MPX5010DP vs MPXV12GW6U Comparaison

Comparaison détaillée côte à côte de MPX5010DP par NXP Semiconductors et MPXV12GW6U par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

NXP Semiconductors
MPX5010DP MPX5010DP - 10kPa Differential Pressure Sensor, 5V | NXP/ST

MPX5010DP - 10kPa Differential Pressure Sensor, 5V | NXP/ST

MPX5010DP ✓ Actif
NXP Semiconductors
MPXV12GW6U MPXV12GW6U - 10 kPa Uncompensated Pressure Sensor | NXP

MPXV12GW6U - 10 kPa Uncompensated Pressure Sensor | NXP

MPXV12GW6U ✓ Actif

Comparaison des spécifications

Paramètre MPX5010DP MPXV12GW6U
Marque NXP Semiconductors NXP Semiconductors
Catégorie Pressure Sensors Pressure Sensors
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $9,60 $5,10
Pressure Type Differential —
Operating Pressure Range 0 kPa to 10 kPa (0 to 1.45 PSI) 0 kPa to 10 kPa (1.45 PSI)
Maximum Overload Pressure [DATA_NEEDED: max overload kPa] —
Sensitivity 450 mV/kPa (typical) —
Plage de tension de sortie 0.2 V to 4.7 V —
Tension d'alimentation 4.75 V to 5.25 V (5 V typical) —
Courant d'alimentation [DATA_NEEDED: supply current mA] —
Linearity ±1.5% VFSS (typical, 0-85 C) —
Température de fonctionnement 0 C to +85 C (compensated) -40 C to +125 C
Storage Temperature [DATA_NEEDED: storage temperature C] —
Port Configuration Dual axial ports, 4.93 mm (0.19 in) tube —
Boîtier 6-SIP Module —
Type de sortie Analog, ratiometric Analog Millivolt (Wheatstone bridge)
Type de montage Through-hole (SIP) Surface Mount
Technology Piezoresistive, monolithic silicon, on-chip signal conditioned —
Statut RoHS Compliant Compliant
Output Span — 0 mV to 55 mV at 3 V excitation
Excitation Voltage — 3 V typical
Pressure Port Type — Top port, 0.22" (5.59 mm) tube
Boîtier / Format — 8-SMD, Gull Wing, Top Port
Accuracy — [DATA_NEEDED: linearity + temperature coefficient]
Configuration — Vented Gauge (reference to atmosphere)
Sensor Technology — Silicon piezoresistive (MEMS strain gauge)
Off-Pressure Offset — 0 mV minimum (no offset specified)
Compensation — Uncompensated (external calibration required)
Niveau MSL — [DATA_NEEDED: MSL rating]
Bridge Resistance — [DATA_NEEDED: input / output bridge impedance]
Typical Sensitivity — [DATA_NEEDED: mV/kPa at 3 V]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis