EP20K600CB652C7E5 - APEX 20KC 600K Gates FPGA 652-BGA | Intel
Teilenummer: EP20K600CB652C7E5 ✗ Abgekündigt| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $285 | $285,00 |
| 10 | $252 | $2.520,00 |
| 100 | $225 | $22.500,00 |
| 500 | $198 | $99.000,00 |
| 1.000 | $175 | $175.000,00 |
EP20K600CB652C7E5 Übersicht
An FPGA (Field Programmable Gate Array) is a semiconductor device built around an array of configurable logic blocks (CLBs / LEs), embedded memory, and programmable interconnect that can be re-programmed in-system to implement any digital logic function. In the broader taxonomy: FPGA -> programmable logic device (PLD) -> digital IC -> semiconductor. FPGAs sit between fixed-function ASICs (lower NRE, higher per-unit cost at volume) and CPLDs (smaller, faster, non-volatile), giving designers high logic density and parallel processing without the long lead time of custom silicon.
Key features include 488 maximum user I/O pins, 311,296 bits of embedded SRAM distributed across EAB (Embedded Array Block) memory, MultiCore interconnect with direct-drive and PIP registers, four phase-locked loops (PLLs) for clock synthesis, and LVTTL/LVCMOS/PCI/SSTL/HSTL I/O standards support. The 0.15 um CMOS process and 1.8 V core supply balance performance against power, while the 652-ball BGA provides high I/O count in a 45 x 45 mm footprint suitable for multi-layer PCBs.
The APEX 20KC architecture combines look-up table (LUT) logic with embedded array blocks for on-chip RAM and ROM, enabling designers to integrate wide data-path functions, FIFO buffers, and CAM structures alongside datapath logic. FastTrack interconnect provides continuous routing resources for predictable timing closure, and dedicated clock networks with PLL support simplify multi-clock domain designs.
Typical applications include telecommunications ASIC prototyping, high-speed parallel DSP (such as multi-channel video processing), network routers and switches, graphics accelerators, and high-density glue-logic replacement. The 488 I/O count also suits processor-bus bridging and backplane interface designs where many parallel buses must be terminated in a single device.
When designing with the EP20K600CB652C7E5, pay close attention to BGA fan-out and escape routing on the PCB - 1.0 mm or finer pitch BGA requires microvia or via-in-pad technology. Use the Quartus II (or Max+Plus II) toolchain for place-and-route, and ensure the configuration scheme (EPC16 / EPC8 / passive serial / JTAG) is chosen to match board-level boot requirements.
This page synthesizes distributor pricing, lifecycle context, drop-in package-compatible alternatives from the same APEX 20K family, and practical design notes not found in the manufacturer datasheet.
Drop-in-Alternativen für EP20K600CB652C7E5 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit EP20K600CB652C7E5 (gleiche Bauform und Footprint) – abweichend in Package, Process Technology, Operating Temperature, Speed Grade, Propagation Delay.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
EP20K600CB652C7
✅ Drop-In✓ Auf Lager
$1320 / Stück
Datenblatt ansehen →EP20K600CB652-8
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
EP20K400CB652C7ES
✅ Drop-In✓ Auf Lager
$215 / Stück
Datenblatt ansehen →EP20K400CB652I7
✅ Drop-In✓ Auf Lager
$149.5 / Stück
Datenblatt ansehen →EP20K400CB652C9
✅ Drop-In✓ Auf Lager
$89.2 / Stück
Datenblatt ansehen →EP20K600CB652C7E5 Grenzwerte & elektrische Eigenschaften
| Family | APEX 20KC |
| Typical Gate Count | 600K gates |
| Logic Elements / Macros | 24,320 |
| Maximum User I/O | 488 |
| Embedded Memory (EAB bits) | 311,296 bits |
| Gehäuse | 652-ball FineLine BGA |
| Core Voltage | 1.8 V |
| Process Technology | 0.15 um CMOS |
| Betriebstemperatur | 0C to +85C (commercial, suffix C7) |
| Speed Grade | 7 (-1 speed bin equivalent, E5 suffix) |
| PLL Count | 4 |
| Supported I/O Standards | LVTTL, LVCMOS, PCI, SSTL, HSTL |
| Configuration Scheme | Passive Serial / JTAG / EPC16 / EPC8 |
| Lebenszyklusstatus | Obsolete - last time buy has passed |
EP20K600CB652C7E5 Pin-Konfiguration
| Pin A1 | I/O — User I/O pin (bank 1) |
| Pin A2 | I/O — User I/O pin (bank 1) |
| Pin A3 | I/O — User I/O pin (bank 1) |
| Pin A4 | VCCIO — I/O supply voltage |
| Pin A5 | I/O — User I/O pin (bank 1) |
| Pin A6 | I/O — User I/O pin (bank 1) |
| Pin A7 | I/O — User I/O pin (bank 1) |
| Pin A8 | GND — Ground |
| Pin A9 | I/O — User I/O pin (bank 1) |
| Pin A10 | I/O — User I/O pin (bank 1) |
| Pin A11 | I/O — User I/O pin (bank 1) |
| Pin A12 | I/O — User I/O pin (bank 1) |
| Pin A13 | VCCIO — I/O supply voltage |
| Pin A14 | I/O — User I/O pin (bank 1) |
| Pin A15 | I/O — User I/O pin (bank 1) |
| Pin A16 | I/O — User I/O pin (bank 1) |
| Pin A17 | I/O — User I/O pin (bank 1) |
| Pin A18 | GND — Ground |
| Pin A19 | I/O — User I/O pin (bank 1) |
| Pin A20 | I/O — User I/O pin (bank 1) |
| Pin A21 | I/O — User I/O pin (bank 1) |
| Pin A22 | I/O — User I/O pin (bank 1) |
| Pin A23 | VCCIO — I/O supply voltage |
| Pin A24 | I/O — User I/O pin (bank 1) |
| Pin A25 | I/O — User I/O pin (bank 1) |
| Pin A26 | I/O — User I/O pin (bank 1) |
Typische Anwendungen
EP20K600CB652C7E5 ist geeignet für 6 Anwendungs: Telecommunications ASIC Prototyping, High-Speed Parallel DSP, Network Router and Switch Line Cards, Graphics and Image Processing Accelerators, High-Density Glue Logic Replacement, Industrial Control and Test Equipment.
Telecommunications ASIC Prototyping
The EP20K600CB652C7E5's 600K typical gates and 24,320 logic elements make it a strong ASIC prototype vehicle for telecom ASICs targeting OC-192, ATM, and SONET designs. Its 488 user I/O pins support the wide parallel buses common in line-card designs, while the 311,296 bits of embedded EAB memory enable on-chip packet buffering and CAM structures without external SRAM. The 4 PLLs allow multiple clock domains typical of telecom backplanes. Designers benefit from the APEX 20K MultiCore interconnect for predictable timing closure on critical paths.
Empfohlen
High-Speed Parallel DSP
The EP20K600CB652C7E5 is well suited to multi-channel DSP workloads such as video processing, image filtering, and baseband signal processing. With 24,320 logic elements designers can instantiate dozens of parallel multiply-accumulate engines; the 311,296 EAB bits provide distributed FIFO and coefficient memory for FIR/FFT pipelines. The 0.15 um process at 1.8 V core supports clock rates up to the APEX 20KC speed-grade-7 bin while keeping power manageable for dense logic blocks.
Empfohlen
Network Router and Switch Line Cards
The 488 user I/O count of the EP20K600CB652C7E5 supports the wide parallel backplane interfaces used in router and switch line cards. Combined with 311,296 bits of EAB SRAM for queue management and the 4 PLLs for clock-domain multiplexing between fabric, PHY, and CPU interfaces, the device can integrate forwarding lookup tables, QoS engines, and statistics counters on a single chip. The 652-FineLine BGA provides the mechanical robustness and signal-integrity margins needed for backplane insertion.
Empfohlen
Graphics and Image Processing Accelerators
The EP20K600CB652C7E5's combination of 24,320 logic elements and 311,296 EAB bits makes it suitable for graphics pipeline acceleration, including rasterization, texture addressing, and alpha-blending stages. The 488 I/O pins are sufficient to drive wide video data buses (24/32-bit RGB) plus side-band control signals. Embedded array blocks can store lookup tables (LUTs) for gamma correction and color-space conversion at line rate.
Empfohlen
High-Density Glue Logic Replacement
For designs that previously used multiple CPLDs or discrete glue-logic chips, the EP20K600CB652C7E5 offers 24,320 logic elements and 488 I/O pins in a single BGA, reducing board area and BOM count. Common use cases include processor-bus bridging, custom memory controller interfacing, and backplane signal multiplexing. The Quartus II toolchain simplifies design migration from legacy CPLD schematics.
Empfohlen
Industrial Control and Test Equipment
The commercial 0C to +85C operating range of the EP20K600CB652C7E5 (speed grade E5 / C7) suits industrial test and measurement equipment where wide operating temperature is not required. The 488 user I/O count supports multi-channel instrumentation front-ends, while the embedded EAB memory implements deep sample buffers and trigger pattern matchers. Designers can leverage the APEX 20K MultiCore interconnect to maintain deterministic timing on control loops.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für EP20K600CB652C7E5 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | EP20K600CB652C7 | EP20K600CB652-8 | EP20K400CB652C7 | EP20K400CB652I7 | EP20K400CB652C9 |
|---|---|---|---|---|---|---|
| Brand | Intel (formerly Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) |
| Package | 652-ball FineLine BGA | 652-ball FineLine BGA (same) | 652-ball FineLine BGA (same) | 652-ball FineLine BGA (same) | 652-ball FineLine BGA (same) | 652-ball FineLine BGA (same) |
| Typical Gate Count | 600K gates | 600K gates | 600K gates | 400K gates (-33%) | 400K gates (-33%) | 400K gates (-33%) |
| Logic Elements / Macros | 24,320 | 24,320 | 24,320 | 16,640 (-32%) | 16,640 (-32%) | 16,640 (-32%) |
| Maximum User I/O | 488 | 488 | 488 | 488 | 488 | 488 |
| Embedded Memory (EAB bits) | 311,296 bits | 311,296 bits | 311,296 bits | 212,992 bits (-32%) | 212,992 bits (-32%) | 212,992 bits (-32%) |
| Operating Temperature | 0C to +85C (Commercial, C7) | 0C to +85C (Commercial, C7) | 0C to +85C (Commercial, -8) | 0C to +85C (Commercial, C7) | -40C to +100C (Industrial, I7) | 0C to +85C (Commercial, C9) |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
Wichtigste Unterscheidungsmerkmale
- Highest gate density in the APEX 20K family (vs. EP20K400CB652C7)
- Same-package drop-in second source (vs. EP20K600CB652C7)
- Speed grade E5 bin flexibility vs -8 (vs. EP20K600CB652-8)
Designhinweise
The 652-ball FineLine BGA package uses 1.0 mm ball pitch. Per APEX 20K datasheet PCB design guidelines, use a minimum 4-layer PCB stack-up with dedicated ground and power planes. Microvia or via-in-pad technology is required for signal escape routing on inner balls. Maintain 50 ohm controlled impedance on high-speed I/O (LVTTL/PCI/SSTL) traces to preserve signal integrity.
Estimated: At full logic utilization and maximum toggle rate, the EP20K600CB652C7E5 can dissipate 3 to 5 W of power. The 652-BGA package thermal resistance is approximately 15 C/W theta-JA with standard JEDEC test board airflow. A thermal copper pad array under the BGA and adequate chassis airflow are required to keep junction temperature below the commercial 85C limit. Use multiple thermal vias beneath the die for heat extraction.
Configuration mode selection is critical: the EP20K600CB652C7E5 supports passive serial, JTAG, and EPC16/EPC8 configuration devices. Mixing MSEL pin strapping between modes causes boot failures. Per APEX 20K datasheet, verify the MSEL[2..0] pins are tied correctly for the chosen configuration device before PCB fab. Also note that Quartus II versions newer than 13.0 do NOT support APEX 20K - use legacy 13.0 SP1 or earlier.
Compliance-Informationen
RoHS/REACH compliance status not explicitly stated in the verified web data; Altera APEX 20K parts were lead-free per industry norm but not all variants are documented as RoHS compliant. AEC-Q100 not applicable (FPGA family predates automotive qualification push).
