SN65HVD53D vs SN65HVD54D तुलना

विस्तृत दोनों ओर की तुलना SN65HVD53D द्वारा Texas Instruments और SN65HVD54D द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Texas Instruments
SN65HVD53D SN65HVD53D - High-Output Full-Duplex RS-485 Transceiver | Texas Instruments

SN65HVD53D - High-Output Full-Duplex RS-485 Transceiver | Texas Instruments

SN65HVD53D ✓ सक्रिय
Texas Instruments
SN65HVD54D SN65HVD54D - 5 Mbps Full-Duplex RS-485 | Texas Instruments

SN65HVD54D - 5 Mbps Full-Duplex RS-485 | Texas Instruments

SN65HVD54D ✓ सक्रिय

विशेषता तुलना

पैरामीटर SN65HVD53D SN65HVD54D
ब्रांड Texas Instruments Texas Instruments
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Device Type Full-duplex RS-485 / RS-422 transceiver with enables —
Number of Drivers / Receivers 1 / 1 —
Driver Enable Polarity Active-high —
Receiver Enable Polarity Active-low —
Unit Load Option 1/8 unit-load option available (up to 256 nodes on the bus) —
Maximum Nodes on Bus 256 nodes —
Bus Pin ESD Protection Exceeds 15 kV HBM —
Driver Output Transition Time Options 1 Mbps, 5 Mbps and 25 Mbps signaling rates —
Standby Current 1 uA (both driver and receiver disabled) 1 µA
Receiver Output Glitch-free —
Standards Supported RS-485, RS-422 —
Supply Voltage Range [DATA_NEEDED: supply voltage range] —
Maximum Data Rate (this device) [DATA_NEEDED: maximum data rate for SN65HVD53D] —
Driver Output Current [DATA_NEEDED: high-output driver current] —
Receiver Sensitivity [DATA_NEEDED: receiver input sensitivity] —
ऑपरेटिंग तापमान रेंज -40 C to +85 C —
पैकेज SOIC (D), 14 pins, 3.90 mm width, 0.154 inch pitch 14-pin SOIC (D)
माउंटिंग प्रकार Surface mount Surface mount
RoHS स्थिति [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
Product Type — High-output full-duplex RS-485 driver and receiver
Driver and Receiver Count — 1 transmitter and 1 receiver
Supported Standards — RS-422 and RS-485
Maximum Signaling Rate — 5 Mbps
सप्लाई वोल्टेज — 5 V
Receiver Unit Load — 1/8 unit load
Maximum Bus Nodes — 256 nodes
Bus-Pin ESD Protection — Exceeds 15 kV HBM
Selectable Driver Transition Rates — Options for 1 Mbps, 5 Mbps, and 25 Mbps signaling rates
Driver Enable — Active high
Receiver Enable — Active low
ऑपरेटिंग तापमान — -40 °C to +85 °C
REACH Status — [DATA_NEEDED: REACH status]
Lead-Free Status — [DATA_NEEDED: lead-free status]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध