AD977CN vs AD977ARZ Comparación
Comparación detallada lado a lado de AD977CN por Analog Devices y AD977ARZ por Analog Devices. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | AD977CN | AD977ARZ |
|---|---|---|
| Marca | Analog Devices | Analog Devices |
| Categoría | ADC/DAC | ADC/DAC |
| Estado del ciclo de vida | Obsolete | Unknown |
| Converter Type | Successive-approximation A/D converter | — |
| Resolución | 16 bit | 16 bit |
| Throughput Rate | 100 kSPS for AD977 | — |
| Family Comparison Throughput | 200 kSPS for AD977A | — |
| Tensión de alimentación | Single 5 V | — |
| Input Range | Unipolar 5 V; unipolar 4 V; bipolar 5 V; bipolar 3.3 V | — |
| Power Dissipation | 100 mW maximum | — |
| Power-Down Mode | Supported | Available |
| Encapsulado | 20-pin DIP | 20-pin SOIC |
| Tipo de montaje | Through-hole | Surface mount |
| Recuento de pines | 20 pins | — |
| Terminal Form | Through-hole | — |
| Temperature Grade | Industrial | — |
| Manufacturer | Analog Devices | — |
| Estado del ciclo de vida | Obsolete | — |
| Data Interface | [DATA_NEEDED: exact AD977CN output interface] | Serial |
| Input Type | [DATA_NEEDED: exact differential or single-ended input configuration] | Single-ended |
| Tensión de referencia | [DATA_NEEDED: reference voltage] | — |
| SNR | [DATA_NEEDED: signal-to-noise ratio] | [DATA_NEEDED: Signal-to-noise ratio] |
| ENOB | [DATA_NEEDED: effective number of bits] | [DATA_NEEDED: Effective number of bits] |
| INL | [DATA_NEEDED: integral nonlinearity] | [DATA_NEEDED: Integral nonlinearity] |
| DNL | [DATA_NEEDED: differential nonlinearity] | — |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: Operating temperature range] |
| Estado RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Status | not_applicable | — |
| Frecuencia de muestreo | — | 100 kSPS |
| Number of Inputs | — | 1 input |
| ADC Architecture | — | Successive approximation, switched-capacitor |
| Analog Supply Voltage Range | — | 4.75 V to 5.25 V |
| Nominal Supply Voltage | — | 5 V |
| Internal Reference Voltage | — | 2.5 V |
| Maximum Power Dissipation | — | 100 mW |
| Factory Calibration | — | Factory calibrated to minimize gain, offset, and nonlinearity errors |
| Analog Inputs | — | 1 unipolar analog input |
| Digital Supply Voltage | — | [DATA_NEEDED: Digital supply voltage range] |
| Input Full-Scale Range | — | [DATA_NEEDED: Analog input full-scale range] |
| Input Impedance | — | [DATA_NEEDED: Input impedance] |