10M16DCF484C8G - MAX 10 FPGA 16K LE 484-BGA | Intel
Teilenummer: 10M16DCF484C8G ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $50.06 | $50,06 |
| 10 | $47.55 | $475,50 |
| 100 | $43.2 | $4.320,00 |
| 500 | $39.5 | $19.750,00 |
| 1.000 | $35.8 | $35.800,00 |
10M16DCF484C8G Übersicht
An FPGA (Field Programmable Gate Array) is a semiconductor device containing an array of configurable logic blocks (CLBs), programmable interconnect, and embedded memory and DSP resources that can be re-programmed after manufacturing to implement custom digital logic. FPGAs occupy a tier in the programmable logic hierarchy between fixed-function ASICs (high NRE, long lead time, lowest unit cost) and CPLDs (smaller, non-volatile, simpler architecture). Within programmable logic taxonomy, MAX 10 sits at the entry-level/low-density node above small CPLDs and below Cyclone V, Arria, and Stratix families.
Key features of the 10M16DCF484C8G include 16 K logic elements, 504 Kbit user flash memory (embedded flash for user data), 45 embedded 18x18 multipliers, 4 PLLs, 2.5 Gb/s LVDS transceivers via LVDS I/O, and an integrated 12-bit ADC. The 'C' speed grade and '8' operating-temperature grade correspond to a commercial 0 C to 85 C junction range. The '484' package code designates the 484-ball FBGA footprint; this is the largest MAX 10 package and the only one exposing the full 320 user I/O count of the 10M16 device.
Architecturally, MAX 10 implements a logic-element fabric of 4-input LUTs, with M9K memory blocks providing the 562 Kbit total RAM and 18x18 multiplier blocks supporting DSP inference. The 55 nm embedded-flash process enables single-chip instant-on, and the integrated ADC supports analog monitoring of up to 16 external channels without an external mixed-signal IC.
Typical applications include industrial motor control, factory automation I/O expansion, video bridging and display controllers, low-cost portable instrumentation, sensor aggregation, and as a glue-logic replacement for CPLDs when higher logic density and DSP are required. The 484-BGA footprint suits designs that need the maximum I/O count plus LVDS signaling for camera, display, or high-speed parallel interfaces.
When selecting MAX 10, note that the 484-BGA package is the largest in the family and requires at least a 6-layer PCB with microvia fan-out for the 1.0 mm ball pitch. For space-constrained designs under 100 I/O, consider 10M16 in the 256-BGA or 144-pin EQFP packages; for higher density, move to Cyclone V E or Arria II GX families. The non-volatile instant-on architecture makes 10M16 particularly attractive when the application must start executing within milliseconds of power-up without an external boot flash.
This page synthesizes distributor pricing, same-brand MAX 10 pin-compatible OPNs (10M16DCF484C7G, 10M16DCF484A7G, 10M16DCF484I7G, 10M16DAF484C7G), and practical design notes that are not consolidated on the manufacturer product page.
Drop-in-Alternativen für 10M16DCF484C8G – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit 10M16DCF484C8G (gleiche Bauform und Footprint) – abweichend in Package, Temperature Grade, Process Technology, Configuration, Logic Elements.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
10M16DCF484C7G
✅ Drop-In✓ Auf Lager
$31.8 / Stück
Datenblatt ansehen →10M16DCF484A7G
✅ Drop-In✓ Auf Lager
$51 / Stück
Datenblatt ansehen →10M16DAF484C7G
✅ Drop-In✓ Auf Lager
$55.5 / Stück
Datenblatt ansehen →10M16DCF484I7G
✅ Drop-In✓ Auf Lager
$43.95 / Stück
Datenblatt ansehen →10M16DAF484I7G
✅ Drop-In✓ Auf Lager
$60.4 / Stück
Datenblatt ansehen →10M16DAF484I7P
✅ Drop-In✓ Auf Lager
$53.05 / Stück
Datenblatt ansehen →10M16DCF484C8G Grenzwerte & elektrische Eigenschaften
| Series | MAX 10 |
| Family | MAX 10 |
| Logic Elements | 16000 |
| Embedded Memory (Bits) | 562176 |
| User Flash Memory (Bits) | 516096 |
| Maximum User I/O | 320 |
| DSP Blocks (18x18 Multipliers) | 45 |
| PLLs | 4 |
| Process Technology | 55 nm |
| Supply Voltage (Core) | 1.2 V |
| Gehäuse | 484-FBGA |
| Ball Pitch | 1.0 mm |
| Montageart | Surface Mount |
| Speed Grade | C8 (commercial, 8 speed grade) |
| Temperature Grade | Commercial (0 C to 85 C) |
| Integrated ADC | Yes, 12-bit SAR |
| Non-volatile Configuration | Yes (dual on-chip flash) |
| RoHS-Status | Compliant |
10M16DCF484C8G 484-fbga Pinbelegungsleitfaden
Pinbelegung für 10M16DCF484C8G (484-fbga-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für 10M16DCF484C8G.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
10M16DCF484C8G ist geeignet für 6 Anwendungs: Industrial Motor Control, Factory Automation I/O Expansion, Video Bridging and Display Controllers, Portable Test and Measurement, Sensor Aggregation Hubs, CPLD Replacement / Glue Logic Aggregation.
Industrial Motor Control
The 10M16DCF484C8G fits industrial motor-control applications because it integrates a 12-bit ADC (for current/voltage sensing), 45 embedded 18x18 multipliers (for Park/Clarke transforms and SVPWM), and 320 user I/O (for multi-axis encoder and resolver feedback). With 16K logic elements it can implement a complete field-oriented control loop for a 3-axis stepper or servo system. Designers typically run the FPGA at 100-150 MHz system clock with a 100 MHz external oscillator; the four on-chip PLLs provide clock-domain flexibility for PWM generation and feedback sampling. The MAX 10 instant-on feature lets the controller begin commutating within milliseconds of power-up, which is critical for safety-rated drives that must reach a safe-torque-off state immediately.
Empfohlen
Factory Automation I/O Expansion
In factory automation, the 10M16DCF484C8G is used as a programmable I/O concentrator or protocol bridge between field devices (sensors, actuators) and a central PLC. The 320 user I/O can handle dozens of 24 V digital inputs and outputs through external level shifters; the integrated ADC reads analog sensor channels without a dedicated ADC IC. The non-volatile configuration ensures the device boots into the correct personality image immediately, eliminating field-reprogramming concerns after power cycles. Compared with a discrete CPLD design, the FPGA delivers 10-50x more logic capacity at similar cost, while the embedded user flash (516 Kbit) can store calibration data and serial numbers per node. Reference designs from Altera/Intel show typical PROFINET or EtherCAT slave implementations at 50-100 MHz system clock.
Empfohlen
Video Bridging and Display Controllers
The 10M16DCF484C8G handles video bridging and display-controller tasks by leveraging its LVDS I/O capability (up to 2.5 Gb/s per pair) and sufficient logic to implement timing controllers, color-space converters, and limited scalers. The 484-FBGA package provides enough I/O for parallel RGB, LVDS, or MIPI-DSI interfaces via bridge. Typical use cases include converting DSI to LVDS for industrial displays, generating timing for legacy VGA panels, or fusing multiple camera streams. The 16K logic elements and 45 DSP blocks allow basic chroma resampling and deinterlacing on-the-fly at 1080p60. The four PLLs derive independent pixel clocks from a single reference, simplifying multi-display designs. Power consumption stays below 1.5 W at full throughput thanks to the 55 nm process.
Empfohlen
Portable Test and Measurement
For portable test-and-measurement instruments such as handheld oscilloscope probes, logic analyzers, or bench multimeters, the 10M16DCF484C8G provides instant-on boot, integrated ADC, and compact BGA packaging in a small footprint. The non-volatile configuration eliminates the boot-PROM cost and PCB area, while the on-chip user flash stores calibration constants and instrument firmware metadata. With 16K LE the FPGA can implement USB protocol, custom trigger logic, and small DSP pre-processing. Typical designs run the FPGA at 50-100 MHz with the on-chip PLL generating multiple clock domains for ADC sampling and USB 2.0 HS. Battery operation is supported through MAX 10's low-power sleep modes, which retain configuration while drawing microamps - ideal for handheld instruments that must wake instantly on button press.
Empfohlen
Sensor Aggregation Hubs
In IoT edge nodes and sensor aggregation hubs, the 10M16DCF484C8G aggregates data from multiple SPI, I2C, UART, and GPIO-based sensors, performs local preprocessing or filtering, and forwards aggregated data over a high-speed uplink. The 320 user I/O comfortably handle 8-12 SPI slaves or 16+ I2C devices simultaneously; the 45 DSP blocks run basic FIR/IIR filters on accelerometer or microphone streams before forwarding. The embedded ADC samples analog channels (temperature, battery voltage) without a separate IC. The MAX 10 family supports low-power sleep modes that retain state while consuming milliwatts, suitable for battery-powered sensor nodes that wake periodically to transmit.
Empfohlen
CPLD Replacement / Glue Logic Aggregation
Designers replacing aging CPLD-based glue logic with a more capable FPGA use the 10M16DCF484C8G to consolidate multiple legacy CPLDs into one device. The 16K logic elements absorb wide bus bridges, multi-voltage level shifters, custom reset sequencers, and interrupt controllers that previously required 2-3 separate CPLDs. The integrated ADC adds monitoring of supply rails that CPLDs cannot perform, and the embedded flash stores boot personality for instant-on reset behavior. The 484-BGA package supports the high pin count typical of board-level glue logic (often 100-300 signals). Compared with a multi-CPLD solution, the FPGA reduces PCB area, BOM cost, and power consumption while adding firmware reconfigurability that CPLDs cannot match.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für 10M16DCF484C8G – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | 10M16DCF484C7G | 10M16DCF484A7G | 10M16DAF484C7G | 10M16DCF484I7G | 10M16DAF484I7G | 10M16DAF484I7P |
|---|---|---|---|---|---|---|---|
| Package | 484-FBGA | 484-FBGA - same | 484-FBGA - same | 484-FBGA - same | 484-FBGA - same | 484-FBGA - same | 484-FBGA - same |
| Brand | Intel | Intel | Intel | Intel | Intel | Intel | Intel |
| Speed Grade | C8 | C7 | A7 | C7 | I7 | I7 | I7 |
| Temperature Grade | Commercial (0C to 85C) | Commercial | Commercial | Commercial | Industrial (-40C to 100C) | Industrial | Industrial |
| User I/O | 320 | 320 | 320 | 320 | 320 | 320 | 320 |
| Integrated ADC | Yes (12-bit) | Yes (12-bit) | Yes (12-bit) | Yes (12-bit) | Yes (12-bit) | Yes (12-bit) | Yes (12-bit) |
| Non-volatile Configuration | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Wichtigste Unterscheidungsmerkmale
- Integrated 12-bit ADC not present in Cyclone IV/V E families (vs. 10CL025YU256C8G (Cyclone IV E equivalent density))
- Non-volatile instant-on configuration without external boot PROM (vs. 10CL025YU256C8G (SRAM-based Cyclone IV E))
- Higher user I/O count in the same package (vs. 10M08DCF484C8G (10M08 density, same 484-FBGA))
Designhinweise
The 484-FBGA package uses a 1.0 mm ball pitch, which requires PCB fabrication with microvia (laser-drilled) stack-up for fan-out. Use at least a 6-layer PCB with 1 oz copper on outer layers and dedicated inner power/ground planes. Per Intel MAX 10 hardware design guidelines, place 0.1 uF decoupling capacitors on every VCCIO and VCCINT ball pair, with bulk 10-47 uF tantalum or polymer capacitors at each voltage regulator output. Maintain a continuous ground plane under the BGA to provide return-path stitching for high-speed LVDS pairs.
The 484-FBGA package has a theta-JA of approximately 12-15 C/W with the recommended 6-layer PCB layout (estimated: based on typical JEDEC EIA/JESD51 measurement, 484-ball FBGA, 1.0 mm pitch, 6-layer 2s2p board). At maximum toggling activity the FPGA can dissipate 1.5-2.5 W, resulting in a 18-38 C junction temperature rise above ambient. For closed-enclosure industrial designs at 70 C ambient, ensure the FPGA stays below its 85 C commercial junction limit; if not, derate to industrial-grade OPNs such as 10M16DCF484I7G.
Do not confuse the 'DA' feature variant (10M16DAF484) with the 'DC' device (10M16DCF484) - the 'DA' OPNs may have a different mix of logic, memory, and DSP resources, even though they share the same package. Always cross-check the Intel MAX 10 device overview to confirm that the alternative OPN provides the IP blocks and memory depth your design requires. Also note that MAX 10 configuration flash uses dual-image mode by default - if your design relies on fail-safe remote update, configure the image-selection scheme correctly in the Quartus Prime Programming File generator.
Compliance-Informationen
RoHS compliant per Altera/Intel product page (lead-free 'G' suffix in OPN confirms Pb-free ball finish). Not AEC-Q100 qualified; MAX 10 is intended for industrial/commercial use, not automotive. For automotive applications, use a separately-qualified Cyclone IV/V automotive-grade part.