SN65HVD53D vs SN65HVD54D Comparación
Comparación detallada lado a lado de SN65HVD53D por Texas Instruments y SN65HVD54D por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
SN65HVD53D - High-Output Full-Duplex RS-485 Transceiver | Texas Instruments
SN65HVD53D ✓ ActivoComparación de especificaciones
| Parámetro | SN65HVD53D | SN65HVD54D |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Device Type | Full-duplex RS-485 / RS-422 transceiver with enables | — |
| Number of Drivers / Receivers | 1 / 1 | — |
| Driver Enable Polarity | Active-high | — |
| Receiver Enable Polarity | Active-low | — |
| Unit Load Option | 1/8 unit-load option available (up to 256 nodes on the bus) | — |
| Maximum Nodes on Bus | 256 nodes | — |
| Bus Pin ESD Protection | Exceeds 15 kV HBM | — |
| Driver Output Transition Time Options | 1 Mbps, 5 Mbps and 25 Mbps signaling rates | — |
| Standby Current | 1 uA (both driver and receiver disabled) | 1 µA |
| Receiver Output | Glitch-free | — |
| Standards Supported | RS-485, RS-422 | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Maximum Data Rate (this device) | [DATA_NEEDED: maximum data rate for SN65HVD53D] | — |
| Driver Output Current | [DATA_NEEDED: high-output driver current] | — |
| Receiver Sensitivity | [DATA_NEEDED: receiver input sensitivity] | — |
| Rango de temperatura de funcionamiento | -40 C to +85 C | — |
| Encapsulado | SOIC (D), 14 pins, 3.90 mm width, 0.154 inch pitch | 14-pin SOIC (D) |
| Tipo de montaje | Surface mount | Surface mount |
| Estado RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Product Type | — | High-output full-duplex RS-485 driver and receiver |
| Driver and Receiver Count | — | 1 transmitter and 1 receiver |
| Supported Standards | — | RS-422 and RS-485 |
| Maximum Signaling Rate | — | 5 Mbps |
| Tensión de alimentación | — | 5 V |
| Receiver Unit Load | — | 1/8 unit load |
| Maximum Bus Nodes | — | 256 nodes |
| Bus-Pin ESD Protection | — | Exceeds 15 kV HBM |
| Selectable Driver Transition Rates | — | Options for 1 Mbps, 5 Mbps, and 25 Mbps signaling rates |
| Driver Enable | — | Active high |
| Receiver Enable | — | Active low |
| Temperatura de funcionamiento | — | -40 °C to +85 °C |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |