THVD1451DRBR vs SN65HVD51D Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci THVD1451DRBR disebabkan oleh Texas Instruments dan SN65HVD51D disebabkan oleh Texas Instruments. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Texas Instruments
SN65HVD51D - 5Mbps Full-Duplex RS-485 Transceiver | Texas Instruments
SN65HVD51D ✓ AktifPengandingan Spesifikasi
| Parametr | THVD1451DRBR | SN65HVD51D |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Fungsi | RS-485 transceiver (1 driver / 1 receiver) | — |
| Protocol | RS-485 / RS-422 | — |
| Supply Voltage Range | 3.0 V to 5.5 V | 4.5 V to 5.5 V |
| Gambaran Suhu Operasi | -40 °C to +125 °C | -40 °C to 85 °C |
| Signaling Rate (Maximum) | 50 Mbps | — |
| Number of Nodes on Bus | Up to 256 (1/8 unit load) | — |
| IEC 61000-4-2 Contact Discharge ESD | ±18 kV (bus pins) | — |
| IEC 61000-4-2 Air-Gap Discharge ESD | ±8 kV (bus pins) | — |
| IEC 61000-4-4 EFT | ±4 kV | — |
| Common-Mode Voltage Range | -7 V to +12 V | — |
| Receiver Input Hysteresis | 30 mV (typical) | — |
| Standby / Shutdown Current | < 5 µA | — |
| Kemasan | VSON-8 (DRB) 3x3 mm with exposed thermal pad | 8-pin SOIC (D) |
| Jenis Pemasangan | Surface Mount | Surface mount |
| MSL Moisture Sensitivity | MSL 1 | — |
| Status RoHS | Compliant | [DATA_NEEDED: RoHS compliance status] |
| Bilangan Pin | 8 | — |
| Duplex | Half-Duplex | — |
| Product Type | — | RS-422/RS-485 full-duplex transceiver |
| Driver Count | — | 1 driver |
| Receiver Count | — | 1 receiver |
| Maximum Signaling Rate | — | 5 Mbps |
| Interface Standards | — | RS-422 and RS-485 |
| Duplex Mode | — | Full-duplex |
| Receiver Unit Load | — | 1/8 unit load |
| Maximum Bus Nodes | — | Up to 256 nodes |
| Bus-Pin ESD Protection | — | Exceeds 15 kV HBM |
| Available Driver Transition Rates | — | 1 Mbps, 5 Mbps, and 25 Mbps |
| Standby Current | — | Less than 1 µA |
| Enable Architecture | — | Fully enabled; no external enable pins |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |