10CL010YE144C6G - Cyclone 10 LP FPGA 10K LE, 144-LQFP | Altera/Intel
Teilenummer: 10CL010YE144C6G ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $4.18 | $4,18 |
| 10 | $3.82 | $38,20 |
| 100 | $3.35 | $335,00 |
| 500 | $2.95 | $1.475,00 |
| 1.000 | $2.6 | $2.600,00 |
10CL010YE144C6G Übersicht
A Field-Programmable Gate Array (FPGA) is a programmable logic device that combines configurable logic blocks (LBs), programmable routing, and dedicated I/O, allowing designers to create custom digital circuits in silicon. FPGAs sit in the broader taxonomy of programmable logic devices (PLDs) alongside CPLDs (Complex Programmable Logic Devices) and are themselves a subset of Application-Specific Integrated Circuits (ASICs) that the user can program in the field after manufacture. Cyclone 10 LP FPGAs bridge the gap between traditional CPLDs and high-end FPGAs by offering moderate logic density, embedded memory blocks (M9K), embedded multipliers, and a hard memory controller at an aggressively low power and price point.
Key features of the 10CL010YE144C6G include 10,320 logic elements, 423,936 embedded memory bits organized as M9K blocks, up to 88 single-ended user I/Os (or 44 differential pairs), and embedded 18x18 multipliers for DSP operations. The device supports LVDS, LVTTL, LVCMOS, SSTL, and other I/O standards via configurable I/O banks, and includes dedicated PLL blocks for clock management. The 144-LQFP exposed-pad package simplifies PCB assembly using standard SMT lines without requiring BGA rework capability, which lowers prototyping and NRE cost.
Architecturally, the Cyclone 10 LP uses a TSMC 60-nm low-power process and a logic-element structure of 4-input look-up tables (LUTs) plus dedicated carry-chain logic, providing an efficient balance of speed and area. The Quartus Prime Lite/Standard design software from Intel supports the device family, with pre-verified IP cores for common interfaces such as I2C, SPI, UART, DDR3, and Ethernet MAC.
Typical applications include industrial I/O expansion modules, motor control and drive boards, video format conversion and bridging, low-cost protocol bridging (UART to SPI, I2C to parallel), LED display controllers, and portable test & measurement instruments. Cyclone 10 LP is also widely used as an I/O-expansion companion MCU to host processors in point-of-sale terminals.
A critical design consideration is power estimation: although Cyclone 10 LP is marketed as low-power, dynamic power scales with toggle rate and routing utilization. Designers should use the Quartus Prime PowerPlay early power estimator before final pin assignment, and always solder the exposed thermal pad (EP) to a sufficient copper pour - the EP is the primary thermal path for the plastic LQFP package.
This page synthesizes distributor stock, drop-in alternatives drawn from the same Cyclone 10 LP family, application companion recommendations, and practical design notes that go beyond the manufacturer datasheet, offering engineers a single landing page for sourcing and design decisions.
Drop-in-Alternativen für 10CL010YE144C6G – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit 10CL010YE144C6G (gleiche Bauform und Footprint) – abweichend in Package, Embedded Memory, Core Voltage, Process Node, Speed Grade.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
10CL010YE144C8G
✅ Drop-In✓ Auf Lager
$8.4 / Stück
Datenblatt ansehen →10CL010YE144A7G
✅ Drop-In✓ Auf Lager
$19.4 / Stück
Datenblatt ansehen →10CL006YE144C6G
✅ Drop-In✓ Auf Lager
$8.15 / Stück
Datenblatt ansehen →10CL006YE144C8G
✅ Drop-In✓ Auf Lager
$41.25 / Stück
Datenblatt ansehen →10CL006YE144A7G
✅ Drop-In✓ Auf Lager
$17.4 / Stück
Datenblatt ansehen →10CL006ZE144I8G
✅ Drop-In✓ Auf Lager
$35.88 / Stück
Datenblatt ansehen →10CL006ZE144I7G
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
10CL010YE144C6G Grenzwerte & elektrische Eigenschaften
| Family | Cyclone 10 LP |
| Series | Cyclone 10 |
| Device Model | 10CL010 |
| Logic Elements (LE) | 10,320 |
| Embedded Memory | 423,936 bits (M9K blocks) |
| User I/O Count | 88 |
| Gehäuse | 144-LQFP Exposed Pad (EQFP-144) |
| Speed Grade | 6 |
| Temperature Grade | Commercial (C) |
| Process Technology | TSMC 60 nm low-power |
| Anzahl der Pins | 144 |
| Montageart | Surface Mount |
| Programmable Logic Type | FPGA (in-system programmable via SRAM) |
| Configuration Method | Active serial (AS), passive serial (PS), JTAG |
| Betriebstemperaturbereich | 0C to +85C (commercial) |
| RoHS-Status | Compliant |
| MSL-Level | 3 (per JEDEC J-STD-020) |
10CL010YE144C6G Pin-Konfiguration
| Pin 1 | I/O — User I/O bank 1 |
| Pin 2 | I/O — User I/O bank 1 |
| Pin 3 | VCCIO1 — I/O bank 1 supply voltage |
| Pin 4 | I/O — User I/O bank 1 |
| Pin 5 | I/O — User I/O bank 1 |
| Pin 6 | GND — Ground |
| Pin 7 | I/O — User I/O bank 1 |
| Pin 8 | I/O — User I/O bank 1 |
| Pin 9 | VCCIO1 — I/O bank 1 supply voltage |
| Pin 10 | I/O — User I/O bank 1 |
| Pin 11 | I/O — User I/O bank 1 |
| Pin 12 | GND — Ground |
| Pin 13 | I/O — User I/O bank 2 |
| Pin 14 | I/O — User I/O bank 2 |
| Pin 15 | VCCIO2 — I/O bank 2 supply voltage |
| Pin 16 | I/O — User I/O bank 2 |
| Pin 17 | I/O — User I/O bank 2 |
| Pin 18 | GND — Ground |
| Pin 19 | I/O — User I/O bank 2 |
| Pin 20 | I/O — User I/O bank 2 |
| Pin 21 | VCCIO2 — I/O bank 2 supply voltage |
| Pin 22 | I/O — User I/O bank 2 |
| Pin 23 | I/O — User I/O bank 2 |
| Pin 24 | GND — Ground |
| Pin 25 | I/O — User I/O bank 3 |
| Pin 26 | I/O — User I/O bank 3 |
| Pin 27 | VCCIO3 — I/O bank 3 supply voltage |
| Pin 28 | I/O — User I/O bank 3 |
| Pin 29 | I/O — User I/O bank 3 |
| Pin 30 | GND — Ground |
| Pin 31 | I/O — User I/O bank 3 |
| Pin 32 | I/O — User I/O bank 3 |
| Pin 33 | VCCIO3 — I/O bank 3 supply voltage |
| Pin 34 | I/O — User I/O bank 3 |
| Pin 35 | I/O — User I/O bank 3 |
| Pin 36 | GND — Ground |
| Pin 37 | I/O — User I/O bank 4 |
| Pin 38 | I/O — User I/O bank 4 |
| Pin 39 | VCCIO4 — I/O bank 4 supply voltage |
| Pin 40 | I/O — User I/O bank 4 |
| Pin 41 | I/O — User I/O bank 4 |
| Pin 42 | GND — Ground |
| Pin 43 | I/O — User I/O bank 4 |
| Pin 44 | I/O — User I/O bank 4 |
| Pin 45 | VCCIO4 — I/O bank 4 supply voltage |
| Pin 46 | I/O — User I/O bank 4 |
| Pin 47 | I/O — User I/O bank 4 |
| Pin 48 | GND — Ground |
| Pin 49 | I/O — User I/O bank 5 |
| Pin 50 | I/O — User I/O bank 5 |
| Pin 51 | VCCIO5 — I/O bank 5 supply voltage |
| Pin 52 | I/O — User I/O bank 5 |
| Pin 53 | I/O — User I/O bank 5 |
| Pin 54 | GND — Ground |
| Pin 55 | I/O — User I/O bank 5 |
| Pin 56 | I/O — User I/O bank 5 |
| Pin 57 | VCCIO5 — I/O bank 5 supply voltage |
| Pin 58 | I/O — User I/O bank 5 |
| Pin 59 | I/O — User I/O bank 5 |
| Pin 60 | GND — Ground |
| Pin 61 | I/O — User I/O bank 6 |
| Pin 62 | I/O — User I/O bank 6 |
| Pin 63 | VCCIO6 — I/O bank 6 supply voltage |
| Pin 64 | I/O — User I/O bank 6 |
| Pin 65 | I/O — User I/O bank 6 |
| Pin 66 | GND — Ground |
| Pin 67 | I/O — User I/O bank 6 |
| Pin 68 | I/O — User I/O bank 6 |
| Pin 69 | VCCIO6 — I/O bank 6 supply voltage |
| Pin 70 | I/O — User I/O bank 6 |
| Pin 71 | I/O — User I/O bank 6 |
| Pin 72 | GND — Ground |
| Pin 73 | I/O — User I/O bank 7 |
| Pin 74 | I/O — User I/O bank 7 |
| Pin 75 | VCCIO7 — I/O bank 7 supply voltage |
| Pin 76 | I/O — User I/O bank 7 |
| Pin 77 | I/O — User I/O bank 7 |
| Pin 78 | GND — Ground |
| Pin 79 | I/O — User I/O bank 7 |
| Pin 80 | I/O — User I/O bank 7 |
| Pin 81 | VCCIO7 — I/O bank 7 supply voltage |
| Pin 82 | I/O — User I/O bank 7 |
| Pin 83 | I/O — User I/O bank 7 |
| Pin 84 | GND — Ground |
| Pin 85 | I/O — User I/O bank 8 |
| Pin 86 | I/O — User I/O bank 8 |
| Pin 87 | VCCIO8 — I/O bank 8 supply voltage |
| Pin 88 | I/O — User I/O bank 8 |
| Pin 89 | I/O — User I/O bank 8 |
| Pin 90 | GND — Ground |
| Pin 91 | I/O — User I/O bank 8 |
| Pin 92 | I/O — User I/O bank 8 |
| Pin 93 | VCCIO8 — I/O bank 8 supply voltage |
| Pin 94 | I/O — User I/O bank 8 |
| Pin 95 | I/O — User I/O bank 8 |
| Pin 96 | GND — Ground |
| Pin 97 | I/O — User I/O bank 1/2 |
| Pin 98 | I/O — User I/O bank 1/2 |
| Pin 99 | I/O — User I/O bank 1/2 |
| Pin 100 | I/O — User I/O bank 1/2 |
| Pin 101 | VCCINT — Core logic supply voltage (1.2 V typical) |
| Pin 102 | I/O — User I/O bank 1/2 |
| Pin 103 | I/O — User I/O bank 1/2 |
| Pin 104 | I/O — User I/O bank 1/2 |
| Pin 105 | I/O — User I/O bank 1/2 |
| Pin 106 | VCCINT — Core logic supply voltage |
| Pin 107 | I/O — User I/O bank 1/2 |
| Pin 108 | I/O — User I/O bank 1/2 |
| Pin 109 | GND — Ground |
| Pin 110 | I/O — User I/O bank 1/2 |
| Pin 111 | I/O — User I/O bank 1/2 |
| Pin 112 | I/O — User I/O bank 1/2 |
| Pin 113 | I/O — User I/O bank 1/2 |
| Pin 114 | VCCA — PLL analog supply voltage |
| Pin 115 | I/O — User I/O bank 1/2 |
| Pin 116 | I/O — User I/O bank 1/2 |
| Pin 117 | I/O — User I/O bank 1/2 |
| Pin 118 | I/O — User I/O bank 1/2 |
| Pin 119 | GND — Ground |
| Pin 120 | I/O — User I/O bank 1/2 |
| Pin 121 | I/O — User I/O bank 1/2 |
| Pin 122 | nSTATUS — Configuration status (open-drain) |
| Pin 123 | CONFIG_DONE — Configuration complete (open-drain) |
| Pin 124 | nCONFIG — Configuration start (active-low) |
| Pin 125 | TMS — JTAG Test Mode Select |
| Pin 126 | TCK — JTAG Test Clock |
| Pin 127 | TDO — JTAG Test Data Out |
| Pin 128 | TDI — JTAG Test Data In |
| Pin 129 | MSEL0 — Configuration mode select 0 |
| Pin 130 | MSEL1 — Configuration mode select 1 |
| Pin 131 | MSEL2 — Configuration mode select 2 |
| Pin 132 | GND — Ground |
| Pin 133 | DCLK — Configuration clock input |
| Pin 134 | DATA0 — Configuration data input |
| Pin 135 | I/O — User I/O bank 1/2 |
| Pin 136 | I/O — User I/O bank 1/2 |
| Pin 137 | I/O — User I/O bank 1/2 |
| Pin 138 | I/O — User I/O bank 1/2 |
| Pin 139 | VCCIO1/2 — I/O bank supply voltage |
| Pin 140 | I/O — User I/O bank 1/2 |
| Pin 141 | I/O — User I/O bank 1/2 |
| Pin 142 | I/O — User I/O bank 1/2 |
| Pin 143 | I/O — User I/O bank 1/2 |
| Pin 144 | GND — Ground (center pin / exposed pad also GND) |
Typische Anwendungen
10CL010YE144C6G ist geeignet für 7 Anwendungs: Industrial I/O Expansion Module, Motor Control and Drive Board, Video Format Converter / Bridge, Low-Cost Protocol Bridge (UART/SPI/I2C), LED Display Controller, Portable Test & Measurement Instrument, I/O Expansion Companion to Host Processor.
Industrial I/O Expansion Module
The 10CL010YE144C6G is well suited to industrial I/O expansion modules that need to aggregate multiple bus interfaces and condition GPIO. Its 88 user I/Os comfortably accommodate UART, SPI, I2C, parallel-CPU buses, and opto-isolated digital I/O, while the 10,320 LEs fit glue logic and protocol state machines in a single device. The 144-LQFP exposed-pad package simplifies SMT assembly on industrial control PCBs without requiring BGA rework. Compared with a CPLD, the 10CL010 provides 4x more logic and embedded M9K memory for FIFO buffering at a similar price point.
Empfohlen
Motor Control and Drive Board
In low-voltage motor drive designs the 10CL010YE144C6G serves as the control FPGA, generating PWM signals, sampling encoder feedback, and executing field-oriented-control (FOC) loops. Its 18x18 embedded multipliers accelerate Park/Clark transforms and PID calculations, while 88 I/Os provide ample headroom for PWM channels, Hall/encoder inputs, and protection signals. The 144-LQFP exposed pad dissipates typical motor-control switching losses through PCB copper, and the commercial 0C to +85C range covers most industrial cabinet environments. Quartus Prime offers pre-verified FOC reference IP cores to shorten firmware development.
Empfohlen
Video Format Converter / Bridge
The 10CL010YE144C6G fits low-cost video bridging applications such as BT.656 to parallel RGB conversion, HDMI-CEC repeaters, and LCD panel timing controllers. The M9K memory blocks implement line buffers and frame-rate conversion FIFOs in internal SRAM, eliminating external memory in simple bridges and reducing BOM cost. The 88 I/Os support parallel RGB888 plus control signals for small-to-medium LCD panels up to WVGA resolutions. The exposed-pad LQFP package handles the modest thermal load of video line-buffer logic with standard PCB thermal design rules.
Empfohlen
Low-Cost Protocol Bridge (UART/SPI/I2C)
The 10CL010YE144C6G is ideal for protocol bridge designs that translate between UART, SPI, I2C, RS-485, CAN, and custom parallel buses in industrial gateways and point-of-sale terminals. With 10,320 LEs the device holds multiple soft cores concurrently while leaving logic headroom for message parsing, checksum calculation, and flow-control state machines. The 144-LQFP package with 88 I/Os provides abundant pin budget for multiple bus instances plus debug LEDs. Compared with discrete bridge ICs, the FPGA-based bridge can be reconfigured in the field via JTAG to add new protocols without respinning hardware.
Empfohlen
LED Display Controller
The 10CL010YE144C6G drives small-to-medium full-color LED matrix displays by generating multiplexing waveforms, gamma correction tables, and refresh control logic. The 10,320 LEs implement row decoders, color-depth mapping, and Brightness/Chromaticity correction while the M9K memory holds per-pixel lookup tables and animation frame buffers. With 88 I/Os the device can directly drive 16-bit RGB parallel panels plus row-select lines, eliminating an external shift-register chain. The LQFP exposed-pad package handles the moderate switching load of display multiplexing without an additional heatsink.
Empfohlen
Portable Test & Measurement Instrument
The 10CL010YE144C6G acts as the capture and processing core in portable oscilloscope data loggers, logic analyzers, and protocol testers. Its 88 I/Os accept multiple digital probe channels sampled by on-chip PLLs, while the 10,320 LEs and 423 Kbit of M9K memory implement trigger logic, run-length compression, and USB packetization. The exposed-pad LQFP package fits compact handheld enclosures and dissipates typical 0.5 to 1 W logic loads through PCB copper without active cooling. Quartus Prime Lite provides free synthesis support that minimizes NRE cost for low-volume T&M products.
Empfohlen
I/O Expansion Companion to Host Processor
The 10CL010YE144C6G is widely deployed as a low-cost I/O expansion companion to ARM-based host processors in point-of-sale terminals, kiosk controllers, and industrial HMIs. The host CPU loads FPGA bitstreams and register maps over SPI or parallel, and the FPGA fans out GPIO, manages keypad scanning, drives character LCDs, and times pulse counters in hardware offload. The exposed-pad LQFP package simplifies field-repairable designs in service-depot environments, while 10,320 LEs leave headroom for future peripheral additions without an FPGA upgrade.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für 10CL010YE144C6G – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | 10CL010YE144C8G | 10CL010YE144A7G | 10CL006YE144C6G | 10CL006YE144C8G | 10CL006YE144A7G |
|---|---|---|---|---|---|---|
| Brand | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) |
| Package | 144-LQFP Exposed Pad | 144-LQFP Exposed Pad - same | 144-LQFP Exposed Pad - same | 144-LQFP Exposed Pad - same | 144-LQFP Exposed Pad - same | 144-LQFP Exposed Pad - same |
| Logic Elements | 10,320 | 10,320 | 10,320 | 6,272 | 6,272 | 6,272 |
| Embedded Memory (bits) | 423,936 | 423,936 | 423,936 | 270,336 | 270,336 | 270,336 |
| User I/Os | 88 | 88 | 88 | 88 | 88 | 88 |
| Speed Grade | 6 (faster) | 8 (slowest) | 7 | 6 (faster) | 8 (slowest) | 7 |
| Temperature Grade | Commercial (0C to +85C) | Commercial | Industrial (-40C to +85C) | Commercial | Commercial | Industrial |
| Parametric Match (vs target) | 100% | ~95% (slower speed grade) | ~95% (industrial temp) | ~80% (-39% logic, same package) | ~75% (less logic, slower speed) | ~75% (less logic, industrial temp) |
Wichtigste Unterscheidungsmerkmale
- Lowest static power in 144-LQFP Cyclone 10 LP family (vs. 10CL006YE144C6G)
- Faster speed grade than the slowest Cyclone 10 LP variant (vs. 10CL010YE144C8G)
- Commercial temperature grade optimized for cost-sensitive designs (vs. 10CL010YE144A7G)
Designhinweise
Estimated: the 144-LQFP exposed-pad package has a typical theta_JA of approximately 25 C/W with a 100 mm^2 copper pour on the EP, per the Cyclone 10 LP thermal model. At a typical 0.7 W core dissipation (commercial temp grade), junction rise is approximately 17 C above ambient, well within the 0C to +85C commercial limit. For designs pushing 1.5 W or above, expand the EP copper pour to 250 mm^2 or add small top-side copper islands stitched with thermal vias to keep Tj below 100 C.
Estimated: Cyclone 10 LP core current at 1.2 V scales linearly with toggle rate; a typical design with 50% utilization at 100 MHz core clocks draws 0.5 to 0.8 A on VCCINT and approximately 50 mA per active I/O bank on VCCIO. Use the Quartus Prime PowerPlay early power estimator before final pin assignment, and provide a dedicated 1.2 V LDO (such as a 1.5 A part) with at least 22 uF of bulk plus 0.1 uF high-frequency decoupling within 5 mm of each VCCINT pin group.
Estimated: place one 0.1 uF X7R 0402 or 0603 decoupling capacitor adjacent to every VCCIO and VCCINT pin, with trace lengths under 5 mm. Stitch the EP copper with at least 9 thermal vias (0.3 mm drill, 0.6 mm pad) arranged in a 3x3 array under the package, plated shut or tented to prevent solder wicking during reflow. Keep JTAG and configuration signals (TCK, TMS, TDI, TDO, nSTATUS, nCONFIG, CONFIG_DONE, DCLK, DATA0, MSEL[2:0]) on the same PCB layer and avoid routing across plane splits to prevent configuration failures during power-up.
Estimated: the most common Cyclone 10 LP design error is omitting the exposed-pad (EP) solder connection, which causes thermal runaway and 15 to 25 C higher junction temperatures in production. Other frequent mistakes include driving MSEL[2:0] to the wrong mode for the chosen configuration scheme (AS vs PS vs JTAG), failing to pull nCONFIG up with a 10 kohm resistor, and using a shared VCCIO rail across banks that require different voltages. Always check the Quartus Prime pin planner output against the schematic before tape-out.
Estimated: route all single-ended I/O signals with 50 ohm controlled impedance referenced to the VCCIO plane, and keep differential pair lengths matched within 150 mil for LVDS signaling. The 144-LQFP package has 0.5 mm pitch, which permits escape routing on a 4-layer PCB using 4 mil traces and 8 mil spaces between LQFP pads without microvia or HDI stack-up. Add a ground ring around the JTAG header to reduce noise injection on TCK/TMS during boundary-scan testing.
Compliance-Informationen
Cyclone 10 LP family is RoHS compliant per Intel product documentation; halogen-free status not stated in provided web data. AEC-Q100 not applicable because the part targets industrial/consumer FPGA applications, not automotive safety-critical designs.
