FS35R12W1T4 - 1200V 35A EasyPACK 1B IGBT Module | Infineon
Teilenummer: FS35R12W1T4 ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $34.6 | $34,60 |
| 10 | $31.5 | $315,00 |
| 100 | $28.2 | $2.820,00 |
| 500 | $25.4 | $12.700,00 |
| 1.000 | $22.8 | $22.800,00 |
FS35R12W1T4 Übersicht
An IGBT module is a hybrid power semiconductor assembly that combines insulated-gate bipolar transistors with co-packaged freewheeling diodes in an isolated, baseplate-less housing. It belongs to the power module family within discrete semiconductors, sitting above discrete IGBTs and below integrated power stacks (IPMs) in the power-conversion hierarchy. Six-pack modules are the workhorse building block of three-phase variable-frequency drives, servo amplifiers, and solar string inverters.
Key features of the FS35R12W1T4 include a 1200 V collector-emmitter blocking voltage (VCE), 35 A nominal collector current per switch, TRENCHSTOP IGBT4 trench/field-stop technology for low VCE(sat) and soft switching, an integrated NTC for overtemperature protection, and an operating junction range from -40 C to +150 C. The EasyPACK 1B housing is baseplate-less and uses screw-mount power terminals, enabling compact liquid-cooled or forced-air designs.
The IGBT4 die is optimized for hard-switching topologies up to roughly 16 kHz, with low switching losses and a robust short-circuit ruggedness of 10 us. The integrated EC4 diodes use the latest emitter-controlled generation for reduced reverse-recovery losses, which directly improves inverter efficiency at higher switching frequencies.
Typical applications include three-phase motor drives for industrial pumps, fans, and servo amplifiers, as well as solar string inverters, UPS systems, and welding power supplies. The press-fit variant FS35R12W1T4_B11 shares the same electrical die and offers solder-free assembly for high-volume manufacturing.
When designing with this module, ensure the DC-link bus bar layout maintains loop inductance below 30 nH to keep voltage overshoot within the 1200 V rating. Always read the integrated NTC through an isolated amplifier and de-rate the module above 90 C case temperature per the datasheet thermal curves.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the manufacturer datasheet alone.
Drop-in-Alternativen für FS35R12W1T4 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit FS35R12W1T4 (gleiche Bauform und Footprint) – abweichend in Integrated NTC, Mounting Type, Topology.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
FS35R12W1T4_B11
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
FS35R12W1T7
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
FP35R12W2T4
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
FS35R12W1T4 Grenzwerte & elektrische Eigenschaften
| Manufacturer | Infineon Technologies |
| Topologie | Six-pack (3-phase inverter) |
| Collector-Emitter Voltage (VCE) | 1200 V |
| Nominal Collector Current (IC nom) | 35 A |
| DC Collector Current | 65 A (per Mouser listing, TC limited) |
| IGBT Technology | TRENCHSTOP IGBT4 (Trench/Field-stop) |
| Diode Technology | Emitter Controlled 4 (EC4) |
| Integrated NTC | Yes |
| Gehäuse | EasyPACK 1B (baseplate-less) |
| Montageart | Screw-mount power terminals, PressFIT-pin option (FS35R12W1T4_B11) |
| Betriebs-Sperrschichttemperatur | -40 C to +150 C |
| Configuration | 6 IGBTs + 6 freewheeling diodes |
| RoHS-Status | Compliant |
| Short-Circuit Withstand Time | 10 us (typical for IGBT4 class) |
| Datasheet Document Length | 9 pages (per AllDatasheet mirror) |
| Power Dissipation Range | 135 W - 275 W (EasyPACK 1B family) |
FS35R12W1T4 Pin-Konfiguration
| Pin 1 | G1 — Gate of IGBT 1 (high-side, phase U) |
| Pin 2 | E1 — Auxiliary emitter of IGBT 1 |
| Pin 3 | G2 — Gate of IGBT 2 (low-side, phase U) |
| Pin 4 | E2 — Auxiliary emitter of IGBT 2 |
| Pin 5 | G3 — Gate of IGBT 3 (high-side, phase V) |
| Pin 6 | E3 — Auxiliary emitter of IGBT 3 |
| Pin 7 | G4 — Gate of IGBT 4 (low-side, phase V) |
| Pin 8 | E4 — Auxiliary emitter of IGBT 4 |
| Pin 9 | G5 — Gate of IGBT 5 (high-side, phase W) |
| Pin 10 | E5 — Auxiliary emitter of IGBT 5 |
| Pin 11 | G6 — Gate of IGBT 6 (low-side, phase W) |
| Pin 12 | E6 — Auxiliary emitter of IGBT 6 |
IGBT Forward Bias Sicherer Arbeitsbereich (FBSOA)
Typische Anwendungen
FS35R12W1T4 ist geeignet für 6 Anwendungs: Industrial Motor Drive (VFD), Solar String Inverter, Servo Amplifier, Uninterruptible Power Supply (UPS), Welding Power Supply, Electric Vehicle Charging Station.
Industrial Motor Drive (VFD)
The FS35R12W1T4 fits three-phase variable-frequency drives for industrial pumps, fans, and compressors up to about 25 kW. Its 1200 V VCE rating covers 480 V AC and 690 V AC bus systems with standard 1.5x derating margin, while the 35 A nominal collector current supports continuous line currents around 25 A RMS at typical 8-16 kHz switching. Placed in a six-pack topology between the rectifier and motor, the module eliminates discrete IGBT paralleling and reduces PCB loop inductance.
Empfohlen
Solar String Inverter
For solar string inverters in the 10-20 kW residential and small-commercial range, the FS35R12W1T4 provides the high-voltage DC-AC conversion stage. Its 1200 V blocking voltage handles 1000 V DC string open-circuit voltages with margin, while the TRENCHSTOP IGBT4 die delivers the efficiency required to meet 98% European weighted efficiency targets. The integrated NTC enables overtemperature derating during peak afternoon output.
Empfohlen
Servo Amplifier
Servo amplifiers for CNC machines and robotics use the FS35R12W1T4 to drive three-phase servo motors with high dynamic response. The module's 10 us short-circuit ruggedness and low-inductance EasyPACK 1B layout enable safe operation during hard-switching servo current loops at 8-16 kHz PWM. The integrated EC4 diodes reduce reverse-recovery losses that would otherwise stress the DC-link capacitors during fast deceleration regenerations.
Empfohlen
Uninterruptible Power Supply (UPS)
Online double-conversion UPS systems in the 15-30 kVA range use the FS35R12W1T4 as the inverter stage that produces clean sine-wave output from a battery-backed DC bus. The 1200 V VCE rating covers 384-480 V battery strings with derating margin, and the six-pack configuration eliminates the need for discrete IGBT bridges that would require complex gate-driver isolation. The integrated NTC supports thermal management in continuous-rated data-center UPS designs.
Empfohlen
Welding Power Supply
Industrial welding inverters benefit from the FS35R12W1T4's robust short-circuit handling and EasyPACK 1B thermal performance. Welding loads present repetitive short-circuit transients that stress IGBT modules; the IGBT4 die's 10 us short-circuit withstand time is engineered for this duty cycle. The baseplate-less design allows direct cold-plate mounting for liquid-cooled welder enclosures where traditional through-hole IGBTs would fail under thermal cycling.
Empfohlen
Electric Vehicle Charging Station
Three-phase 22 kW AC EV chargers and 25 kW DC fast-charging modules use the FS35R12W1T4 as the grid-tie inverter bridge. Its 1200 V rating covers 800 V battery architectures with derating margin, and the EasyPACK 1B footprint is widely supported in compact charger enclosures. The integrated NTC enables CAN-reported thermal telemetry required for ISO 15118 charging protocol compliance, while the IGBT4 die delivers the 97%+ efficiency needed for utility-grade charger installations.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für FS35R12W1T4 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | FS35R12W1T4_B11 | FS35R12W1T7 | FP35R12W2T4 |
|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | EasyPACK 1B (screw-mount) | EasyPACK 1B (PressFIT) | EasyPACK 1B | EasyPACK 2B (larger) |
| Collector-Emitter Voltage (VCE) | 1200 V | 1200 V | 1200 V | 1200 V |
| Nominal Collector Current | 35 A | 35 A | 35 A | 35 A |
| IGBT Die Technology | TRENCHSTOP IGBT4 | TRENCHSTOP IGBT4 | TRENCHSTOP IGBT7 (latest) | TRENCHSTOP IGBT4 |
| Diode Technology | Emitter Controlled 4 (EC4) | EC4 | EC7 (upgraded) | EC4 |
| Integrated NTC | Yes | Yes | Yes | Yes |
| Assembly Method | Solder pins | PressFIT pins (solder-free) | Solder pins | Solder pins |
Wichtigste Unterscheidungsmerkmale
- TRENCHSTOP IGBT4 technology with 10 us short-circuit ruggedness (vs. FS35R12W1T7 (IGBT7 variant))
- Baseplate-less EasyPACK 1B package with low thermal mass (vs. EasyPACK 2B modules (larger footprint))
- Integrated NTC eliminates external temperature sensor BOM (vs. Discrete IGBTs requiring external NTC)
Designhinweise
Estimated: DC-link loop inductance must stay below 30 nH to prevent VCE overshoot beyond the 1200 V rating. Use a laminated bus-bar sandwich with positive and negative DC rails on parallel planes separated by a thin dielectric. The EasyPACK 1B baseplate-less design allows the bus bar to be mounted directly to the module's power terminals for minimum stray inductance.
Mount the FS35R12W1T4 to a cold plate or forced-air heatsink with thermal compound (TIM) applied at less than 50 um bond-line thickness. The baseplate-less EasyPACK 1B has higher thermal resistance than baseplate modules, so plan for a heatsink with thermal resistance below 0.1 K/W at full 25 A RMS load. Always de-rate above 90 C case temperature per the datasheet thermal curves.
Do not exceed 16 kHz switching frequency without re-evaluating switching losses against the published Eon/Eoff curves. The IGBT4 die is optimized for 8-16 kHz; pushing beyond 20 kHz wastes efficiency gains in the EC4 diode recovery. Always read the NTC through an isolated amplifier (e.g., digital isolator with ADC) to avoid ground loops that can damage the gate driver.
Compliance-Informationen
RoHS and REACH compliant per Infineon product page. Industrial-grade (not AEC-Q100 automotive qualified) - select FS35R12W1T4_B11 if automotive grade is required.
