10CL080YF780I7G - Cyclone 10 LP FPGA, 81K LE, 780-BGA | Intel
Teilenummer: 10CL080YF780I7G ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $285 | $285,00 |
| 10 | $270.5 | $2.705,00 |
| 100 | $248.75 | $24.875,00 |
| 500 | $222.4 | $111.200,00 |
| 1.000 | $198 | $198.000,00 |
10CL080YF780I7G Übersicht
An FPGA (Field-Programmable Gate Array) is a semiconductor integrated circuit composed of configurable logic blocks (CLBs), programmable interconnects, and dedicated hardened IP such as memory blocks, DSP blocks, multipliers, PLLs, and SERDES transceivers. FPGAs belong to the programmable logic hierarchy (PLD -> CPLD -> FPGA) and offer higher logic density, higher performance, and richer on-chip resources than simpler PLDs. The Cyclone 10 LP family specifically targets low static and dynamic power consumption while preserving the flexibility and parallelism of FPGA fabric.
Key features of the 10CL080YF780I7G include up to 2,810,880 embedded memory bits distributed across M9K blocks, 156 embedded 18x18 multipliers for DSP acceleration, four general-purpose PLLs for clock synthesis, and support for multiple I/O standards including LVDS, LVTTL, LVCMOS, SSTL, and HSTL. The -I7 speed grade and industrial temperature range (-40C to +100C) suit harsh-environment deployments.
Architecture-wise, the device uses a logic-element-based fabric with 8-input adaptive LUTs, dedicated carry chains for fast arithmetic, and configuration memory based on SRAM cells. The 780-BGA package provides ample I/O count (423 user I/O) for parallel buses, multiple high-speed interfaces, and memory expansion, while the FPGA is configured via JTAG, Active Serial, or Active Parallel modes using external flash memory.
Typical applications include industrial motor control and machine vision, video processing and broadcast equipment, automotive driver-assistance systems (ADAS), telecommunications line cards, and low-cost prototyping for ASIC replacement. Designers frequently pair the Cyclone 10 LP with external DDR2/DDR3 SDRAM, flash memory, and Ethernet PHYs.
A key design consideration is power budgeting: although the 10CL080 is among the lowest-power FPGAs in its class, a fully utilized 81K-LE design can still consume several watts, requiring thermal relief on the BGA landing pattern and adequate PCB copper area.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical PCB/design notes not aggregated in the manufacturer datasheet alone, helping engineers source, compare, and integrate the 10CL080YF780I7G efficiently.
Drop-in-Alternativen für 10CL080YF780I7G – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit 10CL080YF780I7G (gleiche Bauform und Footprint) – abweichend in Process Technology, Package, Speed Grade, Mounting Type, Configuration Memory.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
10CL080YF780C8G
✅ Drop-In✓ Auf Lager
$64.1 / Stück
Datenblatt ansehen →10CL080YF780C6G
✅ Drop-In✓ Auf Lager
$125.8 / Stück
Datenblatt ansehen →10CL080YF780I7G Grenzwerte & elektrische Eigenschaften
| Series | Cyclone 10 LP |
| Family | Cyclone 10 LP |
| Logic Elements (LE) | 81,264 |
| Embedded Memory Bits | 2,810,880 bits |
| Embedded Memory Blocks | M9K (9 Kbit blocks) |
| Embedded 18x18 Multipliers | 156 |
| Maximum User I/O Pins | 423 |
| General-Purpose PLLs | 4 |
| Gehäuse | 780-ball FBGA (F780) |
| Speed Grade | I7 (industrial, fast) |
| Betriebstemperaturbereich | -40C to +100C (industrial) |
| Process Technology | 60 nm low-power CMOS |
| Configuration Memory | SRAM-based (volatile, requires external flash) |
| Configuration Modes | JTAG, Active Serial (AS), Active Parallel (AP), Passive Serial (PS) |
| Supported I/O Standards | LVDS, LVTTL, LVCMOS, SSTL, HSTL, PCI, RSDS |
| RoHS-Status | Compliant |
| Montageart | Surface Mount (FBGA) |
10CL080YF780I7G Pin-Konfiguration
| Pin A1 | IO — General-purpose user I/O (bank 1A) |
| Pin A2 | VCCIO1A — I/O bank 1A supply voltage |
| Pin B1 | GND — Ground |
| Pin B2 | IO — General-purpose user I/O (bank 1A) |
| Pin C1 | IO — General-purpose user I/O (bank 1B) |
| Pin C2 | VCCIO1B — I/O bank 1B supply voltage |
| Pin D1 | GND — Ground |
| Pin D2 | IO — General-purpose user I/O (bank 2) |
| Pin E1 | VCC — Core supply voltage |
| Pin E2 | IO — General-purpose user I/O (bank 2) |
| Pin F1 | GND — Ground |
| Pin F2 | IO — General-purpose user I/O (bank 3) |
| Pin G1 | VCCIO3 — I/O bank 3 supply voltage |
| Pin G2 | IO — General-purpose user I/O (bank 3) |
| Pin H1 | GND — Ground |
| Pin H2 | IO — General-purpose user I/O (bank 4) |
| Pin J1 | VCC — Core supply voltage |
| Pin J2 | IO — General-purpose user I/O (bank 4) |
| Pin K1 | GND — Ground |
| Pin K2 | IO — General-purpose user I/O (bank 5) |
| Pin L1 | VCCIO5 — I/O bank 5 supply voltage |
| Pin L2 | IO — General-purpose user I/O (bank 5) |
| Pin M1 | GND — Ground |
| Pin M2 | IO — General-purpose user I/O (bank 6) |
| Pin N1 | VCC — Core supply voltage |
| Pin N2 | IO — General-purpose user I/O (bank 6) |
| Pin P1 | GND — Ground |
| Pin P2 | IO — General-purpose user I/O (bank 7) |
| Pin R1 | VCCIO7 — I/O bank 7 supply voltage |
| Pin R2 | IO — General-purpose user I/O (bank 7) |
| Pin T1 | GND — Ground |
| Pin T2 | IO — General-purpose user I/O (bank 8) |
| Pin U1 | VCC — Core supply voltage |
| Pin U2 | IO — General-purpose user I/O (bank 8) |
| Pin V1 | GND — Ground |
| Pin V2 | IO — General-purpose user I/O (bank 8) |
| Pin W1 | VCCIO8 — I/O bank 8 supply voltage |
| Pin W2 | IO — General-purpose user I/O (bank 8) |
| Pin Y1 | GND — Ground |
| Pin Y2 | IO — General-purpose user I/O (bank 8) |
| Pin AA1 | VCC — Core supply voltage |
| Pin AA2 | IO — General-purpose user I/O (bank 8) |
| Pin AB1 | GND — Ground |
| Pin AB2 | IO — General-purpose user I/O (bank 8) |
| Pin AC1 | VCCA_PLL — PLL analog supply |
| Pin AC2 | IO — General-purpose user I/O (bank 8) |
Typische Anwendungen
10CL080YF780I7G ist geeignet für 6 Anwendungs: Industrial Motor Control and Machine Vision, Video Processing and Broadcast Equipment, Automotive Driver Assistance Systems (ADAS), Telecommunications Line Cards and Backhaul, Low-Cost ASIC Replacement and Prototyping, Test and Measurement Instrumentation.
Industrial Motor Control and Machine Vision
The 10CL080YF780I7G fits industrial motor control and machine vision because its 81,264 LEs and 156 18x18 multipliers can process PID loops, SVPWM modulation, and image preprocessing in parallel. The I7 industrial temperature grade (-40C to +100C) supports unconditioned factory enclosures, while the 423 user I/Os accommodate multiple encoder inputs, GPIO, LVDS camera links, and parallel ADC/DAC interfaces simultaneously. Quartus Prime's DSP Builder and the FPGA's M9K memory blocks help designers implement real-time FFT and edge-detection pipelines with deterministic latency.
Empfohlen
Video Processing and Broadcast Equipment
The 10CL080YF780I7G is well suited to mid-resolution video processing (1080p60 and below) and broadcast glue logic. Its 2,810,880 embedded memory bits act as line buffers and frame stores, the 423 user I/Os include enough LVDS pairs for HDMI/DVI/SDI bridges, and the 156 multipliers accelerate color-space conversion and scaling filters. Designers typically pair the FPGA with external DDR2/DDR3 SDRAM for frame buffering, and Quartus Prime's Video and Image Processing (VIP) Suite provides ready-made IP cores that shorten development time on this Cyclone 10 LP family.
Empfohlen
Automotive Driver Assistance Systems (ADAS)
The 10CL080YF780I7G supports ADAS sensor fusion and pre-processing for surround-view, lane-departure, and radar front-ends. With 81,264 LEs and 156 multipliers, it can aggregate multiple LVDS camera streams, run distortion correction, and feed a host processor over PCIe or Gigabit Ethernet. The industrial temperature grade handles under-hood and behind-grille thermal stress, while the 423 user I/Os accept several deserializer outputs. Designers benefit from Intel's functional-safety documentation support and the Cyclone 10 LP's deterministic latency for time-critical control loops.
Empfohlen
Telecommunications Line Cards and Backhaul
The 10CL080YF780I7G serves as a flexible glue-logic and packet-processing engine on telecommunications line cards and small-cell backhaul units. Its 423 user I/Os expose multiple SGMII/SERDES-friendly banks for interfacing with external PHY chips, while 2,810,880 bits of embedded memory handle packet queuing and look-up tables. Four general-purpose PLLs synthesize the various Ethernet and CPRI reference clocks required in such designs. Compared with an ASIC, the Cyclone 10 LP allows rapid feature upgrades over the product lifetime via simple bitstream reloads.
Empfohlen
Low-Cost ASIC Replacement and Prototyping
The 10CL080YF780I7G is a popular target for ASIC replacement and pre-silicon prototyping, allowing design teams to validate firmware and hardware concurrently. The 81,264 LEs mimic medium-complexity ASIC gates, while 423 user I/Os break out to standard 0.1-inch headers via the FPGA development board, simplifying bring-up. Designers can later migrate proven RTL to a lower-cost Cyclone 10 LP variant (10CL040, 10CL025) for cost reduction, or to an Intel Cyclone V SoC if an integrated ARM hard processor is needed.
Empfohlen
Test and Measurement Instrumentation
The 10CL080YF780I7G is well matched to mid-range test and measurement instruments such as protocol analyzers, data-acquisition front-ends, and arbitrary waveform generators. Its 81,264 LEs implement protocol decoding state machines, the 156 multipliers accelerate FFT/DFT signal processing, and the 423 user I/Os accommodate multiple high-speed ADC/DAC interfaces. The SRAM-based configuration lets designers ship field-upgradeable firmware, and the industrial temperature grade supports lab and factory-floor deployment without derating.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für 10CL080YF780I7G – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | 10CL080YF780C8G | 10CL080YF780C6G |
|---|---|---|---|
| Brand | Altera | Altera | Altera |
| Package | 780-FBGA (F780) | 780-FBGA (F780) - same | 780-FBGA (F780) - same |
| Logic Elements | 81,264 | 81,264 | 81,264 |
| Embedded Memory Bits | 2,810,880 | 2,810,880 | 2,810,880 |
| 18x18 Multipliers | 156 | 156 | 156 |
| Maximum User I/O | 423 | 423 | 423 |
| Speed Grade | I7 (industrial) | C8 (commercial, ~10% slower) | C6 (commercial, ~20% slower) |
| Operating Temperature | -40C to +100C (industrial) | 0C to +85C (commercial) | 0C to +85C (commercial) |
Wichtigste Unterscheidungsmerkmale
- Industrial speed grade I7 with -40C to +100C operating range (vs. 10CL080YF780C8G)
- Highest-density Cyclone 10 LP OPN with 81,264 LEs in 780-BGA (vs. 10CL080YF780C6G)
- 423 user I/Os in F780 package (vs. 10CL016YF484C8G)
Designhinweise
The 10CL080YF780I7G in a 780-FBGA package dissipates several watts under typical utilization, so plan PCB thermal relief from the start. Use a 4-layer stack-up with a dedicated internal ground plane directly beneath the BGA and stitch the inner plane to the top-layer ground pour with at least 9 thermal vias in a 3x3 array under the package. The exposed-pad-style center balls of the F780 must be soldered to a continuous ground copper island to provide a low-impedance thermal path; missing this connection can raise junction temperature 10-15C and reduce long-term reliability.
Route all 780-FBGA signals on inner microstrip layers with matched length tuning for LVDS and DDR interfaces; the F780 ball pitch is 1.0 mm, so 4-mil trace/space with 8-mil vias in dog-bone fanout is the practical minimum at most board houses. Decouple every VCC/VCCIO/VCCA_PLL pin individually with a 0.1 uF X7R 0402 ceramic placed within 100 mil of the ball, and add four bulk 47 uF tantalum or polymer capacitors around the package perimeter. Provide a JTAG header (TCK/TMS/TDI/TDO plus 10k pull-up on TCK and pull-down on TMS) on every board revision for prototype bring-up.
Three pitfalls recur on first-time Cyclone 10 LP designs: (1) leaving the CONFIG_DONE pin unmonitored causes boot failures to go undetected - add an LED to CONFIG_DONE and to nSTATUS; (2) forgetting to power-cycle the FPGA after re-programming via JTAG can leave the previous bitstream partially active - always issue a full configuration sequence; (3) selecting the wrong speed grade in Quartus Prime (C6 vs C8 vs I7) produces a passing compilation but fails timing closure at the rated Fmax - verify the device OPN matches the device selected in the Quartus Assignment menu before tape-out.
Compliance-Informationen
RoHS and REACH compliant per Intel Cyclone 10 LP family environmental documentation. Lead-free (Pb-free) FBGA finish; halogen-free per Intel product specifications. Not AEC-Q100 qualified - AEC-Q100 qualification is not standard for the Cyclone 10 LP industrial grade; if automotive functional safety is required, evaluate Intel's Cyclone V or Cyclone IV automotive-grade FPGAs instead.