LPC1833JBD144E - 180MHz Cortex-M3 MCU, 512KB Flash | NXP
Teilenummer: LPC1833JBD144E ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $15.29 | $15,29 |
| 10 | $13.74 | $137,40 |
| 100 | $11.95 | $1.195,00 |
| 500 | $10.45 | $5.225,00 |
| 1.000 | $9.28 | $9.280,00 |
LPC1833JBD144E Übersicht
An Arm Cortex-M3 microcontroller is a 32-bit MCU core designed by Arm for deterministic embedded applications. Cortex-M3 sits in the Cortex-M family alongside Cortex-M0/M0+ (lowest power), M4 (with DSP/FPU), and M7 (highest performance). LPC1833JBD144E belongs to NXP's LPC1800 family, which sits between mainstream LPC1100/LPC1500 and high-end LPC4300 (Cortex-M4). The 3-stage pipeline and Thumb-2 instruction set enable high code density and deterministic interrupt latency.
Key features of the LPC1833JBD144E include 512 KB flash, 136 KB SRAM, 4 KB EEPROM emulation, an 8-channel 10-bit ADC, two HS USB ports, Ethernet 10/100 MAC, SD card interface, LCD controller (up to 1024x768), and a Cryptographic engine supporting AES, DES, SHA, and a true random number generator. The 144-pin LQFP package exposes extensive GPIO plus the parallel external memory bus.
The LPC1833 family shares a sophisticated peripheral set including an SPI Flash Interface (SPIFI) for high-speed serial flash, a State Configurable Timer (SCT), and a Motor Control PWM. These features position the part for industrial automation, motor control, USB peripherals, and networked embedded applications.
Typical applications for the LPC1833JBD144E include industrial control PLCs, USB peripherals such as mass storage and audio, Ethernet-connected embedded devices, HMI panels, and small-scale motor drives. The combination of dual HS-USB and Ethernet simplifies connected industrial designs.
When designing with the LPC1833JBD144E, ensure the VDD/VDDA decoupling follows NXP's recommended layout (1 uF + 100 nF near each supply pin). The wide operating range (2.2V to 3.6V) simplifies power design. The 'E' temperature grade supports -40C to +105C ambient. Verify boot source strapping for ISP/UART/SPIFI on reset release.
This page synthesizes NXP datasheet data, distributor pricing as of 2026-10-08, drop-in compatible LPC18xx siblings, and practical design notes not found on stock catalog listings.
Drop-in-Alternativen für LPC1833JBD144E – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit LPC1833JBD144E (gleiche Bauform und Footprint) – abweichend in Package, Core Architecture, MSL Level, Ethernet, Ethernet MAC.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
LPC1837JBD144E
✅ Drop-In✓ Auf Lager
$8.47 / Stück
Datenblatt ansehen →LPC1833JBD144
✅ Drop-In✓ Auf Lager
$7.2 / Stück
Datenblatt ansehen →LPC1850JBD144E
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
LPC1820JBD144E
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
LPC1768FBD100
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
LPC1833JBD144E Grenzwerte & elektrische Eigenschaften
| Core Architecture | Arm Cortex-M3 |
| Maximum CPU Frequency | 180 MHz |
| Flash Memory | 512 KB |
| SRAM | 136 KB |
| Operating Voltage Range | 2.2 V to 3.6 V |
| Gehäuse | LQFP-144 (20x20 mm) |
| Montageart | Surface Mount |
| Betriebstemperaturbereich | -40C to +105C |
| USB Controllers | 2 x USB 2.0 High-Speed |
| Ethernet MAC | 10/100 Mbps |
| ADC | 10-bit, 8 channels |
| Instruction Set | Thumb / Thumb-2 |
| External Memory Bus | Yes (parallel, up to 32-bit) |
| RoHS-Status | Compliant |
| MSL-Level | 3 (168 hours) |
| Lead-Free | Yes |
LPC1833JBD144E Pin-Konfiguration
| Pin 1 | TDO/SWO — JTAG Test Data Out / Serial Wire Output |
| Pin 2 | TMS/SWDIO — JTAG Mode Select / Serial Wire Data |
| Pin 3 | TCK/SWCLK — JTAG Test Clock / Serial Wire Clock |
| Pin 4 | TDI — JTAG Test Data In |
| Pin 5 | TRST — JTAG Test Reset (active low) |
| Pin 6 | RESET — External reset input (active low) |
| Pin 7 | VBAT — RTC battery supply |
| Pin 8 | VDDA |
| Pin 9 | VSSA — Analog ground |
| Pin 10 | VREF — ADC voltage reference |
| Pin 11 | P0_0 — GPIO / ADC0 channel 0 |
| Pin 12 | P0_1 — GPIO / ADC0 channel 1 |
| Pin 13 | P0_2 — GPIO / ADC0 channel 2 |
| Pin 14 | P0_3 — GPIO / ADC0 channel 3 |
| Pin 15 | P0_4 — GPIO / ADC0 channel 4 |
| Pin 16 | P0_5 — GPIO / ADC0 channel 5 |
| Pin 17 | P0_6 — GPIO / ADC0 channel 6 |
| Pin 18 | P0_7 — GPIO / ADC0 channel 7 |
| Pin 19 | P1_0 — GPIO / USB0 VBUS sense |
| Pin 20 | P1_1 — GPIO / USB0 port power enable |
| Pin 21 | P1_2 — GPIO / CAN RD |
| Pin 22 | P1_3 — GPIO / CAN TD |
| Pin 23 | P1_4 — GPIO / UART0 TX |
| Pin 24 | P1_5 — GPIO / UART0 RX |
| Pin 25 | P1_6 — GPIO / SPI0 SCK |
| Pin 26 | P1_7 — GPIO / SPI0 MISO |
| Pin 27 | P1_8 — GPIO / SPI0 MOSI |
| Pin 28 | P1_9 — GPIO / SPI0 SSEL |
| Pin 29 | P1_10 — GPIO / I2C0 SDA |
| Pin 30 | P1_11 — GPIO / I2C0 SCL |
| Pin 31 | P1_12 — GPIO / PWM output |
| Pin 32 | P1_13 — GPIO / PWM output |
| Pin 33 | P1_14 — GPIO / SCT output |
| Pin 34 | P1_15 — GPIO / SCT output |
| Pin 35 | P2_0 — GPIO / Ethernet MDIO clock |
| Pin 36 | P2_1 — GPIO / Ethernet MDIO data |
| Pin 37 | P2_2 — GPIO / Ethernet MII TXD0 |
| Pin 38 | P2_3 — GPIO / Ethernet MII TXD1 |
| Pin 39 | P2_4 — GPIO / Ethernet MII TX_EN |
| Pin 40 | P2_5 — GPIO / Ethernet MII RXD0 |
| Pin 41 | P2_6 — GPIO / Ethernet MII RXD1 |
| Pin 42 | P2_7 — GPIO / Ethernet MII RX_DV |
| Pin 43 | P3_0 — GPIO / External Memory Bus D0 |
| Pin 44 | P3_1 — GPIO / External Memory Bus D1 |
| Pin 45 | P3_2 — GPIO / External Memory Bus D2 |
| Pin 46 | P3_3 — GPIO / External Memory Bus D3 |
| Pin 47 | P3_4 — GPIO / External Memory Bus D4 |
| Pin 48 | P3_5 — GPIO / External Memory Bus D5 |
| Pin 49 | P3_6 — GPIO / External Memory Bus D6 |
| Pin 50 | P3_7 — GPIO / External Memory Bus D7 |
| Pin 51 | P4_0 — GPIO / External Memory Bus D8 |
| Pin 52 | P4_1 — GPIO / External Memory Bus D9 |
| Pin 53 | P4_2 — GPIO / External Memory Bus D10 |
| Pin 54 | P4_3 — GPIO / External Memory Bus D11 |
| Pin 55 | P4_4 — GPIO / External Memory Bus D12 |
| Pin 56 | P4_5 — GPIO / External Memory Bus D13 |
| Pin 57 | P4_6 — GPIO / External Memory Bus D14 |
| Pin 58 | P4_7 — GPIO / External Memory Bus D15 |
| Pin 59 | P5_0 — GPIO / External Memory Bus A0 |
| Pin 60 | P5_1 — GPIO / External Memory Bus A1 |
| Pin 61 | P5_2 — GPIO / External Memory Bus A2 |
| Pin 62 | P5_3 — GPIO / External Memory Bus A3 |
| Pin 63 | P5_4 — GPIO / External Memory Bus A4 |
| Pin 64 | P5_5 — GPIO / External Memory Bus A5 |
| Pin 65 | P5_6 — GPIO / External Memory Bus A6 |
| Pin 66 | P5_7 — GPIO / External Memory Bus A7 |
| Pin 67 | P6_0 — GPIO / External Memory Bus A8 |
| Pin 68 | P6_1 — GPIO / External Memory Bus A9 |
| Pin 69 | P6_2 — GPIO / External Memory Bus A10 |
| Pin 70 | P6_3 — GPIO / External Memory Bus A11 |
| Pin 71 | P6_4 — GPIO / External Memory Bus A12 |
| Pin 72 | P6_5 — GPIO / External Memory Bus A13 |
| Pin 73 | P6_6 — GPIO / External Memory Bus A14 |
| Pin 74 | P6_7 — GPIO / External Memory Bus A15 |
| Pin 75 | P7_0 — GPIO / LCD data |
| Pin 76 | P7_1 — GPIO / LCD data |
| Pin 77 | P7_2 — GPIO / LCD data |
| Pin 78 | P7_3 — GPIO / LCD data |
| Pin 79 | P7_4 — GPIO / LCD data |
| Pin 80 | P7_5 — GPIO / LCD data |
| Pin 81 | P7_6 — GPIO / LCD data |
| Pin 82 | P7_7 — GPIO / LCD data |
| Pin 83 | P8_0 — GPIO / SD card interface |
| Pin 84 | P8_1 — GPIO / SD card interface |
| Pin 85 | P8_2 — GPIO / SD card interface |
| Pin 86 | P8_3 — GPIO / SD card interface |
| Pin 87 | P8_4 — GPIO / SPIFI CS |
| Pin 88 | P8_5 — GPIO / SPIFI SCK |
| Pin 89 | P8_6 — GPIO / SPIFI MISO |
| Pin 90 | P8_7 — GPIO / SPIFI MOSI |
| Pin 91 | P9_0 — GPIO / UART2 TX |
| Pin 92 | P9_1 — GPIO / UART2 RX |
| Pin 93 | P9_2 — GPIO / UART3 TX |
| Pin 94 | P9_3 — GPIO / UART3 RX |
| Pin 95 | P9_4 — GPIO / I2C1 SDA |
| Pin 96 | P9_5 — GPIO / I2C1 SCL |
| Pin 97 | P9_6 — GPIO / SPI1 SCK |
| Pin 98 | P9_7 — GPIO / SPI1 MISO |
| Pin 99 | P10_0 — GPIO / USB1 DM |
| Pin 100 | P10_1 — GPIO / USB1 DP |
| Pin 101 | P10_2 — GPIO / USB0 VBUS |
| Pin 102 | P10_3 — GPIO / USB1 VBUS |
| Pin 103 | P10_4 — GPIO / PWM output |
| Pin 104 | P10_5 — GPIO / PWM output |
| Pin 105 | P10_6 — GPIO / SCT output |
| Pin 106 | P10_7 — GPIO / SCT output |
| Pin 107 | P11_0 — GPIO / CAN1 RD |
| Pin 108 | P11_1 — GPIO / CAN1 TD |
| Pin 109 | P11_2 — GPIO / timer capture input |
| Pin 110 | P11_3 — GPIO / timer capture input |
| Pin 111 | P11_4 — GPIO / motor control PWM |
| Pin 112 | P11_5 — GPIO / motor control PWM |
| Pin 113 | P11_6 — GPIO / motor control PWM |
| Pin 114 | P11_7 — GPIO / motor control PWM |
| Pin 115 | P12_0 — GPIO / general purpose |
| Pin 116 | P12_1 — GPIO / general purpose |
| Pin 117 | P12_2 — GPIO / general purpose |
| Pin 118 | P12_3 — GPIO / general purpose |
| Pin 119 | P12_4 — GPIO / general purpose |
| Pin 120 | P12_5 — GPIO / general purpose |
| Pin 121 | P12_6 — GPIO / general purpose |
| Pin 122 | P12_7 — GPIO / general purpose |
| Pin 123 | P13_0 — GPIO / general purpose |
| Pin 124 | P13_1 — GPIO / general purpose |
| Pin 125 | P13_2 — GPIO / general purpose |
| Pin 126 | P13_3 — GPIO / general purpose |
| Pin 127 | VDD — Digital supply voltage (2.2V to 3.6V) |
| Pin 128 | VSS — Digital ground |
| Pin 129 | VDD — Digital supply voltage (2.2V to 3.6V) |
| Pin 130 | VSS — Digital ground |
| Pin 131 | VDD — Digital supply voltage (2.2V to 3.6V) |
| Pin 132 | VSS — Digital ground |
| Pin 133 | VDD — Digital supply voltage (2.2V to 3.6V) |
| Pin 134 | VSS — Digital ground |
| Pin 135 | VDD — Digital supply voltage (2.2V to 3.6V) |
| Pin 136 | VSS — Digital ground |
| Pin 137 | VDD — Digital supply voltage (2.2V to 3.6V) |
| Pin 138 | VSS — Digital ground |
| Pin 139 | VDD — Digital supply voltage (2.2V to 3.6V) |
| Pin 140 | VSS — Digital ground |
| Pin 141 | XTAL1 — Main crystal oscillator input |
| Pin 142 | XTAL2 — Main crystal oscillator output |
| Pin 143 | RTCX1 — RTC crystal oscillator input |
| Pin 144 | RTCX2 — RTC crystal oscillator output |
Typische Anwendungen
LPC1833JBD144E ist geeignet für 6 Anwendungs: Industrial Ethernet Gateway, USB Audio/MIDI Device, Motor Control Drive (BLDC/PMSM), Human-Machine Interface (HMI) Panels, Connected Sensor Hub / IoT Edge Node, Industrial PLC / Process Controller.
Industrial Ethernet Gateway
The LPC1833JBD144E suits industrial Ethernet gateways thanks to its integrated 10/100 MAC with MII/RMII PHY interface and dual high-speed USB ports. At 180 MHz, the Cortex-M3 can sustain TCP/IP stacks (lwIP, uIP) with deterministic latency, and the 136 KB SRAM accommodates packet buffers. The 512 KB flash fits full networking stacks plus an embedded web server. Hardware crypto (AES, SHA) accelerates TLS handshakes, while the external memory bus allows expansion for large connection tables. Connect an external PHY to the MII pins, route Ethernet to RJ45 with magnetics, and use one HS USB port for a slave debug/CDC link. Compared to adding external bridges, this single-chip solution reduces BOM cost and PCB area.
Empfohlen
USB Audio/MIDI Device
The two USB 2.0 High-Speed controllers make the LPC1833JBD144E a strong choice for USB audio and MIDI peripherals. USB High-Speed supports 480 Mbps, sufficient for multichannel audio streaming class 2.0, while the 10-bit ADC can digitize analog inputs. The 136 KB SRAM provides USB endpoint buffering plus audio sample RAM; the SPI Flash Interface (SPIFI) lets firmware load external compressed sample data. Compared to lower-end Cortex-M0+ parts, the 180 MHz clock runs DSP-like audio processing in real time. Implement isochronous endpoints on the HS-USB port, output via I2S to an external DAC, and route analog input through the ADC. Production audio peripherals should use the industrial 'E' grade for thermal stability.
Empfohlen
Motor Control Drive (BLDC/PMSM)
The LPC1833JBD144E is targeted for small motor-control drives via its integrated State Configurable Timer (SCT) and Motor Control PWM block. The Cortex-M3 at 180 MHz runs field-oriented control (FOC) loops within tight cycle budgets, and the 8-channel 10-bit ADC samples phase currents synchronously to PWM. The 512 KB flash holds FOC libraries plus system firmware. Hardware crypto is not used in this role but the Ethernet MAC enables networked motor drives. Compared to discrete PWM controllers, the integrated MCU+peripheral approach cuts BOM cost and PCB area by approximately 40 percent. Hall-sensor or sensorless FOC firmware from NXP AN packages targets this family directly.
Empfohlen
Human-Machine Interface (HMI) Panels
Small industrial HMI panels up to 1024x768 resolution fit the LPC1833JBD144E capability envelope. The integrated LCD controller, two HS USB ports (one for touch, one for host), Ethernet for upload/download, and the external memory bus to add SDRAM make this part a single-chip HMI solution. The 512 KB flash stores LVGL/TouchGFX assets in compressed form and boots from SPIFI for higher capacity. Compared to MPU-based designs, this MCU-only HMI approach reduces power consumption, boot time, and BOM complexity. Connect a 4.3 to 7-inch RGB TFT to the LCD pins, drive a touch controller over I2C, and use the SD card interface for local data logging.
Empfohlen
Connected Sensor Hub / IoT Edge Node
The LPC1833JBD144E is well suited for industrial IoT edge nodes that aggregate sensor data and forward it over Ethernet or USB. The Cortex-M3 at 180 MHz handles sensor-fusion algorithms in firmware, while the integrated Ethernet MAC and dual USB provide flexible connectivity. Hardware crypto accelerates TLS, the 8-channel ADC multiplexes analog sensors, and the SD card interface provides local buffering during network outages. Compared to small Cortex-M0+ parts, this chip delivers roughly 3x the compute headroom for edge analytics. Connect sensors via I2C/SPI/UART, send JSON telemetry over MQTT over Ethernet, and provision the part via the secure boot ROM using the TRNG for keys.
Empfohlen
Industrial PLC / Process Controller
The LPC1833JBD144E fits into compact industrial PLC designs that need deterministic performance, Ethernet, USB for HMI panels, and CAN for fieldbus expansion. The external memory bus can attach an SDRAM for ladder-logic execution space, while the 512 KB flash holds IEC 61131-3 runtimes or proprietary firmware. Hardware crypto protects IP and secures remote firmware updates. Compared to legacy 8/16-bit PLC CPUs, the 180 MHz Cortex-M3 increases scan rates by roughly an order of magnitude. Connect CAN transceivers to the CAN pins, route digital I/O to the parallel bus, and use Ethernet for SCADA connectivity.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für LPC1833JBD144E – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | LPC1837JBD144E | LPC1833JBD144 | LPC1850JBD144E | LPC1820JBD144E | LPC1768FBD100 |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | LQFP-144 (20x20 mm) | LQFP-144 (20x20 mm) | LQFP-144 (20x20 mm) | LQFP-144 (20x20 mm) | LQFP-144 (20x20 mm) | LQFP-100 (14x14 mm) - DIFFERENT package |
| Flash Memory | 512 KB | 1 MB | 512 KB | 168 KB | 32 KB | 512 KB |
| SRAM | 136 KB | 136 KB | 136 KB | 136 KB | 32 KB | 64 KB |
| Maximum CPU Frequency | 180 MHz | 180 MHz | 180 MHz | 180 MHz | 180 MHz | 100 MHz |
| Ethernet MAC | 10/100 Mbps | 10/100 Mbps | 10/100 Mbps | 10/100 Mbps | 10/100 Mbps | 10/100 Mbps |
| USB 2.0 HS Controllers | 2 | 2 | 2 | 2 | 2 | 1 (Full-Speed only) |
| Operating Temperature | -40C to +105C (E grade) | -40C to +105C (E grade) | 0C to +70C (commercial) | -40C to +105C (E grade) | -40C to +105C (E grade) | -40C to +85C |
Wichtigste Unterscheidungsmerkmale
- Dual high-speed USB 2.0 controllers in LQFP-144 (vs. LPC1768FBD100)
- Higher CPU performance at 180 MHz (vs. LPC1768FBD100)
- Integrated hardware crypto engine (vs. LPC1820JBD144E)
Designhinweise
Decouple all VDD/VSS pin pairs with a 100 nF X5R ceramic placed within 5 mm of each pair; add one 4.7 uF bulk capacitor per supply rail near the MCU. VDDA must be tied to VDD through a ferrite bead or filter resistor to isolate ADC supply noise. Estimate: at 180 MHz active mode with all peripherals on, the LPC1833 draws ~150 mA typical; budget for 250 mA worst-case including USB high-speed PHY. Place the bulk capacitor close to the highest-current pins (VDD_3V3) to avoid ground bounce during USB suspend/resume events.
The LQFP-144 (20x20 mm, 0.5 mm pitch) requires 4-layer PCB routing for production designs; 2-layer boards can route this part but only with significant via and trace-width compromises. Place the main 12 MHz crystal within 10 mm of XTAL1/XTAL2 with short, parallel traces over a continuous ground pour. Route USB DP/DM as 90 ohm differential with reference to ground; the high-speed USB port requires the differential pair length-matched within 150 mil.
The 'E' industrial-grade LPC1833JBD144E supports -40C to +105C ambient. Estimate: at 180 MHz full activity, junction-to-ambient thermal resistance (theta_JA) for LQFP-144 is approximately 35 C/W on a 4-layer JEDEC test board. At 250 mA x 3.3 V, internal dissipation is ~0.5 W, producing roughly 17 C junction rise above ambient - well within limits. For enclosed designs with limited airflow, derate by adding 1 square inch of copper connected to the thermal pad.
Do not leave the ISP/UART boot pins floating during reset - the LPC1833 samples them at reset release to select boot source. Tie unused boot pins via 10 kohm pull-ups or pull-downs to deterministic states. The external memory bus pins default to a different function on reset; configure IOCON registers before driving them as GPIO to avoid bus contention. For SPIFI operation, the external serial flash must support the Quad-SPI mode and must be connected to the dedicated SPIFI pins (P8_4..P8_7).
Compliance-Informationen
RoHS compliant per NXP product page. Not AEC-Q100 qualified (this is an industrial MCU, not automotive-grade). Reach compliance is the standard NXP policy.
