SN65HVD53D vs SN65HVD54D Comparaison

Comparaison détaillée côte à côte de SN65HVD53D par Texas Instruments et SN65HVD54D par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Texas Instruments
SN65HVD54D SN65HVD54D - 5 Mbps Full-Duplex RS-485 | Texas Instruments

SN65HVD54D - 5 Mbps Full-Duplex RS-485 | Texas Instruments

SN65HVD54D ✓ Actif

Comparaison des spécifications

Paramètre SN65HVD53D SN65HVD54D
Marque Texas Instruments Texas Instruments
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Device Type Full-duplex RS-485 / RS-422 transceiver with enables —
Number of Drivers / Receivers 1 / 1 —
Driver Enable Polarity Active-high —
Receiver Enable Polarity Active-low —
Unit Load Option 1/8 unit-load option available (up to 256 nodes on the bus) —
Maximum Nodes on Bus 256 nodes —
Bus Pin ESD Protection Exceeds 15 kV HBM —
Driver Output Transition Time Options 1 Mbps, 5 Mbps and 25 Mbps signaling rates —
Standby Current 1 uA (both driver and receiver disabled) 1 µA
Receiver Output Glitch-free —
Standards Supported RS-485, RS-422 —
Supply Voltage Range [DATA_NEEDED: supply voltage range] —
Maximum Data Rate (this device) [DATA_NEEDED: maximum data rate for SN65HVD53D] —
Driver Output Current [DATA_NEEDED: high-output driver current] —
Receiver Sensitivity [DATA_NEEDED: receiver input sensitivity] —
Plage de température de fonctionnement -40 C to +85 C —
Boîtier SOIC (D), 14 pins, 3.90 mm width, 0.154 inch pitch 14-pin SOIC (D)
Type de montage Surface mount Surface mount
Statut RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
Product Type — High-output full-duplex RS-485 driver and receiver
Driver and Receiver Count — 1 transmitter and 1 receiver
Supported Standards — RS-422 and RS-485
Maximum Signaling Rate — 5 Mbps
Tension d'alimentation — 5 V
Receiver Unit Load — 1/8 unit load
Maximum Bus Nodes — 256 nodes
Bus-Pin ESD Protection — Exceeds 15 kV HBM
Selectable Driver Transition Rates — Options for 1 Mbps, 5 Mbps, and 25 Mbps signaling rates
Driver Enable — Active high
Receiver Enable — Active low
Température de fonctionnement — -40 °C to +85 °C
REACH Status — [DATA_NEEDED: REACH status]
Lead-Free Status — [DATA_NEEDED: lead-free status]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis