THVD1451DRBR vs SN65HVD51D Vergleich
Detaillierter Direktvergleich von THVD1451DRBR von Texas Instruments und SN65HVD51D von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
SN65HVD51D - 5Mbps Full-Duplex RS-485 Transceiver | Texas Instruments
SN65HVD51D ✓ AktivSpezifikationsvergleich
| Parameter | THVD1451DRBR | SN65HVD51D |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Funktion | RS-485 transceiver (1 driver / 1 receiver) | — |
| Protocol | RS-485 / RS-422 | — |
| Supply Voltage Range | 3.0 V to 5.5 V | 4.5 V to 5.5 V |
| Betriebstemperaturbereich | -40 °C to +125 °C | -40 °C to 85 °C |
| Signaling Rate (Maximum) | 50 Mbps | — |
| Number of Nodes on Bus | Up to 256 (1/8 unit load) | — |
| IEC 61000-4-2 Contact Discharge ESD | ±18 kV (bus pins) | — |
| IEC 61000-4-2 Air-Gap Discharge ESD | ±8 kV (bus pins) | — |
| IEC 61000-4-4 EFT | ±4 kV | — |
| Common-Mode Voltage Range | -7 V to +12 V | — |
| Receiver Input Hysteresis | 30 mV (typical) | — |
| Standby / Shutdown Current | < 5 µA | — |
| Gehäuse | VSON-8 (DRB) 3x3 mm with exposed thermal pad | 8-pin SOIC (D) |
| Montageart | Surface Mount | Surface mount |
| MSL Moisture Sensitivity | MSL 1 | — |
| RoHS-Status | Compliant | [DATA_NEEDED: RoHS compliance status] |
| Anzahl der Pins | 8 | — |
| Duplex | Half-Duplex | — |
| Product Type | — | RS-422/RS-485 full-duplex transceiver |
| Driver Count | — | 1 driver |
| Receiver Count | — | 1 receiver |
| Maximum Signaling Rate | — | 5 Mbps |
| Interface Standards | — | RS-422 and RS-485 |
| Duplex Mode | — | Full-duplex |
| Receiver Unit Load | — | 1/8 unit load |
| Maximum Bus Nodes | — | Up to 256 nodes |
| Bus-Pin ESD Protection | — | Exceeds 15 kV HBM |
| Available Driver Transition Rates | — | 1 Mbps, 5 Mbps, and 25 Mbps |
| Standby Current | — | Less than 1 µA |
| Enable Architecture | — | Fully enabled; no external enable pins |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |