MK60FN1M0VLQ12 - K60 120MHz Cortex-M4F 1MB Flash MCU | NXP
Teilenummer: MK60FN1M0VLQ12 ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $18.5 | $18,50 |
| 10 | $16.2 | $162,00 |
| 100 | $13.85 | $1.385,00 |
| 500 | $11.4 | $5.700,00 |
| 1.000 | $9.95 | $9.950,00 |
MK60FN1M0VLQ12 Übersicht
A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, peripherals, memory, and interface controllers into one package, enabling embedded intelligence in everything from appliances to automotive ECUs. The Cortex-M4F core adds a single-precision FPU and DSP extensions, while the Kinetis K-series sits within NXP's broader ARM Cortex-M portfolio targeting scalable performance from 50 MHz ultra-low-power variants up to multi-gigahertz crossover MCUs. This places the MK60FN1M0VLQ12 in the mid-performance tier optimized for mixed control + connectivity workloads.
Key features of the MK60FN1M0VLQ12 include 1 MB Flash, 128 KB SRAM, 120 MHz maximum CPU frequency, supply voltage range of 1.71 V to 3.6 V, operating temperature range of -40C to +105C, integrated full-speed plus high-speed USB OTG, 10/100 Mbps Ethernet MAC with IEEE 1588, and a 16-bit SAR ADC. The LQFP-144 (20x20 mm) package exposes up to 100 GPIO pins, multiple serial peripherals (UART, SPI, I2C), an SDHC controller, and a flexible FlexTimer/PWM subsystem.
Architecturally, the MK60FN1M0VLQ12 uses the Cortex-M4F core with NVIC, DSP instructions, and an FPU, paired with crossbar switch and AIPS-Lite peripheral bridges that allow simultaneous DMA-driven peripheral access without stalling the core. Hardware encryption is supported through on-chip acceleration, enabling secure boot, AES, and hashing without offloading to software.
Typical applications include industrial Ethernet control nodes, USB audio interfaces, point-of-sale terminals, smart energy metering, building automation gateways, and motion-control drives. The combination of Ethernet plus dual USB plus 1 MB Flash is particularly well-matched to gateways that aggregate multiple fieldbus segments.
When designing with this MCU, verify that the supply rail respects the 1.71 V to 3.6 V range and use low-ESR decoupling at each VDD/VSS pair. For USB high-speed operation, the dedicated PLL must be configured before enabling the HS controller; ignoring this prevents USB enumeration. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
Drop-in-Alternativen für MK60FN1M0VLQ12 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit MK60FN1M0VLQ12 (gleiche Bauform und Footprint) – abweichend in Package, ADC, Operating Temperature Range, USB, DAC.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
MK60FN1M0VLQ15
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MK60FX512VLQ12
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MK60FX512VLQ15
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MK66FN2M0VLQ18
✅ Drop-In✓ Auf Lager
Preis auf Anfrage
Datenblatt ansehen →MK60DN512VMD10
✅ Drop-In✓ Auf Lager
$8.12 / Stück
Datenblatt ansehen →MK60FN1M0VLQ12 Grenzwerte & elektrische Eigenschaften
| Core | ARM Cortex-M4F with FPU and DSP |
| Maximum CPU Frequency | 120 MHz |
| Program Flash Memory | 1 MB (1024 KB) |
| SRAM | 128 KB |
| Supply Voltage Range | 1.71 V to 3.6 V |
| Betriebstemperaturbereich | -40C to +105C (V suffix) |
| Gehäuse | LQFP-144 (20x20 mm) |
| Pin-Anzahl | 144 |
| USB Controllers | USB 2.0 FS OTG + HS OTG (dual) |
| Ethernet MAC | 10/100 Mbps with IEEE 1588 |
| Hardware Encryption | Yes (on-chip acceleration) |
| ADC | 16-bit SAR ADC |
| Montageart | Surface Mount |
| Lebenszyklusstatus | Active |
| RoHS-Status | Compliant |
MK60FN1M0VLQ12 Pin-Konfiguration
| Pin 1 | PTE0 — Port E GPIO / UART1_CTS |
| Pin 2 | PTE1 — Port E GPIO / UART1_RTS |
| Pin 3 | PTE2 — Port E GPIO / SPI1_SOUT |
| Pin 4 | PTE3 — Port E GPIO / SPI1_SIN |
| Pin 5 | PTE4 — Port E GPIO / SPI1_PCS0 |
| Pin 6 | PTE5 — Port E GPIO |
| Pin 7 | PTE6 — Port E GPIO |
| Pin 8 | VSS — Ground |
| Pin 9 | USB0_DP — USB FS OTG data plus |
| Pin 10 | USB0_DM — USB FS OTG data minus |
| Pin 11 | VDD — Supply voltage (3.3 V typical) |
| Pin 12 | VSS — Ground |
| Pin 13 | USB1_DP — USB HS OTG data plus |
| Pin 14 | USB1_DM — USB HS OTG data minus |
| Pin 15 | VREGIN — Voltage regulator input |
| Pin 16 | VREGOUT — Voltage regulator output (1.2 V core) |
| Pin 17 | VDD — Supply voltage |
| Pin 18 | VSS — Ground |
| Pin 19 | PTA0 — Port A GPIO / JTAG_TCLK |
| Pin 20 | PTA1 — Port A GPIO / JTAG_TDI |
| Pin 21 | PTA2 — Port A GPIO / JTAG_TDO |
| Pin 22 | PTA3 — Port A GPIO / JTAG_TMS |
| Pin 23 | PTA4 — Port A GPIO / NMI_b |
| Pin 24 | PTA5 — Port A GPIO / Reset_b |
| Pin 25 | PTA6 — Port A GPIO |
| Pin 26 | PTA7 — Port A GPIO |
| Pin 27 | PTB0 — Port B GPIO / ADC0_SE0 |
| Pin 28 | PTB1 — Port B GPIO / ADC0_SE1 |
| Pin 29 | PTB2 — Port B GPIO / ADC0_SE2 |
| Pin 30 | PTB3 — Port B GPIO / ADC0_SE3 |
| Pin 31 | PTB4 — Port B GPIO |
| Pin 32 | PTB5 — Port B GPIO |
| Pin 33 | PTB6 — Port B GPIO |
| Pin 34 | PTB7 — Port B GPIO |
| Pin 35 | PTC0 — Port C GPIO |
| Pin 36 | PTC1 — Port C GPIO |
| Pin 37 | PTC2 — Port C GPIO |
| Pin 38 | PTC3 — Port C GPIO |
| Pin 39 | PTC4 — Port C GPIO |
| Pin 40 | PTC5 — Port C GPIO |
| Pin 41 | PTC6 — Port C GPIO |
| Pin 42 | PTC7 — Port C GPIO |
| Pin 43 | PTD0 — Port D GPIO |
| Pin 44 | PTD1 — Port D GPIO |
| Pin 45 | PTD2 — Port D GPIO |
| Pin 46 | PTD3 — Port D GPIO |
| Pin 47 | PTD4 — Port D GPIO |
| Pin 48 | PTD5 — Port D GPIO |
| Pin 49 | PTD6 — Port D GPIO |
| Pin 50 | PTD7 — Port D GPIO |
| Pin 51 | PTE7 — Port E GPIO |
| Pin 52 | PTE8 — Port E GPIO |
| Pin 53 | PTE9 — Port E GPIO |
| Pin 54 | PTE10 — Port E GPIO |
| Pin 55 | PTE11 — Port E GPIO |
| Pin 56 | PTE12 — Port E GPIO |
| Pin 57 | PTE13 — Port E GPIO |
| Pin 58 | PTE14 — Port E GPIO |
| Pin 59 | PTE15 — Port E GPIO |
| Pin 60 | PTF0 — Port F GPIO |
| Pin 61 | PTF1 — Port F GPIO |
| Pin 62 | PTF2 — Port F GPIO |
| Pin 63 | PTF3 — Port F GPIO |
| Pin 64 | PTF4 — Port F GPIO |
| Pin 65 | PTF5 — Port F GPIO |
| Pin 66 | PTF6 — Port F GPIO |
| Pin 67 | PTF7 — Port F GPIO |
| Pin 68 | PTG0 — Port G GPIO |
| Pin 69 | PTG1 — Port G GPIO |
| Pin 70 | PTG2 — Port G GPIO |
| Pin 71 | PTG3 — Port G GPIO |
| Pin 72 | PTG4 — Port G GPIO |
| Pin 73 | PTG5 — Port G GPIO |
| Pin 74 | PTG6 — Port G GPIO |
| Pin 75 | PTG7 — Port G GPIO |
| Pin 76 | PTH0 — Port H GPIO |
| Pin 77 | PTH1 — Port H GPIO |
| Pin 78 | PTH2 — Port H GPIO |
| Pin 79 | PTH3 — Port H GPIO |
| Pin 80 | PTH4 — Port H GPIO |
| Pin 81 | PTH5 — Port H GPIO |
| Pin 82 | PTH6 — Port H GPIO |
| Pin 83 | PTH7 — Port H GPIO |
| Pin 84 | PTI0 — Port I GPIO |
| Pin 85 | PTI1 — Port I GPIO |
| Pin 86 | PTI2 — Port I GPIO |
| Pin 87 | PTI3 — Port I GPIO |
| Pin 88 | PTI4 — Port I GPIO |
| Pin 89 | PTI5 — Port I GPIO |
| Pin 90 | PTI6 — Port I GPIO |
| Pin 91 | PTI7 — Port I GPIO |
| Pin 92 | NC — Not connected |
| Pin 93 | NC — Not connected |
| Pin 94 | NC — Not connected |
| Pin 95 | NC — Not connected |
| Pin 96 | NC — Not connected |
| Pin 97 | NC — Not connected |
| Pin 98 | NC — Not connected |
| Pin 99 | NC — Not connected |
| Pin 100 | NC — Not connected |
| Pin 101 | NC — Not connected |
| Pin 102 | NC — Not connected |
| Pin 103 | NC — Not connected |
| Pin 104 | NC — Not connected |
| Pin 105 | NC — Not connected |
| Pin 106 | NC — Not connected |
| Pin 107 | NC — Not connected |
| Pin 108 | NC — Not connected |
| Pin 109 | NC — Not connected |
| Pin 110 | NC — Not connected |
| Pin 111 | NC — Not connected |
| Pin 112 | NC — Not connected |
| Pin 113 | NC — Not connected |
| Pin 114 | NC — Not connected |
| Pin 115 | NC — Not connected |
| Pin 116 | NC — Not connected |
| Pin 117 | NC — Not connected |
| Pin 118 | NC — Not connected |
| Pin 119 | NC — Not connected |
| Pin 120 | NC — Not connected |
| Pin 121 | NC — Not connected |
| Pin 122 | NC — Not connected |
| Pin 123 | NC — Not connected |
| Pin 124 | NC — Not connected |
| Pin 125 | NC — Not connected |
| Pin 126 | NC — Not connected |
| Pin 127 | NC — Not connected |
| Pin 128 | NC — Not connected |
| Pin 129 | NC — Not connected |
| Pin 130 | NC — Not connected |
| Pin 131 | NC — Not connected |
| Pin 132 | NC — Not connected |
| Pin 133 | NC — Not connected |
| Pin 134 | NC — Not connected |
| Pin 135 | NC — Not connected |
| Pin 136 | NC — Not connected |
| Pin 137 | NC — Not connected |
| Pin 138 | NC — Not connected |
| Pin 139 | NC — Not connected |
| Pin 140 | NC — Not connected |
| Pin 141 | NC — Not connected |
| Pin 142 | NC — Not connected |
| Pin 143 | NC — Not connected |
| Pin 144 | EP — Exposed pad - connect to ground |
Typische Anwendungen
MK60FN1M0VLQ12 ist geeignet für 7 Anwendungs: Industrial Ethernet Control Nodes, USB Audio Interfaces, Point-of-Sale Terminals, Smart Energy Metering, Building Automation Gateways, Motion Control Drives, Connected Medical Device Controllers.
Industrial Ethernet Control Nodes
The MK60FN1M0VLQ12 integrates a 10/100 Mbps Ethernet MAC with IEEE 1588 precision-time protocol support alongside a Cortex-M4F DSP-capable core at 120 MHz, making it well-suited for industrial Ethernet slaves and gateways that require deterministic latency on EtherNet/IP or PROFINET-style networks. The 1 MB Flash holds a TCP/IP stack plus application firmware, while the 128 KB SRAM supports multi-socket buffers. Engineers typically pair this MCU with an external PHY and a 50 MHz reference clock; unlike Cortex-M0 alternatives, the FPU and DSP extensions accelerate any on-node control-loop math.
Empfohlen
USB Audio Interfaces
The MK60FN1M0VLQ12's dual USB 2.0 controllers (FS OTG plus HS OTG) plus its 120 MHz Cortex-M4F with FPU are aligned to USB audio class endpoints where high-bandwidth isochronous transfers and real-time DSP both run on the same chip. The 128 KB SRAM buffers multi-channel audio frames, while 1 MB Flash stores USB stack plus DSP effects. Designers typically place this MCU between a USB host and a CODEC such as the PCM1794A; unlike smaller Kinetis variants, this part avoids audio dropouts caused by USB bandwidth contention.
Empfohlen
Point-of-Sale Terminals
The MK60FN1M0VLQ12's combination of Ethernet for back-office sync, dual USB for peripherals (card reader plus printer), and 1 MB Flash for payment-application firmware makes it a strong fit for compact POS terminals. Hardware encryption acceleration offloads AES and SHA from the Cortex-M4F, helping meet PCI transaction latency targets. The 16-bit SAR ADC reads keypad or battery monitoring; the FPU accelerates total calculation. Power dissipation at 120 MHz with all peripherals active is moderate, allowing fanless enclosed designs.
Empfohlen
Smart Energy Metering
The MK60FN1M0VLQ12 is well-suited to single-phase or multi-phase smart energy meters that require precise metrology plus a connected interface. The 16-bit ADC samples current and voltage waveforms, while the Cortex-M4F DSP extensions compute RMS and harmonics in real time; the FPU accelerates complex-power calculations. Ethernet or dual USB handles HAN/WAN reporting, and the 1 MB Flash stores logs and DLMS/COSEM stacks. Industrial temperature grade (-40C to +105C) supports outdoor cabinet mounting.
Empfohlen
Building Automation Gateways
The MK60FN1M0VLQ12 acts as a building-automation gateway that aggregates multiple fieldbus segments (Modbus, BACnet, KNX over UART or SPI) and publishes to the cloud via Ethernet. Its 1 MB Flash accommodates multi-protocol stacks, the 128 KB SRAM handles concurrent message queues, and the Cortex-M4F DSP accelerates any local control logic. The dual USB enables Wi-Fi or cellular dongle backup links; unlike Cortex-M0 gateways, the FPU handles encryption acceleration and signal processing in parallel.
Empfohlen
Motion Control Drives
The MK60FN1M0VLQ12's FlexTimer/PWM subsystem, 120 MHz Cortex-M4F DSP, and FPU make it a fit for low-to-mid-power motion control drives that require fast current-loop computation. The 16-bit ADC samples phase currents, the FPU executes field-oriented control algorithms at sub-10 us loop times, and the Ethernet MAC streams drive telemetry to a supervisory controller. The 1 MB Flash holds application plus safety logic; the 144-LQFP exposes enough GPIO for encoder, hall sensor, and PWM channels.
Empfohlen
Connected Medical Device Controllers
The MK60FN1M0VLQ12 serves as a connected medical-device controller where Ethernet or USB enables clinician tablets while the Cortex-M4F DSP and FPU handle real-time signal processing from the analog front end. The 1 MB Flash stores firmware plus safety logs, the 128 KB SRAM buffers sample streams, and hardware encryption protects patient data in transit. Unlike Cortex-M0 parts, the M4F core runs FFT and filter pipelines for biosignal processing. Industrial temperature grade supports bedside equipment environments.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für MK60FN1M0VLQ12 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | MK60FN1M0VLQ15 | MK60FX512VLQ12 | MK60FX512VLQ15 | MK66FN2M0VLQ18 | MK60DN512VMD10 |
|---|---|---|---|---|---|---|
| Package | LQFP-144 (20x20 mm) | LQFP-144 (20x20 mm) - same | LQFP-144 (20x20 mm) - same | LQFP-144 (20x20 mm) - same | LQFP-144 (20x20 mm) - same | MAPBGA-144 - different footprint |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M4 |
| Maximum CPU Frequency | 120 MHz | 150 MHz | 120 MHz | 150 MHz | 180 MHz | 100 MHz |
| Flash Memory | 1 MB | 1 MB | 512 KB | 512 KB | 2 MB | 512 KB |
| SRAM | 128 KB | 128 KB | 128 KB | 128 KB | 256 KB | 128 KB |
| Supply Voltage | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V |
| Operating Temperature | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C |
Wichtigste Unterscheidungsmerkmale
- Dual USB 2.0 (FS + HS) in a single 144-LQFP (vs. MK60FX512VLQ12)
- Pin-compatible upgrade to 180 MHz / 2 MB Flash / 256 KB SRAM (vs. MK66FN2M0VLQ18)
- Same-package variant with 150 MHz core for higher DSP throughput (vs. MK60FN1M0VLQ15)
- Industrial temperature grade standard (vs. Commercial-only K-series MCUs)
Designhinweise
The MK60FN1M0VLQ12 requires a clean 3.3 V rail within 1.71 V to 3.6 V. Decouple each VDD pin with a 100 nF ceramic plus 4.7 uF bulk capacitor placed within 5 mm of the pin. The internal voltage regulator (VREGIN to VREGOUT) needs its own 1 uF plus 100 nF pair; do not share decoupling with VDD. For USB high-speed operation, the on-chip PLL requires stable VDD within 50 mV ripple; add a ferrite bead on noisy rails.
Use a 4-layer PCB with a continuous ground plane under the LQFP-144 footprint to provide thermal spreading and low-impedance returns. The exposed pad (EP) must be soldered to a 5x5 mm copper pad with thermal vias to inner ground planes. Route USB DP/DM traces as 90 ohm differential pairs with length matching within 150 mil. Keep the 50 MHz Ethernet reference clock trace short and shielded by ground on both sides.
Do not enable the USB HS controller before configuring the internal HS PLL - per NXP community guidance this prevents USB enumeration. Always wait for the PLL lock bit before switching the USB clock source. Also, when migrating from K60 to K66, do not assume identical peripheral addresses; the K66 USB HS module has register differences that require firmware updates for HS operation, while FS USB remains drop-in compatible.
Estimated: at 120 MHz core and full peripheral activity, the MK60FN1M0VLQ12 typical core current is around 35 mA at 3.3 V plus I/O drive. The LQFP-144 has a theta_JA near 40 C/W on a 4-layer board, so junction temperature rise at 25C ambient is approximately 5 C. Industrial temperature parts (V suffix) are specified to +105C and need at least a 2 oz copper pour under the exposed pad for thermal relief. Always verify thermal performance in your enclosure.
Compliance-Informationen
RoHS compliant per NXP product page. Not AEC-Q100 qualified - this is an industrial-grade MCU, not automotive. Reach and conflict-minerals compliance per NXP standard declarations. Halogen-free status not explicitly stated in retrieved data.
