M29W320DB70N3E - 32Mbit 70ns NOR Flash 48-TSOP | Micron
Teilenummer: M29W320DB70N3E ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $2.89 | $2,89 |
| 10 | $2.65 | $26,50 |
| 100 | $2.4 | $240,00 |
| 500 | $2.15 | $1.075,00 |
| 1.000 | $1.95 | $1.950,00 |
M29W320DB70N3E Übersicht
Parallel NOR Flash is a non-volatile memory technology in which data is read via a parallel address/data bus directly mapped into the host processor's address space. Within the memory hierarchy, NOR Flash sits alongside SRAM and DRAM as code-storage memory: unlike NAND Flash, NOR supports random access to every byte, making it the standard choice for boot code, firmware, and parameter storage in embedded systems.
Key features include a 70 ns access time suitable for zero-wait-state execution from slower buses, an asymmetric block architecture with a boot block for code storage, single-VCC programming and erasure, and an optional VPP = 12V supply for accelerated fast programming. The device supports Common Flash Interface (CFI) for software discovery of flash parameters and offers block protection schemes to safeguard critical code sectors.
Architecturally, the M29W320DB family organizes 32 Mbit into non-uniform parameter blocks and main blocks in a bottom-boot-block arrangement (the DB suffix). Operating from a 2.7V to 3.6V supply for program, erase, and read operations, the memory defaults to read mode at power-up, simplifying boot ROM designs. Automatic program and erase algorithms with status polling reduce host CPU overhead.
Typical applications include boot firmware storage in set-top boxes, industrial PLCs and motor drives, networking equipment line cards, automotive infotainment modules, and embedded controllers requiring in-system firmware update capability. The 70 ns access time allows direct code execution without lengthy wait states on many 16-bit buses.
When designing with this device, ensure VCC ramp-rate and power-supply decoupling comply with datasheet requirements to avoid spurious writes during power-up, and verify block protection settings before field deployment.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet. Prices referenced as of 2026-09-02.
Drop-in-Alternativen für M29W320DB70N3E – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit M29W320DB70N3E (gleiche Bauform und Footprint) – abweichend in Organization, Interface, Memory Type, Density, Supply Voltage (VCC).
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
M29W320DB70N3F
✅ Drop-In✓ Auf Lager
$1.3 / Stück
Datenblatt ansehen →M29W320DB70N6
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
M29W320DT70N3F
✅ Drop-In✓ Auf Lager
$2.95 / Stück
Datenblatt ansehen →M29W320EB70N6E
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
M29W320DB70N3E Technische Daten
| Speichertyp | NOR Flash |
| Density | 32 Mbit (33554 kbits) |
| Speicherorganisation | 2M x 16 |
| Number of Words | 2000 k |
| Bits per Word | 16 bits |
| Access Time | 70 ns |
| Supply Voltage (VCC) | 2.7 V to 3.6 V |
| VPP Fast Program Voltage | 12 V (optional) |
| Schnittstelle | Parallel |
| Block Architecture | Non-uniform parameter blocks, boot block (bottom boot, DB type) |
| Betriebstemperatur | -40C to +125C |
| Gehäuse | 48-TSOP I |
| Montageart | Surface Mount |
| RoHS-Status | ROHS3 Compliant |
| Programming Mode | Single VCC program/erase; automatic program/erase with status polling |
| Power-Up Mode | Read mode (default) |
M29W320DB70N3E 48-tsop i Pinbelegungsleitfaden
Pinbelegung für M29W320DB70N3E (48-tsop i-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.
Keine detaillierten Pinbelegungsdaten verfügbar für M29W320DB70N3E.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
M29W320DB70N3E ist geeignet für 6 Anwendungs: Boot Firmware Storage, Industrial PLCs and Motor Drives, Set-Top Boxes and Consumer Electronics, Networking Equipment Line Cards, Automotive Infotainment Modules, Embedded Test and Measurement Instruments.
Boot Firmware Storage
The M29W320DB70N3E is a classic boot ROM device: its bottom boot block places small parameter blocks at address 0, where reset vectors live, while 70 ns access time minimizes wait states during early code execution. Because the device powers up in read mode automatically, the host CPU can fetch code immediately without configuration commands - a property parallel NOR uniquely offers compared to NAND or SPI flash. The 2M x16 organization maps directly into 16-bit processor address spaces, and block protection lets you lock boot sectors against accidental erase during field firmware updates.
Empfohlen
Industrial PLCs and Motor Drives
Industrial controllers require non-volatile code and parameter storage that survives power cycles and harsh temperatures; the M29W320DB70N3E covers -40C to +125C, exceeding typical factory-floor ambient requirements. The 32 Mbit density holds application firmware plus logged parameters, and single-supply 3.3V operation simplifies power tree design in cabinets already running 3.3V logic. In-system programming via the standard command-set interface allows firmware updates without removing the device, while block protection safeguards calibration data stored in parameter blocks against accidental erasure during routine software updates.
Empfohlen
Set-Top Boxes and Consumer Electronics
Set-top box designs traditionally boot from parallel NOR flash because the CPU needs immediate random-access code execution at reset. The M29W320DB70N3E's 70 ns access time supports direct execution from the boot bus, while 32 Mbit accommodates bootloader, kernel, and splash-screen assets. The M29W320DB command set is supported by common bootloaders (U-Boot and vendor SDKs), reducing software integration effort. As volumes in this market are high, the availability of drop-in alternates such as M29W320EB70N6E provides dual-source sourcing resilience at the same footprint.
Empfohlen
Networking Equipment Line Cards
Routers and switch line cards use parallel NOR flash to store boot code and board-level configuration that must be present before the main OS loads from NAND or network. The M29W320DB70N3E offers deterministic read timing (70 ns) with no bad-block management overhead, which is critical for reliable boot in carrier equipment. Common Flash Interface support lets board management software query block layout and protection status programmatically, and the 48-TSOP I package fits dense card layouts with standard reflow assembly.
Empfohlen
Automotive Infotainment Modules
Head units and cluster controllers store boot code in parallel NOR for fail-safe start-up. The M29W320DB70N3E's -40C to +125C range spans under-hood-adjacent and cabin environments, and its 3.3V operation integrates with standard automotive low-voltage rails. Block protection enables secure boot schemes in which the bootloader region is hardware-locked, protecting against tampering and corrupted OTA updates. Engineers should confirm AEC-Q100 qualification of the specific ordering code with Micron before release in safety-relevant ECUs, as qualification status is grade-dependent.
Empfohlen
Embedded Test and Measurement Instruments
Oscilloscopes, data loggers, and bench instruments store firmware, calibration constants, and instrument settings in parallel NOR flash. The M29W320DB70N3E provides 32 Mbit of reliably readable code storage with byte-granular random access for calibration table lookup at run time. Its automatic program/erase algorithm with status polling lets the instrument firmware update itself in the field with minimal CPU supervision, and the non-uniform block map lets designers place small calibration blocks adjacent to large firmware blocks, balancing write endurance and update granularity in one device.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für M29W320DB70N3E – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | M29W320DB70N3F | M29W320DB70N6 | M29W320DT70N3F | M29W320EB70N6E |
|---|---|---|---|---|---|
| Package | 48-TSOP I | 48-TSOP I - same | 48-TSOP I - same | 48-TSOP I - same | 48-TSOP I - same |
| Brand | Micron Technology | Micron Technology | Micron Technology | Micron Technology | STMicroelectronics |
| Density | 32 Mbit (2M x16) | 32 Mbit | 32 Mbit | 32 Mbit | 32 Mbit |
| Access Time | 70 ns | 70 ns | 70 ns | 70 ns | 70 ns |
| Supply Voltage | 2.7 V to 3.6 V | 2.7 V to 3.6 V | 2.7 V to 3.6 V | 2.7 V to 3.6 V | 2.7 V to 3.6 V |
| Block Architecture | Boot block (DB, bottom boot) | Boot block (bottom, DB) | Boot block (bottom, DB) | Boot block (top, DT) | 8 parameter + 63 main blocks (E type) |
Wichtigste Unterscheidungsmerkmale
- Bottom boot block layout for reset-vector code (vs. M29W320DT70N3F)
- Second-source availability from STMicroelectronics (vs. M29W320EB70N6E)
- Wide -40C to +125C temperature range (vs. M29W320EB70N6E)
Designhinweise
The M29W320DB70N3E requires VCC within 2.7V to 3.6V and monotonic power ramps. Micron datasheet guidance for the M29W family warns that non-monotonic VCC transitions during power-up or brownout can trigger spurious write operations, corrupting block contents. Add a supply supervisor that holds RESET low until the 3.3V rail is stable, and decouple each VCC pin with 0.1 uF ceramics placed within a few millimeters plus 10 uF bulk capacitance.
Route the 16-bit data bus and address bus with matched lengths where the processor bus exceeds roughly 50 MHz; for slower embedded buses, ordinary short traces suffice. Keep series termination resistors (22-33 ohm) near the driver on address lines to control ringing into the TSOP package. Provide a solid ground plane under the flash to reduce read-timing jitter and improve signal integrity of the 70 ns access path.
Two frequent mistakes with the M29W320DB family: (1) assuming block layout from a different variant - the DB (bottom boot) map differs from DT (top boot) and the E-type block architecture, so flash drivers must match the exact suffix; (2) ignoring VPP handling - if your board ties VPP to VCC for single-supply operation, confirm no 12V fast-programming circuitry shorts the rail. Always verify block protection state before field OTA updates to avoid bricking locked boot sectors.
Compliance-Informationen
ROHS3 compliant per ICS-100 distributor listing. REACH, halogen-free, and conflict-minerals declarations not stated in provided data - request manufacturer certificate from Micron.
