THVD1451DRBR vs SN65HVD51D Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng THVD1451DRBR sa pamamagitan ng Texas Instruments at SN65HVD51D sa pamamagitan ng Texas Instruments. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Texas Instruments
SN65HVD51D - 5Mbps Full-Duplex RS-485 Transceiver | Texas Instruments
SN65HVD51D ✓ NakahandaPagsanggunian na paghahambing
| Parametro | THVD1451DRBR | SN65HVD51D |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Kategorya | Interface ICs | Interface ICs |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Fungsi | RS-485 transceiver (1 driver / 1 receiver) | — |
| Protocol | RS-485 / RS-422 | — |
| Supply Voltage Range | 3.0 V to 5.5 V | 4.5 V to 5.5 V |
| Hanay ng Temperature na Operasyon | -40 °C to +125 °C | -40 °C to 85 °C |
| Signaling Rate (Maximum) | 50 Mbps | — |
| Number of Nodes on Bus | Up to 256 (1/8 unit load) | — |
| IEC 61000-4-2 Contact Discharge ESD | ±18 kV (bus pins) | — |
| IEC 61000-4-2 Air-Gap Discharge ESD | ±8 kV (bus pins) | — |
| IEC 61000-4-4 EFT | ±4 kV | — |
| Common-Mode Voltage Range | -7 V to +12 V | — |
| Receiver Input Hysteresis | 30 mV (typical) | — |
| Standby / Shutdown Current | < 5 µA | — |
| Packhaging | VSON-8 (DRB) 3x3 mm with exposed thermal pad | 8-pin SOIC (D) |
| Uri ng Pagpapasok | Surface Mount | Surface mount |
| MSL Moisture Sensitivity | MSL 1 | — |
| Tindminan RoHS | Compliant | [DATA_NEEDED: RoHS compliance status] |
| Bilang ng Pins | 8 | — |
| Duplex | Half-Duplex | — |
| Product Type | — | RS-422/RS-485 full-duplex transceiver |
| Driver Count | — | 1 driver |
| Receiver Count | — | 1 receiver |
| Maximum Signaling Rate | — | 5 Mbps |
| Interface Standards | — | RS-422 and RS-485 |
| Duplex Mode | — | Full-duplex |
| Receiver Unit Load | — | 1/8 unit load |
| Maximum Bus Nodes | — | Up to 256 nodes |
| Bus-Pin ESD Protection | — | Exceeds 15 kV HBM |
| Available Driver Transition Rates | — | 1 Mbps, 5 Mbps, and 25 Mbps |
| Standby Current | — | Less than 1 µA |
| Enable Architecture | — | Fully enabled; no external enable pins |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |