MC56F8357VPYE - 16-bit 56800E DSC, 256KB Flash, 60MHz | NXP
Teilenummer: MC56F8357VPYE ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $21.5 | $21,50 |
| 10 | $19.35 | $193,50 |
| 100 | $17.2 | $1.720,00 |
| 500 | $15.4 | $7.700,00 |
| 1.000 | $13.85 | $13.850,00 |
MC56F8357VPYE Übersicht
A Digital Signal Controller (DSC) is a hybrid MCU+DSP that combines a microcontroller's peripheral set and deterministic interrupt response with a digital signal processor's MAC engine and single-cycle hardware multiply-accumulate. The 56800E family sits in the taxonomy: DSC -> microcontroller -> embedded processor -> semiconductor IC. Unlike general-purpose MCUs, DSCs target closed-loop control and real-time signal processing in a single deterministic core, eliminating the need for a separate DSP chip.
Key features include a 60 MHz 56800E core with single-cycle 16-bit x 16-bit multiply-accumulate, 256KB flash with security, 10K x 16 RAM, and an external oscillator interface. The 160-LQFP platform exposes the full peripheral set - eCAN, two SCI, two SPI, plus PWM and timers - which is essential for motor-control, power-conversion, and sensor-processing designs. The 12-bit ADC (16 channels) delivers conversion rates high enough for digital control loops operating at tens of kilohertz.
Architecturally the 56800E core uses a Harvard-style three-bus design with separate program and data paths, a unified 16-bit datapath, and zero-overhead looping for DSP kernels. Hardware DO-loop and REP instructions accelerate FIR/IIR and PID routines, and the on-chip memory map keeps critical vectors and interrupt service routines in zero-wait-state flash. The peripheral set is mapped through NXP's standard INTC module for deterministic interrupt arbitration.
Typical applications include industrial motor control (BLDC, PMSM, ACIM variable-frequency drives), switch-mode power supplies and digital power conversion, automotive body and chassis controllers, sensor-less motor drives, and uninterruptible power supplies. The 160-LQFP footprint is common across the 56F83xx series, simplifying board layout across the family.
When designing with the MC56F8357VPYE, always validate timing on the external oscillator and reserve the JTAG pins (TDI/TDO/TMS/TCK/TRST) for in-system programming and debug - tap them out to a header even if not populated. For motor-control loops pair the ePWM and ADC modules carefully because the ADC conversion-start trigger timing relative to the PWM zero event defines achievable control bandwidth. This page synthesizes distributor pricing, cross-reference data, and practical design notes not found in the manufacturer datasheet alone.
Drop-in-Alternativen für MC56F8357VPYE – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit MC56F8357VPYE (gleiche Bauform und Footprint) – abweichend in ADC, Core, Package, Quadrature Decoder, PWM Modules.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
MC56F8357MPYE
✅ Drop-In✓ Auf Lager
$17.8 / Stück
Datenblatt ansehen →MC56F8367VPYE
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MC56F8347VPY60
✅ Drop-In✓ Auf Lager
$19.8 / Stück
Datenblatt ansehen →MC56F8347MPYE
✅ Drop-In✓ Auf Lager
$16.4063 / Stück
Datenblatt ansehen →MC56F8357VPYE Grenzwerte & elektrische Eigenschaften
| Core | 56800E (16-bit DSC) |
| Program Memory Size | 256 KB (128K x 16) Flash |
| RAM Size | 10K x 16 |
| Maximum CPU Clock | 60 MHz |
| Datenbusbreite | 16-bit |
| Operating Voltage (Vcc/Vdd) | 2.25 V to 3.6 V (3.3 V typical) |
| Betriebstemperatur | -40 °C to +105 °C (industrial) |
| ADC | 16-channel x 12-bit |
| Number of I/O Pins | 76 |
| Communication Interfaces | CAN, SCI x2, SPI x2 |
| Gehäuse | 160-pin LQFP (24 x 24 mm, LFQFP) |
| Montageart | Surface Mount |
| Oscillator Type | External |
| Data Converters | A/D 16x12b |
MC56F8357VPYE 160-pin lqfp (24 x 24 mm, lfqfp) Pinbelegungsleitfaden
Pinbelegung für MC56F8357VPYE (160-pin lqfp (24 x 24 mm, lfqfp)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für MC56F8357VPYE.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
MC56F8357VPYE ist geeignet für 6 Anwendungs: Industrial BLDC / PMSM Motor Control, Digital Switch-Mode Power Supply (SMPS) Control, Automotive Body and Chassis Controllers, Industrial Servo Drives and Robotics, Uninterruptible Power Supplies (UPS), Sensor-Less Motor Control (FOC for Fans and Pumps).
Industrial BLDC / PMSM Motor Control
The MC56F8357VPYE is purpose-built for field-oriented control of brushless DC and permanent-magnet synchronous motors. Its 60 MHz 56800E core executes FOC torque loops inside 16 microseconds, while the 16-channel 12-bit ADC delivers conversions fast enough to sample phase currents synchronously to the eFlexPWM zero events. The 76 I/O pins comfortably drive three-phase gate-driver signals, Hall/encoder feedback, fault inputs, and a CAN network interface on a single chip, eliminating the need for an external DSP. Designers typically pair this DSC with a 3.3 V LDO and external gate driver (e.g. NXP GD3000) to construct a complete 24 V to 48 V variable-frequency drive.
Empfohlen
Digital Switch-Mode Power Supply (SMPS) Control
For digitally controlled AC-DC and DC-DC converters the MC56F8357VPYE provides the throughput required for average-current-mode control and adaptive dead-time compensation. The 56800E core's single-cycle MAC handles voltage-mode and current-mode control loops at 50-200 kHz switching frequencies without saturating CPU bandwidth. The on-chip 12-bit ADC synchronizes to the PWM carrier for sub-100 ns sample-point accuracy, which is critical for phase-shifted full-bridge and totem-pole PFC topologies. The 256 KB Flash absorbs firmware for soft-start, MPPT, and telemetry, while the CAN/SCI ports provide a Modbus/PowerMbus supervisory link to the host controller.
Empfohlen
Automotive Body and Chassis Controllers
The MC56F8357VPYE serves inside automotive body and chassis ECUs for active suspension, electric power steering assistance, and HVAC flap control. Its -40 °C to +105 °C industrial temperature range covers cabin-mounted electronics, while the CAN interface links seamlessly to the vehicle CAN-FD backbone. The 56800E DSP extensions execute Kalman-filter sensor fusion fast enough to fuse a 6-axis IMU with wheel-speed inputs at 1 kHz, enabling active-damping and lane-keeping features. Although this part is industrial-grade rather than AEC-Q100, designers targeting automotive use must select the Q-qualified derivatives from the 56F83xx family.
Empfohlen
Industrial Servo Drives and Robotics
Six-axis servo drives and CNC spindle controllers use the MC56F8357VPYE to execute current, velocity, and position loops at the kilohertz rates required for precision machining. The 56800E core's zero-overhead hardware DO-loops accelerate PID and feed-forward control math, while the 76 I/O lines handle encoder quadrature, index pulses, and endat 2.2 feedback on multi-axis machines. CANopen and EtherCAT (via external MAC) supervisory layers ride on top of the torque loop, giving designers a deterministic control hierarchy. The 160-LQFP footprint is shared across the 56F83xx series so a single PCB accepts 128 KB, 256 KB or 512 KB Flash derivatives.
Empfohlen
Uninterruptible Power Supplies (UPS)
Online double-conversion UPS systems embed the MC56F8357VPYE as the inverter controller, where its 60 MHz 56800E core implements space-vector modulation at 4-20 kHz carrier frequencies with sub-microsecond timing margins. The on-chip ADC samples DC-bus voltage, output current, and transformer temperature in synchronism with the PWM carrier, while redundant SCI ports link to the LCD front panel and SNMP/MODBUS host. The 256 KB Flash absorbs the full state-machine and parameter-storage firmware; the 10K x 16 RAM retains runtime waveform buffers without external SRAM. The VPYE temperature grade supports the 105 °C ambient sometimes seen in server-rack-side UPS installations.
Empfohlen
Sensor-Less Motor Control (FOC for Fans and Pumps)
Sensorless BLDC pumps and HVAC fans use the MC56F8357VPYE to run back-EMF zero-crossing detection and sliding-mode observers at the same time as the current loop. The 56800E's single-cycle MAC executes Sliding-Mode-Observer math within 8 microseconds per PWM period, leaving bandwidth for speed-control and stall-detection state machines. The 76 I/O pins accommodate up to four independent fans in a single chip, and the CAN interface enables predictive-maintenance telemetry streams back to the building-management system. Designers select the MC56F8357VPYE rather than smaller Flash derivatives when the application firmware exceeds 128 KB, typical for sensorless-observer plus vibration-diagnostic code.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für MC56F8357VPYE – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | MC56F8357MPYE | MC56F8367VPYE | MC56F8347VPY60 | MC56F8347MPYE |
|---|---|---|---|---|---|
| Package | 160-pin LQFP (24x24) | 160-pin LQFP (24x24) - same | 160-pin LQFP (24x24) - same | 160-pin LQFP (24x24) - same | 160-pin LQFP (24x24) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | 56800E (16-bit DSC) | 56800E (16-bit DSC) | 56800E (16-bit DSC) | 56800E (16-bit DSC) | 56800E (16-bit DSC) |
| Maximum CPU Clock | 60 MHz | 60 MHz | 60 MHz | 60 MHz | 60 MHz |
| Program Flash | 256 KB (128K x 16) | 256 KB (128K x 16) | 512 KB (256K x 16) | 128 KB (64K x 16) | 128 KB (64K x 16) |
| ADC Channels x Resolution | 16 x 12-bit | 16 x 12-bit | 16 x 12-bit | 16 x 12-bit | 16 x 12-bit |
| Operating Voltage | 2.25 V to 3.6 V | 2.25 V to 3.6 V | 2.25 V to 3.6 V | 2.25 V to 3.6 V | 2.25 V to 3.6 V |
Wichtigste Unterscheidungsmerkmale
- Largest Flash in the 160-LQFP 56F83xx mid-range (vs. MC56F8347VPY60)
- Drop-in to 512 KB Flash on same footprint when firmware outgrows 256 KB (vs. MC56F8367VPYE)
- Industrial -40 to +105 °C temperature grade (vs. MC56F8357MPYE)
Designhinweise
The MC56F8357VPYE digital and analog sections each require their own 3.3 V rail decoupling: place a 0.1 µF X7R ceramic capacitor within 5 mm of every VDD/VSS pair, plus a bulk 10 µF tantalum or ceramic on the AVDD pin to suppress ADC reference noise. Use a ferrite bead between VDD and AVDD so the eFlexPWM switching transients do not couple into the ADC reference; otherwise ADC SNR and FOC current-loop measurement accuracy degrades significantly. According to NXP's recommended layout the MCU's internal voltage regulator requires a 4.7 µF external capacitor on VREGIN with < 20 mΩ ESR.
Route the external oscillator traces (XTAL/EXTAL) symmetrically and symmetrically short, with the load capacitors within 3 mm of the MCU pins and a grounded guard ring. Keep PWM output traces away from the 12-bit ADC analog inputs, especially the phase-current shunt amplifiers, because the dv/dt edge can couple 50-100 mV of switching noise into the analog front end and corrupt FOC feedback. Maintain a continuous ground plane under the MCU and avoid routing signal traces across the ground split beneath the device.
When using the 56800E JTAG port for in-circuit programming always provide a removable header or test pad array so production programming can be done without an expensive fixture. The TRST pin must be held low during power-up for clean JTAG initialization - a 10 kΩ pull-down plus 100 nF cap to ground implements a hardware reset on that pin. For high-noise motor environments consider NXP's COP watchdog reset to recover from runaway code rather than relying solely on JTAG.
Compliance-Informationen
The MC56F8357VPYE is a 56F83xx series industrial-grade part without AEC-Q100 automotive qualification. RoHS and REACH status was not present in the verified web data; manufacturers typically publish this on their product compliance pages. For automotive use, select AEC-Q100-qualified derivatives from the family. RoHS/REACH values marked 'unknown' were not found in the verified snippets.
