off-Pressure Offset | — | 0 mV minimum (no offset specified) |
| Compensation | — | Uncompensated (external calibration required) |
| MSL-Level | — | [DATA_NEEDED: MSL rating] |
| Bridge Resistance | — | [DATA_NEEDED: input / output bridge impedance] |
| Typical Sensitivity | — | [DATA_NEEDED: mV/kPa at 3 V] |