THVD1451DRBR vs SN65HVD51D Perbandingan
Perbandingan bersamaan detil THVD1451DRBR dari Texas Instruments dan SN65HVD51D dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
SN65HVD51D - 5Mbps Full-Duplex RS-485 Transceiver | Texas Instruments
SN65HVD51D ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | THVD1451DRBR | SN65HVD51D |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Fungsi | RS-485 transceiver (1 driver / 1 receiver) | — |
| Protocol | RS-485 / RS-422 | — |
| Supply Voltage Range | 3.0 V to 5.5 V | 4.5 V to 5.5 V |
| Rentang Suhu Kerja | -40 °C to +125 °C | -40 °C to 85 °C |
| Signaling Rate (Maximum) | 50 Mbps | — |
| Number of Nodes on Bus | Up to 256 (1/8 unit load) | — |
| IEC 61000-4-2 Contact Discharge ESD | ±18 kV (bus pins) | — |
| IEC 61000-4-2 Air-Gap Discharge ESD | ±8 kV (bus pins) | — |
| IEC 61000-4-4 EFT | ±4 kV | — |
| Common-Mode Voltage Range | -7 V to +12 V | — |
| Receiver Input Hysteresis | 30 mV (typical) | — |
| Standby / Shutdown Current | < 5 µA | — |
| Paket | VSON-8 (DRB) 3x3 mm with exposed thermal pad | 8-pin SOIC (D) |
| Tipe Mounting | Surface Mount | Surface mount |
| MSL Moisture Sensitivity | MSL 1 | — |
| Status RoHS | Compliant | [DATA_NEEDED: RoHS compliance status] |
| Jumlah Pin | 8 | — |
| Duplex | Half-Duplex | — |
| Product Type | — | RS-422/RS-485 full-duplex transceiver |
| Driver Count | — | 1 driver |
| Receiver Count | — | 1 receiver |
| Maximum Signaling Rate | — | 5 Mbps |
| Interface Standards | — | RS-422 and RS-485 |
| Duplex Mode | — | Full-duplex |
| Receiver Unit Load | — | 1/8 unit load |
| Maximum Bus Nodes | — | Up to 256 nodes |
| Bus-Pin ESD Protection | — | Exceeds 15 kV HBM |
| Available Driver Transition Rates | — | 1 Mbps, 5 Mbps, and 25 Mbps |
| Standby Current | — | Less than 1 µA |
| Enable Architecture | — | Fully enabled; no external enable pins |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |