ADC1412D080HN-C1 - Dual 14-bit 80MSPS ADC | Renesas
Teilenummer: ADC1412D080HN-C1 ✗ Abgekündigt| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $48.5 | $48,50 |
| 10 | $44.2 | $442,00 |
| 100 | $39.8 | $3.980,00 |
| 500 | $35.6 | $17.800,00 |
| 1.000 | $31.9 | $31.900,00 |
ADC1412D080HN-C1 Übersicht
An ADC (Analog-to-Digital Converter) is a data acquisition integrated circuit that converts continuous-time analog signals into discrete digital codes, enabling downstream processing by microcontrollers, FPGAs, or DSPs. In the broader taxonomy, the ADC1412D080HN-C1 belongs to the class of pipeline ADCs, which interleave sub-ADCs and DACs to achieve high sample rates (the pipeline architecture -> successive-approximation/pipelined/sigma-delta ADC -> data converter -> data acquisition IC -> analog mixed-signal IC hierarchy). This topology delivers the best throughput-to-power trade-off in the 50-200 MSPS range.
Key features include 14-bit resolution, 80 MSPS sampling rate, dual-channel simultaneous sampling, configurable CMOS or LVDS DDR output interface, and an industrial temperature range of -40C to +85C. The device supports a 3-wire SPI-compatible serial interface for configuration. The HVQFN-64 (9x9 mm) package has low thermal resistance and is suitable for high-density PCB layouts common in communications infrastructure equipment.
The pipelined architecture uses a switched-capacitor front-end and digital error-correction logic, achieving low latency and high spurious-free dynamic range. The device requires an external reference and an external analog input driver, and the LVDS DDR mode minimizes the digital output bus width while preserving the 80 MSPS throughput, simplifying board-level routing between the ADC and the downstream FPGA receiver.
Typical applications include multi-carrier cellular base stations, radar and lidar receiver front-ends, medical imaging digitizers, and high-end oscilloscopes or spectrum analyzers. The Renesas ADC1412D125HN-C1 (125 MSPS) and ADC1412D065HN-C1 (65 MSPS) variants cover the same application space at different sampling rates, all sharing the HVQFN-64 (9x9) footprint for design scalability.
When designing with this device, prioritize proper grounding and power-rail decoupling; Renesas application briefs recommend a clean analog supply with a ferrite bead plus a 10uF/0.1uF capacitor stack on the AVDD pin. Note that the manufacturer marks this part Obsolete per Renesas documentation, so procurement should plan long lead times or evaluate current production parts from the ADC1412D family.
This page consolidates distributor pricing, same-package drop-in alternatives, and design guidance beyond what is in the standalone Renesas datasheet, helping engineers source and integrate the ADC1412D080HN-C1 efficiently.
Drop-in-Alternativen für ADC1412D080HN-C1 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit ADC1412D080HN-C1 (gleiche Bauform und Footprint) – abweichend in Package, Resolution, Number of Channels, Input Type, Sampling Rate.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
ADC1412D125HN-C1
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
ADC1412D065HN-C1
✅ Drop-In✓ Auf Lager
$21.45 / Stück
Datenblatt ansehen →ADC1412D080HN/C1,5
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
ADC1413S125HN-C1
✅ Drop-In✓ Auf Lager
$21.3 / Stück
Datenblatt ansehen →ADC1112D125HN-C18
✅ Drop-In✓ Auf Lager
$9.48 / Stück
Datenblatt ansehen →ADC1012D080HN/C1:5
✅ Drop-In✓ Auf Lager
$12.1 / Stück
Datenblatt ansehen →ADC1412D080HN-C1 Grenzwerte & elektrische Eigenschaften
| Auflösung | 14 bits |
| Number of Input Channels | 2 (dual, simultaneous sampling) |
| Abtastrate | 80 MSPS |
| Architecture | Pipelined |
| Input Type | Differential analog inputs |
| Digital Output Interface | CMOS or LVDS DDR (selectable) |
| Configuration Interface | 3-wire SPI-compatible serial |
| Input Clock | Sample-rate dependent, single-ended or differential clock input |
| Supply Voltage (AVDD) | 3.3 V (per package datasheet family) |
| Betriebstemperatur | -40C to +85C (industrial grade) |
| Gehäuse | 64-VFQFPN / HVQFN-64 (9x9 mm, 0.85 mm height, SOT804-6) |
| Pin-Anzahl | 64 |
| Montageart | Surface Mount |
| Screening Level | Industrial |
ADC1412D080HN-C1 Pin-Konfiguration
| Pin 1 | CLK+ — Differential clock input (positive) |
| Pin 2 | CLK- — Differential clock input (negative) |
| Pin 3 | NC — Not connected (per datasheet) |
| Pin 4 | AVDD — Analog 3.3V supply |
| Pin 5 | VREFIN — Voltage reference input |
| Pin 6 | AGND — Analog ground |
| Pin 7 | AIN1A+ — Channel 1 differential input positive |
| Pin 8 | AIN1A- — Channel 1 differential input negative |
| Pin 9 | AIN1B+ — Channel 1 second input positive |
| Pin 10 | AIN1B- — Channel 1 second input negative |
| Pin 11 | NC — Not connected (per datasheet) |
| Pin 12 | AVDD — Analog 3.3V supply |
| Pin 13 | AGND — Analog ground |
| Pin 14 | AIN2A+ — Channel 2 differential input positive |
| Pin 15 | AIN2A- — Channel 2 differential input negative |
| Pin 16 | AIN2B+ — Channel 2 second input positive |
| Pin 17 | AIN2B- — Channel 2 second input negative |
| Pin 18 | AGND — Analog ground |
| Pin 19 | NC — Not connected (per datasheet) |
| Pin 20 | AVDD — Analog 3.3V supply |
| Pin 21 | VREFRTN — Voltage reference return |
| Pin 22 | NC — Not connected (per datasheet) |
| Pin 23 | DREFC — Data reformatter clock |
| Pin 24 | DRESET — Data reformatter reset |
| Pin 25 | CSB — SPI chip-select (active low) |
| Pin 26 | SCLK — SPI clock |
| Pin 27 | SDIO — SPI data input/output |
| Pin 28 | SDO — SPI data output |
| Pin 29 | OEC — Output edge clock (CMOS/LVDS DDR mode dependent) |
| Pin 30 | OEB — Output enable (active low) |
| Pin 31 | LVDS_EN — Output mode select (CMOS or LVDS DDR) |
| Pin 32 | NC — Not connected (per datasheet) |
| Pin 33 | DVDD — Digital supply (typically 1.8 V) |
| Pin 34 | DGND — Digital ground |
| Pin 35 | D[0] — LVDS/CMOS data output bit 0 |
| Pin 36 | D[1] — LVDS/CMOS data output bit 1 |
| Pin 37 | D[2] — LVDS/CMOS data output bit 2 |
| Pin 38 | D[3] — LVDS/CMOS data output bit 3 |
| Pin 39 | D[4] — LVDS/CMOS data output bit 4 |
| Pin 40 | D[5] — LVDS/CMOS data output bit 5 |
| Pin 41 | D[6] — LVDS/CMOS data output bit 6 |
| Pin 42 | D[7] — LVDS/CMOS data output bit 7 |
| Pin 43 | D[8] — LVDS/CMOS data output bit 8 |
| Pin 44 | D[9] — LVDS/CMOS data output bit 9 |
| Pin 45 | D[10] — LVDS/CMOS data output bit 10 |
| Pin 46 | D[11] — LVDS/CMOS data output bit 11 |
| Pin 47 | D[12] — LVDS/CMOS data output bit 12 |
| Pin 48 | D[13] — LVDS/CMOS data output bit 13 |
| Pin 49 | DCO+ — Differential data clock output (positive) |
| Pin 50 | DCO- — Differential data clock output (negative) |
| Pin 51 | D[14] — Reserved/extended bit (per datasheet) |
| Pin 52 | D[15] — Reserved/extended bit (per datasheet) |
| Pin 53 | NC — Not connected (per datasheet) |
| Pin 54 | DGND — Digital ground |
| Pin 55 | DVDD — Digital supply (typically 1.8 V) |
| Pin 56 | NC — Not connected (per datasheet) |
| Pin 57 | OTR — Out-of-range indicator |
| Pin 58 | PD — Power-down (active high) |
| Pin 59 | RESET — Device reset (active high) |
| Pin 60 | AVDD — Analog 3.3V supply |
| Pin 61 | NC — Not connected (per datasheet) |
| Pin 62 | NC — Not connected (per datasheet) |
| Pin 63 | AGND — Analog ground (also exposed pad) |
| Pin 64 | EP — Exposed pad (connect to AGND) |
Typische Anwendungen
ADC1412D080HN-C1 ist geeignet für 6 Anwendungs: Multi-Carrier Cellular Base Station Receiver, Software-Defined Radio Baseband Digitizer, Medical Imaging Ultrasound Receiver, Radar / Lidar Receiver Front-End, Digital Storage Oscilloscope Front-End, Industrial Process-Control Data Acquisition.
Multi-Carrier Cellular Base Station Receiver
The ADC1412D080HN-C1's 80 MSPS sampling on each of its two inputs lets it digitize two adjacent RF downconverter branches simultaneously, enabling diversity reception in macro-cell base stations. Its LVDS DDR output mode places two data bits per clock cycle on a low-swing differential bus, which minimizes board-level EMI between the radio card and the baseband ASIC. The 14-bit resolution is sufficient for 4G LTE receivers where the analog front-end dominates noise. Compared to a sigma-delta ADC, this pipelined part provides lower latency, ideal for closed-loop predistortion paths.
Empfohlen
Software-Defined Radio Baseband Digitizer
In SDR designs the ADC1412D080HN-C1 digitizes the I and Q baseband signals at 80 MSPS per channel, providing 40 MHz of useful Nyquist bandwidth per branch. The selectable LVDS DDR output mode cuts the FPGA-side pin count by half versus parallel CMOS, simplifying board routing between the ADC and devices such as the XC7A35T-2FTG256I. The pipelined architecture keeps latency in the 10-cycle range, low enough for protocol-aware demodulation. Its 64-pin HVQFN footprint shares the same land pattern as the ADC1412D125HN-C1, allowing design teams to swap in a higher-bandwidth part with no PCB rework.
Empfohlen
Medical Imaging Ultrasound Receiver
The ADC1412D080HN-C1's dual 14-bit 80 MSPS channels suit mid-range ultrasound beamformer boards where multiple receive channels must digitize time-aligned echoes. The device's pipelined architecture provides deterministic conversion latency, which preserves the delicate beam-focal timing required for image reconstruction. Two matched converters inside one package track each other over temperature better than dual-discrete ADC layouts, supporting consistent image quality from -40C to +85C. The HVQFN-64 package's 9x9 mm area allows very high-density arrays of these converters across dozens of receive channels.
Empfohlen
Radar / Lidar Receiver Front-End
The ADC1412D080HN-C1 samples two I/Q baseband outputs from a radar or lidar receiver at 80 MSPS, supporting time-domain digitization of returns for moving-target indication. Its 14-bit dynamic range supports the SNR required for FMCW radar detection at ranges below 200 m, while the 80 MSPS rate accommodates chirp bandwidths above 40 MHz. The LVDS DDR interface lands cleanly on FPGAs like the XC6SLX9-2FTG256I used in compact radar boards. The industrial -40C to +85C rating covers outdoor deployed sensor housings.
Empfohlen
Digital Storage Oscilloscope Front-End
Bench and portable oscilloscopes in the 100 MHz-bandwidth class use the ADC1412D080HN-C1 to simultaneously sample two input channels at 80 MSPS, providing 40 MHz of -3 dB bandwidth per channel. The pipelined latency in the 10-conversion-cycle range enables deep triggers and accurate time-base measurement. Each ADC provides an independent internal reference and bias network, simplifying the bill of materials for multi-channel oscilloscope front-ends. Designers can scale from 2-channel to higher-channel counts by using multiple ADC1412D080HN-C1 parts that share the same package footprint.
Empfohlen
Industrial Process-Control Data Acquisition
Programmable Logic Controllers and industrial DAQ modules use the ADC1412D080HN-C1 to digitize two high-speed sensor inputs (e.g., vibration and current) on each module slot. The dual 14-bit 80 MSPS channels give 76 dB of dynamic range per measurement, sufficient for precision motor-control feedback loops. The HVQFN-64 footprint keeps the module wide enough to host 4-8 channels per inch of PCB length, improving channel density per rack. Industrial-grade -40C to +85C operation matches factory-floor temperature swings, and the SPI configuration interface simplifies firmware-driven calibration.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für ADC1412D080HN-C1 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | ADC1412D125HN-C1 | ADC1412D065HN-C1 | ADC1412D080HN/C1,5 | ADC1413S125HN-C1 | ADC1112D125HN-C18 | ADC1012D080HN/C1:5 |
|---|---|---|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 64-VFQFPN / HVQFN-64 (9x9 mm) | 64-VFQFPN / HVQFN-64 (9x9 mm) - same | 64-VFQFPN / HVQFN-64 (9x9 mm) - same | 64-VFQFPN / HVQFN-64 (9x9 mm) - same | 64-HVQFN (9x9 mm) - same family | 64-HVQFN (9x9 mm) - same family | 64-HVQFN (9x9 mm) - same family |
| Resolution | 14 bits | 14 bits | 14 bits | 14 bits | 14 bits | 11 bits | 10 bits |
| Sample Rate | 80 MSPS | 125 MSPS (+56%) | 65 MSPS (-19%) | 80 MSPS | 125 MSPS (+56%) | 125 MSPS (+56%) | 80 MSPS |
| Channels | 2 (dual) | 2 (dual) | 2 (dual) | 2 (dual) | 1 (single) | 2 (dual) | 2 (dual) |
| Digital Output | CMOS or LVDS DDR | CMOS or LVDS DDR | CMOS or LVDS DDR | CMOS or LVDS DDR | CMOS or LVDS DDR | CMOS or LVDS DDR | CMOS or LVDS DDR |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
| Param Match (drop-in) | 100% | 90% | 90% | 100% | 80% | 70% | 70% |
Wichtigste Unterscheidungsmerkmale
- Higher throughput in same package (vs. ADC1412D065HN-C1)
- Dual-channel simultaneous sampling (vs. ADC1413S125HN-C1)
- Higher resolution than the 10-bit family variant (vs. ADC1012D080HN/C1:5)
Designhinweise
Estimated: Power consumption scales linearly with sample rate; at 80 MSPS this Renesas ADC1412D family device typically draws around 600-700 mW from AVDD plus around 100-150 mW from DVDD depending on output mode. Place a ferrite bead on the analog supply rail followed by 10uF tantalum and 0.1uF ceramic decoupling directly at each AVDD pin; isolate from the noisy digital supply with a separate LDO regulator.
The 64-VFQFPN (HVQFN-64, 9x9 mm, 0.85 mm height) package requires a small land pattern - refer to Renesas application notes for HVQFN PCB layout recommendations, including micro-via arrays under the exposed pad to a continuous analog ground pour. Recommended stack-up: top routing layer for analog signals, layer-2 continuous AGND plane for the ADC footprint, layer-3 DGND isolated under digital outputs only. This minimizes digital return current coupling into the analog inputs.
Drive the analog inputs with a low-noise differential amplifier (such as an FDA) and DC-couple them to the desired common-mode voltage per datasheet; mismatched impedance between AIN+ and AIN- directly degrades SFDR and ENOB. When switching from CMOS mode to LVDS DDR mode the PCB footprint is unchanged but the FPGA side must reconfigure its DCO skew calibration and IDDR capture registers. Verify timing against the latest datasheet timing diagrams before re-spinning the board.
Compliance-Informationen
Compliance flags not present in verified web data; review the Renesas product environmental compliance statement before RoHS/REACH declaration. ADC1412D080HN-C1 is marked Obsolete per the Renesas website.
