MW7IC2220NBR1 vs MW7IC2040NR1 Vergleich
Detaillierter Direktvergleich von MW7IC2220NBR1 von NXP Semiconductors und MW7IC2040NR1 von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
NXP Semiconductors
MW7IC2220NBR1 - 2W W-CDMA RF Power Amplifier 2.11-2.17 GHz | NXP
MW7IC2220NBR1 ✓ AktivSpezifikationsvergleich
| Parameter | MW7IC2220NBR1 | MW7IC2040NR1 |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | RF Amplifiers | RF Amplifiers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $21,50 | $24,20 |
| Technology | RF LDMOS (Laterally Diffused MOSFET) | RF LDMOS (Laterally Diffused MOSFET) |
| Funktion | W-CDMA Wideband Integrated Power Amplifier | Two-stage integrated power amplifier with on-chip matching |
| Frequency Range | 2000 MHz to 2200 MHz (usable), 2110-2170 MHz (W-CDMA band) | — |
| Operating Frequency (typical) | 2167.5 MHz | — |
| Average Output Power | 2 W (33 dBm) | — |
| Drain Supply Voltage (VDD) | 28 V (24 V to 32 V operating range) | — |
| Small-Signal Gain | 31 dB (typical at 2.17 GHz) | 23.5 dB |
| Quiescent Current Stage 1 (IDQ1) | 80 mA | — |
| Quiescent Current Stage 2 (IDQ2) | 300 mA | — |
| Package Type | TO-272WB-16 (over-molded plastic) | — |
| Input Matching | On-chip (50 ohm nominal) | — |
| Output Matching | On-chip (50 ohm nominal) | — |
| Characteristic Impedance | 50 ohm | — |
| Maximum Operating Temperature | 150 C | — |
| Montageart | Surface Mount (flange/over-molded) | Surface Mount (PCB solderable with bottom drain ground plane) |
| Modulation Support | W-CDMA, TD-SCDMA, LTE, multi-carrier | — |
| Test Signal | Single-Carrier W-CDMA, IQ Magnitude Clipping, PAR = 7.5 dB | — |
| ACPR Measurement | 3.84 MHz channel bandwidth at +/-5 MHz offset | — |
| Manufacturer | — | NXP Semiconductors (formerly Freescale / Motorola Semiconductor) |
| RF Type | — | General Purpose / Wideband Integrated Power Amplifier |
| Frequency Range (Application) | — | 1805 MHz to 1990 MHz (covers 1805-1880 MHz DCS/PCS and 1930-1990 MHz UMTS) |
| Frequency Range (Characterization) | — | 100 MHz to 1 GHz |
| Supply Voltage (Vdd) | — | 24 V to 32 V (nominal 28 V) |
| Maximum Supply Voltage | — | 32 V |
| Quiescent Supply Current (Idq) | — | 75 mA |
| Output Power (avg, W-CDMA) | — | 4 W (typical at rated operating conditions) |
| Modulation Compatibility | — | Single W-CDMA, GSM/EDGE, UMTS, LTE, all typical cellular BTS formats |
| Gehäuse / Bauform | — | TO-270 WBL-16 (TO-270-16 Variant, Flat Leads), plastic over-mold surface-mount |
| Pin-Anzahl | — | 16 |
| Operating Mode | — | Class-AB (multi-stage, externally biased) |
| Lead Configuration | — | Flat leads (surface-mount) |
| Betriebstemperatur | — | -40 C to +85 C (industrial base-station operating ambient; per Freescale/NXP LDMOS module family) |
| Packaging Type | — | Tape & Reel (per part suffix NR1 suffix convention) |
| RoHS-Status | — | Compliant (per NXP product family) |