MK60FN1M0VLQ12 - K60 120MHz Cortex-M4F 1MB Flash MCU | NXP
N.º da peça: MK60FN1M0VLQ12 ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $18.5 | $18,50 |
| 10 | $16.2 | $162,00 |
| 100 | $13.85 | $1.385,00 |
| 500 | $11.4 | $5.700,00 |
| 1.000 | $9.95 | $9.950,00 |
MK60FN1M0VLQ12 Visão geral
A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, peripherals, memory, and interface controllers into one package, enabling embedded intelligence in everything from appliances to automotive ECUs. The Cortex-M4F core adds a single-precision FPU and DSP extensions, while the Kinetis K-series sits within NXP's broader ARM Cortex-M portfolio targeting scalable performance from 50 MHz ultra-low-power variants up to multi-gigahertz crossover MCUs. This places the MK60FN1M0VLQ12 in the mid-performance tier optimized for mixed control + connectivity workloads.
Key features of the MK60FN1M0VLQ12 include 1 MB Flash, 128 KB SRAM, 120 MHz maximum CPU frequency, supply voltage range of 1.71 V to 3.6 V, operating temperature range of -40C to +105C, integrated full-speed plus high-speed USB OTG, 10/100 Mbps Ethernet MAC with IEEE 1588, and a 16-bit SAR ADC. The LQFP-144 (20x20 mm) package exposes up to 100 GPIO pins, multiple serial peripherals (UART, SPI, I2C), an SDHC controller, and a flexible FlexTimer/PWM subsystem.
Architecturally, the MK60FN1M0VLQ12 uses the Cortex-M4F core with NVIC, DSP instructions, and an FPU, paired with crossbar switch and AIPS-Lite peripheral bridges that allow simultaneous DMA-driven peripheral access without stalling the core. Hardware encryption is supported through on-chip acceleration, enabling secure boot, AES, and hashing without offloading to software.
Typical applications include industrial Ethernet control nodes, USB audio interfaces, point-of-sale terminals, smart energy metering, building automation gateways, and motion-control drives. The combination of Ethernet plus dual USB plus 1 MB Flash is particularly well-matched to gateways that aggregate multiple fieldbus segments.
When designing with this MCU, verify that the supply rail respects the 1.71 V to 3.6 V range and use low-ESR decoupling at each VDD/VSS pair. For USB high-speed operation, the dedicated PLL must be configured before enabling the HS controller; ignoring this prevents USB enumeration. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
Alternativas drop-in para MK60FN1M0VLQ12 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com MK60FN1M0VLQ12 (mesmo formato e footprint) — diferindo em Package, ADC, Operating Temperature Range, USB, DAC.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
MK60FN1M0VLQ15
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MK60FX512VLQ12
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MK60FX512VLQ15
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MK66FN2M0VLQ18
✅ Drop-In✓ Em estoque
Consulte o preço
Ver ficha técnica →MK60DN512VMD10
✅ Drop-In✓ Em estoque
$8.12 / unidade
Ver ficha técnica →MK60FN1M0VLQ12 Classificações máximas e características elétricas
| Core | ARM Cortex-M4F with FPU and DSP |
| Maximum CPU Frequency | 120 MHz |
| Program Flash Memory | 1 MB (1024 KB) |
| SRAM | 128 KB |
| Supply Voltage Range | 1.71 V to 3.6 V |
| Faixa de temperatura de operação | -40C to +105C (V suffix) |
| Encapsulamento | LQFP-144 (20x20 mm) |
| Contagem de pinos | 144 |
| USB Controllers | USB 2.0 FS OTG + HS OTG (dual) |
| Ethernet MAC | 10/100 Mbps with IEEE 1588 |
| Hardware Encryption | Yes (on-chip acceleration) |
| ADC | 16-bit SAR ADC |
| Tipo de montagem | Surface Mount |
| Status do ciclo de vida | Active |
| Status RoHS | Compliant |
Configuração de pinos do MK60FN1M0VLQ12
| Pino 1 | PTE0 — Port E GPIO / UART1_CTS |
| Pino 2 | PTE1 — Port E GPIO / UART1_RTS |
| Pino 3 | PTE2 — Port E GPIO / SPI1_SOUT |
| Pino 4 | PTE3 — Port E GPIO / SPI1_SIN |
| Pino 5 | PTE4 — Port E GPIO / SPI1_PCS0 |
| Pino 6 | PTE5 — Port E GPIO |
| Pino 7 | PTE6 — Port E GPIO |
| Pino 8 | VSS — Ground |
| Pino 9 | USB0_DP — USB FS OTG data plus |
| Pino 10 | USB0_DM — USB FS OTG data minus |
| Pino 11 | VDD — Supply voltage (3.3 V typical) |
| Pino 12 | VSS — Ground |
| Pino 13 | USB1_DP — USB HS OTG data plus |
| Pino 14 | USB1_DM — USB HS OTG data minus |
| Pino 15 | VREGIN — Voltage regulator input |
| Pino 16 | VREGOUT — Voltage regulator output (1.2 V core) |
| Pino 17 | VDD — Supply voltage |
| Pino 18 | VSS — Ground |
| Pino 19 | PTA0 — Port A GPIO / JTAG_TCLK |
| Pino 20 | PTA1 — Port A GPIO / JTAG_TDI |
| Pino 21 | PTA2 — Port A GPIO / JTAG_TDO |
| Pino 22 | PTA3 — Port A GPIO / JTAG_TMS |
| Pino 23 | PTA4 — Port A GPIO / NMI_b |
| Pino 24 | PTA5 — Port A GPIO / Reset_b |
| Pino 25 | PTA6 — Port A GPIO |
| Pino 26 | PTA7 — Port A GPIO |
| Pino 27 | PTB0 — Port B GPIO / ADC0_SE0 |
| Pino 28 | PTB1 — Port B GPIO / ADC0_SE1 |
| Pino 29 | PTB2 — Port B GPIO / ADC0_SE2 |
| Pino 30 | PTB3 — Port B GPIO / ADC0_SE3 |
| Pino 31 | PTB4 — Port B GPIO |
| Pino 32 | PTB5 — Port B GPIO |
| Pino 33 | PTB6 — Port B GPIO |
| Pino 34 | PTB7 — Port B GPIO |
| Pino 35 | PTC0 — Port C GPIO |
| Pino 36 | PTC1 — Port C GPIO |
| Pino 37 | PTC2 — Port C GPIO |
| Pino 38 | PTC3 — Port C GPIO |
| Pino 39 | PTC4 — Port C GPIO |
| Pino 40 | PTC5 — Port C GPIO |
| Pino 41 | PTC6 — Port C GPIO |
| Pino 42 | PTC7 — Port C GPIO |
| Pino 43 | PTD0 — Port D GPIO |
| Pino 44 | PTD1 — Port D GPIO |
| Pino 45 | PTD2 — Port D GPIO |
| Pino 46 | PTD3 — Port D GPIO |
| Pino 47 | PTD4 — Port D GPIO |
| Pino 48 | PTD5 — Port D GPIO |
| Pino 49 | PTD6 — Port D GPIO |
| Pino 50 | PTD7 — Port D GPIO |
| Pino 51 | PTE7 — Port E GPIO |
| Pino 52 | PTE8 — Port E GPIO |
| Pino 53 | PTE9 — Port E GPIO |
| Pino 54 | PTE10 — Port E GPIO |
| Pino 55 | PTE11 — Port E GPIO |
| Pino 56 | PTE12 — Port E GPIO |
| Pino 57 | PTE13 — Port E GPIO |
| Pino 58 | PTE14 — Port E GPIO |
| Pino 59 | PTE15 — Port E GPIO |
| Pino 60 | PTF0 — Port F GPIO |
| Pino 61 | PTF1 — Port F GPIO |
| Pino 62 | PTF2 — Port F GPIO |
| Pino 63 | PTF3 — Port F GPIO |
| Pino 64 | PTF4 — Port F GPIO |
| Pino 65 | PTF5 — Port F GPIO |
| Pino 66 | PTF6 — Port F GPIO |
| Pino 67 | PTF7 — Port F GPIO |
| Pino 68 | PTG0 — Port G GPIO |
| Pino 69 | PTG1 — Port G GPIO |
| Pino 70 | PTG2 — Port G GPIO |
| Pino 71 | PTG3 — Port G GPIO |
| Pino 72 | PTG4 — Port G GPIO |
| Pino 73 | PTG5 — Port G GPIO |
| Pino 74 | PTG6 — Port G GPIO |
| Pino 75 | PTG7 — Port G GPIO |
| Pino 76 | PTH0 — Port H GPIO |
| Pino 77 | PTH1 — Port H GPIO |
| Pino 78 | PTH2 — Port H GPIO |
| Pino 79 | PTH3 — Port H GPIO |
| Pino 80 | PTH4 — Port H GPIO |
| Pino 81 | PTH5 — Port H GPIO |
| Pino 82 | PTH6 — Port H GPIO |
| Pino 83 | PTH7 — Port H GPIO |
| Pino 84 | PTI0 — Port I GPIO |
| Pino 85 | PTI1 — Port I GPIO |
| Pino 86 | PTI2 — Port I GPIO |
| Pino 87 | PTI3 — Port I GPIO |
| Pino 88 | PTI4 — Port I GPIO |
| Pino 89 | PTI5 — Port I GPIO |
| Pino 90 | PTI6 — Port I GPIO |
| Pino 91 | PTI7 — Port I GPIO |
| Pino 92 | NC — Not connected |
| Pino 93 | NC — Not connected |
| Pino 94 | NC — Not connected |
| Pino 95 | NC — Not connected |
| Pino 96 | NC — Not connected |
| Pino 97 | NC — Not connected |
| Pino 98 | NC — Not connected |
| Pino 99 | NC — Not connected |
| Pino 100 | NC — Not connected |
| Pino 101 | NC — Not connected |
| Pino 102 | NC — Not connected |
| Pino 103 | NC — Not connected |
| Pino 104 | NC — Not connected |
| Pino 105 | NC — Not connected |
| Pino 106 | NC — Not connected |
| Pino 107 | NC — Not connected |
| Pino 108 | NC — Not connected |
| Pino 109 | NC — Not connected |
| Pino 110 | NC — Not connected |
| Pino 111 | NC — Not connected |
| Pino 112 | NC — Not connected |
| Pino 113 | NC — Not connected |
| Pino 114 | NC — Not connected |
| Pino 115 | NC — Not connected |
| Pino 116 | NC — Not connected |
| Pino 117 | NC — Not connected |
| Pino 118 | NC — Not connected |
| Pino 119 | NC — Not connected |
| Pino 120 | NC — Not connected |
| Pino 121 | NC — Not connected |
| Pino 122 | NC — Not connected |
| Pino 123 | NC — Not connected |
| Pino 124 | NC — Not connected |
| Pino 125 | NC — Not connected |
| Pino 126 | NC — Not connected |
| Pino 127 | NC — Not connected |
| Pino 128 | NC — Not connected |
| Pino 129 | NC — Not connected |
| Pino 130 | NC — Not connected |
| Pino 131 | NC — Not connected |
| Pino 132 | NC — Not connected |
| Pino 133 | NC — Not connected |
| Pino 134 | NC — Not connected |
| Pino 135 | NC — Not connected |
| Pino 136 | NC — Not connected |
| Pino 137 | NC — Not connected |
| Pino 138 | NC — Not connected |
| Pino 139 | NC — Not connected |
| Pino 140 | NC — Not connected |
| Pino 141 | NC — Not connected |
| Pino 142 | NC — Not connected |
| Pino 143 | NC — Not connected |
| Pino 144 | EP — Exposed pad - connect to ground |
Aplicações típicas
MK60FN1M0VLQ12 é adequado para 7 aplicaçãos: Industrial Ethernet Control Nodes, USB Audio Interfaces, Point-of-Sale Terminals, Smart Energy Metering, Building Automation Gateways, Motion Control Drives, Connected Medical Device Controllers.
Industrial Ethernet Control Nodes
The MK60FN1M0VLQ12 integrates a 10/100 Mbps Ethernet MAC with IEEE 1588 precision-time protocol support alongside a Cortex-M4F DSP-capable core at 120 MHz, making it well-suited for industrial Ethernet slaves and gateways that require deterministic latency on EtherNet/IP or PROFINET-style networks. The 1 MB Flash holds a TCP/IP stack plus application firmware, while the 128 KB SRAM supports multi-socket buffers. Engineers typically pair this MCU with an external PHY and a 50 MHz reference clock; unlike Cortex-M0 alternatives, the FPU and DSP extensions accelerate any on-node control-loop math.
Recomendado
USB Audio Interfaces
The MK60FN1M0VLQ12's dual USB 2.0 controllers (FS OTG plus HS OTG) plus its 120 MHz Cortex-M4F with FPU are aligned to USB audio class endpoints where high-bandwidth isochronous transfers and real-time DSP both run on the same chip. The 128 KB SRAM buffers multi-channel audio frames, while 1 MB Flash stores USB stack plus DSP effects. Designers typically place this MCU between a USB host and a CODEC such as the PCM1794A; unlike smaller Kinetis variants, this part avoids audio dropouts caused by USB bandwidth contention.
Recomendado
Point-of-Sale Terminals
The MK60FN1M0VLQ12's combination of Ethernet for back-office sync, dual USB for peripherals (card reader plus printer), and 1 MB Flash for payment-application firmware makes it a strong fit for compact POS terminals. Hardware encryption acceleration offloads AES and SHA from the Cortex-M4F, helping meet PCI transaction latency targets. The 16-bit SAR ADC reads keypad or battery monitoring; the FPU accelerates total calculation. Power dissipation at 120 MHz with all peripherals active is moderate, allowing fanless enclosed designs.
Recomendado
Smart Energy Metering
The MK60FN1M0VLQ12 is well-suited to single-phase or multi-phase smart energy meters that require precise metrology plus a connected interface. The 16-bit ADC samples current and voltage waveforms, while the Cortex-M4F DSP extensions compute RMS and harmonics in real time; the FPU accelerates complex-power calculations. Ethernet or dual USB handles HAN/WAN reporting, and the 1 MB Flash stores logs and DLMS/COSEM stacks. Industrial temperature grade (-40C to +105C) supports outdoor cabinet mounting.
Recomendado
Building Automation Gateways
The MK60FN1M0VLQ12 acts as a building-automation gateway that aggregates multiple fieldbus segments (Modbus, BACnet, KNX over UART or SPI) and publishes to the cloud via Ethernet. Its 1 MB Flash accommodates multi-protocol stacks, the 128 KB SRAM handles concurrent message queues, and the Cortex-M4F DSP accelerates any local control logic. The dual USB enables Wi-Fi or cellular dongle backup links; unlike Cortex-M0 gateways, the FPU handles encryption acceleration and signal processing in parallel.
Recomendado
Motion Control Drives
The MK60FN1M0VLQ12's FlexTimer/PWM subsystem, 120 MHz Cortex-M4F DSP, and FPU make it a fit for low-to-mid-power motion control drives that require fast current-loop computation. The 16-bit ADC samples phase currents, the FPU executes field-oriented control algorithms at sub-10 us loop times, and the Ethernet MAC streams drive telemetry to a supervisory controller. The 1 MB Flash holds application plus safety logic; the 144-LQFP exposes enough GPIO for encoder, hall sensor, and PWM channels.
Recomendado
Connected Medical Device Controllers
The MK60FN1M0VLQ12 serves as a connected medical-device controller where Ethernet or USB enables clinician tablets while the Cortex-M4F DSP and FPU handle real-time signal processing from the analog front end. The 1 MB Flash stores firmware plus safety logs, the 128 KB SRAM buffers sample streams, and hardware encryption protects patient data in transit. Unlike Cortex-M0 parts, the M4F core runs FFT and filter pipelines for biosignal processing. Industrial temperature grade supports bedside equipment environments.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MK60FN1M0VLQ12 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MK60FN1M0VLQ15 | MK60FX512VLQ12 | MK60FX512VLQ15 | MK66FN2M0VLQ18 | MK60DN512VMD10 |
|---|---|---|---|---|---|---|
| Package | LQFP-144 (20x20 mm) | LQFP-144 (20x20 mm) - same | LQFP-144 (20x20 mm) - same | LQFP-144 (20x20 mm) - same | LQFP-144 (20x20 mm) - same | MAPBGA-144 - different footprint |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M4 |
| Maximum CPU Frequency | 120 MHz | 150 MHz | 120 MHz | 150 MHz | 180 MHz | 100 MHz |
| Flash Memory | 1 MB | 1 MB | 512 KB | 512 KB | 2 MB | 512 KB |
| SRAM | 128 KB | 128 KB | 128 KB | 128 KB | 256 KB | 128 KB |
| Supply Voltage | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V |
| Operating Temperature | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C |
Principais diferenciais
- Dual USB 2.0 (FS + HS) in a single 144-LQFP (vs MK60FX512VLQ12)
- Pin-compatible upgrade to 180 MHz / 2 MB Flash / 256 KB SRAM (vs MK66FN2M0VLQ18)
- Same-package variant with 150 MHz core for higher DSP throughput (vs MK60FN1M0VLQ15)
- Industrial temperature grade standard (vs Commercial-only K-series MCUs)
Notas de projeto
The MK60FN1M0VLQ12 requires a clean 3.3 V rail within 1.71 V to 3.6 V. Decouple each VDD pin with a 100 nF ceramic plus 4.7 uF bulk capacitor placed within 5 mm of the pin. The internal voltage regulator (VREGIN to VREGOUT) needs its own 1 uF plus 100 nF pair; do not share decoupling with VDD. For USB high-speed operation, the on-chip PLL requires stable VDD within 50 mV ripple; add a ferrite bead on noisy rails.
Use a 4-layer PCB with a continuous ground plane under the LQFP-144 footprint to provide thermal spreading and low-impedance returns. The exposed pad (EP) must be soldered to a 5x5 mm copper pad with thermal vias to inner ground planes. Route USB DP/DM traces as 90 ohm differential pairs with length matching within 150 mil. Keep the 50 MHz Ethernet reference clock trace short and shielded by ground on both sides.
Do not enable the USB HS controller before configuring the internal HS PLL - per NXP community guidance this prevents USB enumeration. Always wait for the PLL lock bit before switching the USB clock source. Also, when migrating from K60 to K66, do not assume identical peripheral addresses; the K66 USB HS module has register differences that require firmware updates for HS operation, while FS USB remains drop-in compatible.
Estimated: at 120 MHz core and full peripheral activity, the MK60FN1M0VLQ12 typical core current is around 35 mA at 3.3 V plus I/O drive. The LQFP-144 has a theta_JA near 40 C/W on a 4-layer board, so junction temperature rise at 25C ambient is approximately 5 C. Industrial temperature parts (V suffix) are specified to +105C and need at least a 2 oz copper pour under the exposed pad for thermal relief. Always verify thermal performance in your enclosure.
Informações de conformidade
RoHS compliant per NXP product page. Not AEC-Q100 qualified - this is an industrial-grade MCU, not automotive. Reach and conflict-minerals compliance per NXP standard declarations. Halogen-free status not explicitly stated in retrieved data.
