SN65HVD53D vs SN65HVD54D Vergleich

Detaillierter Direktvergleich von SN65HVD53D von Texas Instruments und SN65HVD54D von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.

Texas Instruments
SN65HVD54D SN65HVD54D - 5 Mbps Full-Duplex RS-485 | Texas Instruments

SN65HVD54D - 5 Mbps Full-Duplex RS-485 | Texas Instruments

SN65HVD54D ✓ Aktiv

Spezifikationsvergleich

Parameter SN65HVD53D SN65HVD54D
Marke Texas Instruments Texas Instruments
Kategorie Interface ICs Interface ICs
Lebenszyklusstatus Aktiv Aktiv
Device Type Full-duplex RS-485 / RS-422 transceiver with enables —
Number of Drivers / Receivers 1 / 1 —
Driver Enable Polarity Active-high —
Receiver Enable Polarity Active-low —
Unit Load Option 1/8 unit-load option available (up to 256 nodes on the bus) —
Maximum Nodes on Bus 256 nodes —
Bus Pin ESD Protection Exceeds 15 kV HBM —
Driver Output Transition Time Options 1 Mbps, 5 Mbps and 25 Mbps signaling rates —
Standby Current 1 uA (both driver and receiver disabled) 1 µA
Receiver Output Glitch-free —
Standards Supported RS-485, RS-422 —
Supply Voltage Range [DATA_NEEDED: supply voltage range] —
Maximum Data Rate (this device) [DATA_NEEDED: maximum data rate for SN65HVD53D] —
Driver Output Current [DATA_NEEDED: high-output driver current] —
Receiver Sensitivity [DATA_NEEDED: receiver input sensitivity] —
Betriebstemperaturbereich -40 C to +85 C —
Gehäuse SOIC (D), 14 pins, 3.90 mm width, 0.154 inch pitch 14-pin SOIC (D)
Montageart Surface mount Surface mount
RoHS-Status [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
Product Type — High-output full-duplex RS-485 driver and receiver
Driver and Receiver Count — 1 transmitter and 1 receiver
Supported Standards — RS-422 and RS-485
Maximum Signaling Rate — 5 Mbps
Versorgungsspannung — 5 V
Receiver Unit Load — 1/8 unit load
Maximum Bus Nodes — 256 nodes
Bus-Pin ESD Protection — Exceeds 15 kV HBM
Selectable Driver Transition Rates — Options for 1 Mbps, 5 Mbps, and 25 Mbps signaling rates
Driver Enable — Active high
Receiver Enable — Active low
Betriebstemperatur — -40 °C to +85 °C
REACH Status — [DATA_NEEDED: REACH status]
Lead-Free Status — [DATA_NEEDED: lead-free status]

Datenblätter & Ressourcen

Alle Produkte durchsuchen BOM erstellen Angebot anfordern