MPX5010DP vs MPXV12GW6U Comparación
Comparación detallada lado a lado de MPX5010DP por NXP Semiconductors y MPXV12GW6U por NXP Semiconductors. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | MPX5010DP | MPXV12GW6U |
|---|---|---|
| Marca | NXP Semiconductors | NXP Semiconductors |
| Categoría | Pressure Sensors | Pressure Sensors |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $9,60 | $5,10 |
| Pressure Type | Differential | — |
| Operating Pressure Range | 0 kPa to 10 kPa (0 to 1.45 PSI) | 0 kPa to 10 kPa (1.45 PSI) |
| Maximum Overload Pressure | [DATA_NEEDED: max overload kPa] | — |
| Sensitivity | 450 mV/kPa (typical) | — |
| Rango de tensión de salida | 0.2 V to 4.7 V | — |
| Tensión de alimentación | 4.75 V to 5.25 V (5 V typical) | — |
| Corriente de alimentación | [DATA_NEEDED: supply current mA] | — |
| Linearity | ±1.5% VFSS (typical, 0-85 C) | — |
| Temperatura de funcionamiento | 0 C to +85 C (compensated) | -40 C to +125 C |
| Storage Temperature | [DATA_NEEDED: storage temperature C] | — |
| Port Configuration | Dual axial ports, 4.93 mm (0.19 in) tube | — |
| Encapsulado | 6-SIP Module | — |
| Tipo de salida | Analog, ratiometric | Analog Millivolt (Wheatstone bridge) |
| Tipo de montaje | Through-hole (SIP) | Surface Mount |
| Technology | Piezoresistive, monolithic silicon, on-chip signal conditioned | — |
| Estado RoHS | Compliant | Compliant |
| Output Span | — | 0 mV to 55 mV at 3 V excitation |
| Excitation Voltage | — | 3 V typical |
| Pressure Port Type | — | Top port, 0.22" (5.59 mm) tube |
| Encapsulado / Carcasa | — | 8-SMD, Gull Wing, Top Port |
| Accuracy | — | [DATA_NEEDED: linearity + temperature coefficient] |
| Configuration | — | Vented Gauge (reference to atmosphere) |
| Sensor Technology | — | Silicon piezoresistive (MEMS strain gauge) |
| Off-Pressure Offset | — | 0 mV minimum (no offset specified) |
| Compensation | — | Uncompensated (external calibration required) |
| Nivel MSL | — | [DATA_NEEDED: MSL rating] |
| Bridge Resistance | — | [DATA_NEEDED: input / output bridge impedance] |
| Typical Sensitivity | — | [DATA_NEEDED: mV/kPa at 3 V] |