SN65HVD53D vs SN65HVD54D Karşılaştırma

Ayrıntılı yan yana karşılaştırma SN65HVD53D tarafından Texas Instruments ve SN65HVD54D tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.

Texas Instruments
SN65HVD54D SN65HVD54D - 5 Mbps Full-Duplex RS-485 | Texas Instruments

SN65HVD54D - 5 Mbps Full-Duplex RS-485 | Texas Instruments

SN65HVD54D ✓ Aktif

Özellik Karşılaştırması

Parametre SN65HVD53D SN65HVD54D
Marka Texas Instruments Texas Instruments
Kategori Interface ICs Interface ICs
Yaşam Döngüsü Durumu Aktif Aktif
Device Type Full-duplex RS-485 / RS-422 transceiver with enables —
Number of Drivers / Receivers 1 / 1 —
Driver Enable Polarity Active-high —
Receiver Enable Polarity Active-low —
Unit Load Option 1/8 unit-load option available (up to 256 nodes on the bus) —
Maximum Nodes on Bus 256 nodes —
Bus Pin ESD Protection Exceeds 15 kV HBM —
Driver Output Transition Time Options 1 Mbps, 5 Mbps and 25 Mbps signaling rates —
Standby Current 1 uA (both driver and receiver disabled) 1 µA
Receiver Output Glitch-free —
Standards Supported RS-485, RS-422 —
Supply Voltage Range [DATA_NEEDED: supply voltage range] —
Maximum Data Rate (this device) [DATA_NEEDED: maximum data rate for SN65HVD53D] —
Driver Output Current [DATA_NEEDED: high-output driver current] —
Receiver Sensitivity [DATA_NEEDED: receiver input sensitivity] —
İşletim Sıcaklığı Aralığı -40 C to +85 C —
Paket SOIC (D), 14 pins, 3.90 mm width, 0.154 inch pitch 14-pin SOIC (D)
Montaj Türü Surface mount Surface mount
RoHS Durumu [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
Product Type — High-output full-duplex RS-485 driver and receiver
Driver and Receiver Count — 1 transmitter and 1 receiver
Supported Standards — RS-422 and RS-485
Maximum Signaling Rate — 5 Mbps
Besleme Gerilimi — 5 V
Receiver Unit Load — 1/8 unit load
Maximum Bus Nodes — 256 nodes
Bus-Pin ESD Protection — Exceeds 15 kV HBM
Selectable Driver Transition Rates — Options for 1 Mbps, 5 Mbps, and 25 Mbps signaling rates
Driver Enable — Active high
Receiver Enable — Active low
İşletim Sıcaklığı — -40 °C to +85 °C
REACH Status — [DATA_NEEDED: REACH status]
Lead-Free Status — [DATA_NEEDED: lead-free status]

Dökümanlar & Kaynaklar

Tüm Ürünleri Gözden Geçir BOM Oluştur Teklif İsteyin