Texas Instruments

INA2128UA - Dual Precision Instrumentation Amplifier | Texas Instruments

Teilenummer: INA2128UA ✓ Aktiv
50 uV Vdss 5 nA Id 16-pin SOIC (DW) Package
MOQ: 1 |

INA2128UA Übersicht

Texas Instruments INA2128UA is a dual, low-power instrumentation amplifier with two independent channels, gain adjustment from 1 to 10,000 using one external resistor, and a 16-pin SOIC package. Each channel provides a maximum offset voltage of 50 uV, maximum offset drift of 0.5 uV/degree C, maximum input bias current of 5 nA, and a minimum common-mode rejection ratio of 120 dB.

An instrumentation amplifier is a differential-input amplifier optimized for measuring small signals superimposed on larger common-mode voltages. Its internal three-op-amp architecture provides matched input stages, high differential input impedance, accurate gain control, and strong common-mode rejection. This makes the INA2128 suitable for sensor interfaces where a low-level differential signal must be amplified accurately in the presence of substantial DC voltage, industrial noise, or ground-potential differences.

The INA2128 combines low offset and drift with a minimum 120 dB CMRR. Input overload protection extends to plus or minus 40 V, helping the amplifier tolerate accidental large input transients. Its supply range of 2.25 V to 18 V supports single-supply and dual-supply instrumentation systems. A single external resistor selects the gain, reducing the number of precision components needed for adjustable measurement channels.

The versatile three-op-amp design uses current-feedback input circuitry to preserve bandwidth at higher gains. According to the Texas Instruments datasheet, bandwidth remains 200 kHz at a gain of 100. This combination of precision DC behavior and usable high-gain bandwidth makes the device suitable for bridge sensors, current measurement, biomedical instrumentation, and industrial data-acquisition systems.

Typical uses include low-voltage pressure and strain-signal conditioning, thermocouple and RTD amplification, current-shunt measurement, battery-cell monitoring, and precision analog-front-end designs. The two-channel configuration is especially useful when a system must process two related sensor inputs while maintaining consistent gain-setting and supply architecture across both channels.

Choose gain resistors with suitable tolerance and temperature coefficient, and verify common-mode headroom at the lowest supply voltage. Input and reference pins require careful layout because leakage, parasitic resistance, and asymmetric copper can degrade CMRR. The gain-setting resistor should be placed close to the device, with symmetrical input routing where practical.

This product overview combines manufacturer specifications, package details, application guidance, and drop-in replacement information to support faster component selection and PCB planning. It also identifies the trade-offs involved when changing amplifier families, including gain range, bandwidth, offset performance, supply voltage, and protection requirements.

Drop-in-Alternativen für INA2128UA – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit INA2128UA (gleiche Bauform und Footprint) – abweichend in Package.

Texas Instruments
Package: 16-pin SOIC
Vergleichen mit INA2128UA →

INA2128U

✅ Drop-In
Texas Instruments
📦 SOIC-16 (DW)
Dual instrumentation amplifier · Three-op-amp instrumentation-amplifier design · 2 channels · 1 to 10,000 · 1 external resistor · 200 kHz · Current-feedback · Single-ended and differential

Preis auf Anfrage

Datenblatt ansehen →

INA2128UA-1

✅ Drop-In
📦 SOIC-16 (DW)
Same INA2128 core gain range of 1 to 10,000 and 200 kHz bandwidth at gain 100, representing 0% difference in those ratings; verify the ordering-specific accuracy and qualification limits

📋 Referenzalternative (nicht im Katalog)

INA2128UA Grenzwerte & elektrische Eigenschaften

Amplifier Type Dual instrumentation amplifier
Number of Channels 2 channels
Gain Range 1 to 10,000
Gain Setting Method 1 external resistor
Bandwidth at Gain 100 200 kHz
Maximum Offset Voltage 50 uV
Maximum Offset Drift 0.5 uV/degree C
Maximum Input Bias Current 5 nA
Minimum Common-Mode Rejection 120 dB
Input Overload Protection plus or minus 40 V
Supply Voltage Range 2.25 V to 18 V
Internal Architecture 3-op-amp design
Input Circuitry Current-feedback
Gehäuse 16-pin SOIC (DW)
Montageart Surface mount

INA2128UA 16-pin soic (dw) Pinbelegungsleitfaden

Pinbelegung für INA2128UA (16-pin soic (dw)-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für INA2128UA im 16-pin soic (dw)-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für INA2128UA.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

INA2128UA ist geeignet für 6 Anwendungs: Strain-Gauge Bridge Measurement, Current-Shunt Monitoring, Battery-Cell Voltage Acquisition, Precision Pressure Sensor Interface, Biomedical Sensor Signal Conditioning, Industrial Data Acquisition.

🏭

Strain-Gauge Bridge Measurement

The INA2128UA fits strain-gauge and resistive bridge front ends that produce small differential signals on a substantial common-mode voltage. Its two independently adjustable channels can process complementary bridge outputs or two related sensing elements, while the 1 to 10,000 gain range accommodates both millivolt-level and low-level volt signals. Maximum offset voltage of 50 uV and maximum drift of 0.5 uV/degree C help stabilize measurements over temperature, and 120 dB minimum CMRR suppresses common-mode excitation and coupled industrial noise. Gain is established with one resistor, allowing the design to use matched high-precision resistors while retaining a straightforward calibration structure.

⚡

Current-Shunt Monitoring

The INA2128UA is appropriate for bidirectional or unidirectional current measurement using a low-ohm shunt in the high-current path. Its maximum input bias current of 5 nA limits the error introduced into high-impedance sensing nodes, while plus or minus 40 V input protection improves tolerance of transient voltage during fault conditions. Two channels allow simultaneous measurement of two shunt sections or power-rail currents, and gains up to 10,000 provide useful amplification for low-value shunts. The 200 kHz bandwidth at gain 100 permits measurement of current waveforms beyond static DC without requiring a higher-speed alternative.

🔋

Battery-Cell Voltage Acquisition

The dual-channel INA2128UA can monitor adjacent battery cells or divided high-voltage bus sections in a battery-management system. Its 2.25 V to 18 V supply range supports low-voltage sensing rails, and the 120 dB minimum common-mode rejection helps isolate small voltage differences from the much larger potential shared by series-connected cells. Maximum offset of 50 uV and drift of 0.5 uV/degree C are particularly valuable when accurate cell balancing depends on measuring small voltage differences. The two-channel architecture reduces the number of separate amplifiers needed for redundant or differential cell measurements.

🧩

Precision Pressure Sensor Interface

The INA2128UA supports pressure and force sensors that generate a differential millivolt output on a common-mode baseline. The 5 nA maximum input bias current minimizes loading of high-impedance sensor outputs, and the 50 uV maximum offset reduces errors in pressure readings that depend on detecting small differential signals. Adjustable gains from 1 to 10,000 allow the same amplifier family to serve different sensor sensitivities. With 200 kHz bandwidth at gain 100, the device can also handle dynamic pressure events while retaining low DC error for static measurements.

💊

Biomedical Sensor Signal Conditioning

The INA2128UA can condition low-amplitude differential signals from biomedical and diagnostic sensors where offset, drift, and common-mode rejection determine measurement quality. Its 50 uV maximum offset and 0.5 uV/degree C maximum drift limit temperature-dependent baseline errors, while 120 dB minimum CMRR helps reject mains-coupled interference and body-coupled common-mode voltage. The dual-channel configuration supports two sensors or a differential and reference channel. Plus or minus 40 V input protection is useful for robust connector interfaces, provided signal amplitude and duration remain within the device's absolute-maximum ratings.

📡

Industrial Data Acquisition

The INA2128UA is well suited to industrial data-acquisition modules that combine slow precision measurements with occasional higher-bandwidth signals. Two channels support redundant sensors, bridge measurements, or gain stages feeding multiplexed converters, while the 120 dB minimum CMRR reduces errors from long cables and grounded machinery. The 200 kHz bandwidth at gain 100 provides useful signal bandwidth, and gain selection through one external resistor simplifies calibration across multiple board variants. Plus or minus 40 V input protection improves robustness at connector-exposed inputs, although protection-network design must preserve accuracy and bandwidth.

What are the key specifications of INA2128UA?
The INA2128UA provides two precision instrumentation-amplifier channels in a 16-pin SOIC package. According to the Texas Instruments datasheet, its gain is adjustable from 1 to 10,000 with one external resistor, bandwidth is 200 kHz at a gain of 100, maximum offset voltage is 50 uV, and maximum input bias current is 5 nA. The device also offers 120 dB minimum CMRR, plus or minus 40 V input protection, and operation from 2.25 V to 18 V.
What is the operating voltage of INA2128UA?
The INA2128UA operates from 2.25 V to 18 V, allowing use with low-voltage single supplies as well as conventional dual supplies. The Texas Instruments product documentation identifies a 125 V maximum supply rating for related device information, while the specified operating supply range remains 2.25 V to 18 V. Designers must also verify that the input common-mode and output swing remain within the limits of the selected supply configuration.
What is the gain range of INA2128UA?
The INA2128UA supports gains from 1 to 10,000, with the gain selected by one external resistor. According to the Texas Instruments datasheet, the internal current-feedback input circuitry maintains 200 kHz bandwidth at a gain of 100. This broad range covers precision buffer-level measurements as well as high-gain sensor amplification, while a single gain-setting component simplifies calibration and inventory management.
Where can I download the INA2128UA datasheet PDF?
The official Texas Instruments INA2128UA datasheet is available from the manufacturer PDF link on this page. It describes the dual three-op-amp architecture, gain-setting equation, supply limits, electrical characteristics, input protection, typical application circuits, and package drawings. Use the manufacturer document for design calculations and PCB implementation, and consult the INA2128 product page for ordering options and lifecycle information.
Where can I find the INA2128UA pinout?
The INA2128UA uses a 16-pin SOIC package, and its complete numbered pin assignment is shown in the manufacturer datasheet. The package drawing and pin-description table should be used to assign supply, ground, input, output, feedback, and reference connections. The public product listing confirms the 16-pin SOIC format, but the physical pin map should always be taken from the datasheet associated with the exact ordering code.
Where to buy INA2128UA online?
Use the Request a Quote form on this page to request INA2128UA pricing, availability, and order handling from XAIPART. The component is a Texas Instruments dual instrumentation amplifier in the 16-pin SOIC package. For production planning, identify the required package suffix, quantity, and reel or tray format before requesting a formal quotation and delivery commitment.
What is the price of INA2128UA?
Current INA2128UA pricing depends on quantity, package suffix, and order format, so use the Request a Quote form on this page for a purchase-ready quotation. The component is listed as a Texas Instruments dual instrumentation amplifier in a 16-pin SOIC package. A quote response should confirm the exact MPN, source condition, quantity breaks, available packaging, and expected delivery schedule.
What is the lead time for INA2128UA?
Current lead time for INA2128UA depends on the requested quantity, package suffix, and market availability. Request a Quote on this page and include the required quantity, target date, and acceptable reel or tray format. The manufacturer lists the INA2128UA in a 16-pin SOIC package, but a production lead time should be confirmed for the exact order configuration.
Is INA2128UA in stock?
Stock availability for INA2128UA should be confirmed through the Request a Quote form on this page because inventory can change with order quantity and packaging format. The manufacturer product listing identifies the INA2128UA as a Texas Instruments dual instrumentation amplifier in a 16-pin SOIC package. Include your required quantity and production schedule to obtain a current availability and delivery response.
INA2128UA vs INA2128U - which is better for a new design?
The INA2128UA is the appropriate choice when a new design requires the maximum 50 uV offset specification and maximum 0.5 uV/degree C drift rating. The INA2128U uses the same Texas Instruments INA2128 family and 16-pin SOIC footprint, but its exact accuracy grade should be checked against the target error budget. Both provide two channels, gains from 1 to 10,000, and 200 kHz bandwidth at gain 100.
When should I choose INA2128UA over INA2132UA?
Choose the INA2128UA when the design prioritizes a 50 uV maximum offset voltage, 0.5 uV/degree C maximum drift, 5 nA maximum input bias current, and 120 dB minimum CMRR. An INA2132UA can be considered when its lower-power characteristics better match the application, but it should not replace the INA2128UA without checking gain range, bandwidth, supply behavior, and error specifications. Both are Texas Instruments dual instrumentation-amplifier families.
Is INA2128UA suitable for low-voltage sensor measurement?
The INA2128UA is suitable for low-voltage sensor measurement when the sensor output and required common-mode voltage fit within the amplifier's operating limits. Its 2.25 V minimum supply supports compact single-supply systems, while 50 uV maximum offset, 5 nA maximum input bias current, and 120 dB minimum CMRR help preserve small differential signals. The 200 kHz bandwidth at gain 100 also supports measurements beyond static DC.
What is the best drop-in replacement for INA2128UA?
The INA2128U is the closest identified same-footprint alternative because it belongs to the same Texas Instruments INA2128 family and is offered in a 16-pin SOIC package. Its gain range and 200 kHz bandwidth at gain 100 match the INA2128UA, but offset and drift limits must be compared before substitution. The cross-reference results do not identify a cross-brand drop-in replacement with verified pin compatibility.
Can INA2128U replace INA2128UA?
The INA2128U can be considered as a same-package, pin-compatible replacement when its offset, drift, bias-current, and qualification characteristics meet the design requirements. According to Texas Instruments documentation, both devices use the INA2128 family architecture, provide two channels, support gains from 1 to 10,000, and deliver 200 kHz bandwidth at gain 100. The principal selection issue is the accuracy grade rather than the basic voltage gain and bandwidth.
What is the best Analog Devices equivalent for INA2128UA?
No Analog Devices or other cross-brand drop-in equivalent was confirmed by the available cross-reference results, so assigning a specific replacement would be misleading. A valid cross-brand substitution must match the 16-pin SOIC footprint, pin functions, gain-setting method, supply range, input and output common-mode limits, bandwidth, offset, drift, bias current, and protection behavior. Use the Request a Quote form to discuss an approved-source migration with the engineering team.

Technische Referenzdaten für INA2128UA – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the INA2128UA for precision dual-channel measurements that require low offset, low drift, high CMRR, and modest input bias current. It is particularly suitable for bridge sensors, current shunts, battery-cell monitoring, and industrial analog-front-end designs where the signal is differential and the common-mode voltage can be substantial. The INA2128U is the closest identified same-family alternative because it shares the SOIC-16 footprint, two-channel architecture, 1 to 10,000 gain range, and 200 kHz bandwidth at gain 100; select it only after checking its offset and drift limits. INA2128UA-1 offers another same-family ordering option, but its exact accuracy and qualification requirements should be compared with the target application. No cross-brand drop-in replacement was confirmed, so a different manufacturer's amplifier should be considered only after verifying every pin function, supply limit, common-mode range, gain equation, bandwidth, and protection specification.

Vergleich mit Alternativen

Parameter Dieses Produkt INA2128U INA2128UA-1
Brand Texas Instruments Texas Instruments Texas Instruments
Package SOIC-16 (DW) SOIC-16 (DW) SOIC-16 (DW)
Channel Count 2 channels 2 channels 2 channels
Gain Range 1 to 10,000 1 to 10,000 1 to 10,000
Bandwidth at Gain 100 200 kHz 200 kHz 200 kHz
Supply Voltage Range 2.25 V to 18 V 2.25 V to 18 V 2.25 V to 18 V
Input Protection plus or minus 40 V plus or minus 40 V plus or minus 40 V

Wichtigste Unterscheidungsmerkmale

  • High accuracy for low-level differential measurements (vs. INA2128U)
  • Dual-channel instrumentation amplification (vs. INA2128U)
  • Strong common-mode rejection (vs. INA2128UA-1)

Designhinweise

Keep the gain-setting resistor close to the INA2128UA gain pin, and route each input channel symmetrically. Use a common ground reference for both amplifier channels and avoid placing long, high-impedance input traces next to switching nodes. Refer to the manufacturer datasheet pin-description and application diagrams when assigning the 16-pin SOIC connections.

Do not assume the input-protection rating changes the normal operating range. The plus or minus 40 V protection rating describes tolerance of input voltage, while valid measurement operation still requires compliance with the specified common-mode and absolute-maximum limits. Also verify output swing at the selected supply voltage before choosing a gain that could saturate the amplifier.

For maximum CMRR, use equal input impedance and matched resistor networks on both sides of each differential input. Keep leakage from PCB contamination and flux residue under control because the 5 nA maximum input bias current makes high-impedance nodes sensitive to contamination. A protective resistor can limit transient current, but its value should preserve bandwidth and input impedance at the intended gain.

Place input and reference components adjacent to their corresponding pins, with the shortest practical return path to the exposed supply and ground structure. The SOIC-16 package benefits from stable ground-plane continuity beneath the device. Avoid adding test-point loops that increase parasitic capacitance on high-gain input nodes, particularly when 200 kHz bandwidth at gain 100 is a system requirement.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

Compliance claims require confirmation for the exact INA2128UA ordering code and package. The manufacturer product and datasheet links should be reviewed during production qualification.

Ähnliche Suchanfragen

INA2128UA datasheet INA2128UA pinout INA2128UA datasheet pdf INA2128UA equivalent INA2128UA replacement INA2128UA vs INA2128U INA2128UA footprint INA2128UA application circuit INA2128UA SOIC-16 pinout Texas Instruments INA2128UA INA2128UA price INA2128UA stock INA2128 120dB CMRR amplifier INA2128UA 200kHz bandwidth

Verwandte Bauteile & Begriffe

Texas Instruments INA2128UA INA2128U INA2128UA-1 INA2128 instrumentation amplifier precision amplifier differential amplifier three-op-amp architecture current-feedback input common-mode rejection ratio CMRR input offset voltage offset drift input bias current gain error gain range external gain resistor input overload protection single-supply operation dual-supply operation SOIC-16 surface-mount package sensor interface current-shunt measurement
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen