AD977CN vs AD977ARZ Comparaison
Comparaison détaillée côte à côte de AD977CN par Analog Devices et AD977ARZ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | AD977CN | AD977ARZ |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | ADC/DAC | ADC/DAC |
| Statut du cycle de vie | Obsolete | Unknown |
| Converter Type | Successive-approximation A/D converter | — |
| Résolution | 16 bit | 16 bit |
| Throughput Rate | 100 kSPS for AD977 | — |
| Family Comparison Throughput | 200 kSPS for AD977A | — |
| Tension d'alimentation | Single 5 V | — |
| Input Range | Unipolar 5 V; unipolar 4 V; bipolar 5 V; bipolar 3.3 V | — |
| Power Dissipation | 100 mW maximum | — |
| Power-Down Mode | Supported | Available |
| Boîtier | 20-pin DIP | 20-pin SOIC |
| Type de montage | Through-hole | Surface mount |
| Nombre de broches | 20 pins | — |
| Terminal Form | Through-hole | — |
| Temperature Grade | Industrial | — |
| Manufacturer | Analog Devices | — |
| Statut du cycle de vie | Obsolete | — |
| Data Interface | [DATA_NEEDED: exact AD977CN output interface] | Serial |
| Input Type | [DATA_NEEDED: exact differential or single-ended input configuration] | Single-ended |
| Tension de référence | [DATA_NEEDED: reference voltage] | — |
| SNR | [DATA_NEEDED: signal-to-noise ratio] | [DATA_NEEDED: Signal-to-noise ratio] |
| ENOB | [DATA_NEEDED: effective number of bits] | [DATA_NEEDED: Effective number of bits] |
| INL | [DATA_NEEDED: integral nonlinearity] | [DATA_NEEDED: Integral nonlinearity] |
| DNL | [DATA_NEEDED: differential nonlinearity] | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: Operating temperature range] |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Status | not_applicable | — |
| Fréquence d'échantillonnage | — | 100 kSPS |
| Number of Inputs | — | 1 input |
| ADC Architecture | — | Successive approximation, switched-capacitor |
| Analog Supply Voltage Range | — | 4.75 V to 5.25 V |
| Nominal Supply Voltage | — | 5 V |
| Internal Reference Voltage | — | 2.5 V |
| Maximum Power Dissipation | — | 100 mW |
| Factory Calibration | — | Factory calibrated to minimize gain, offset, and nonlinearity errors |
| Analog Inputs | — | 1 unipolar analog input |
| Digital Supply Voltage | — | [DATA_NEEDED: Digital supply voltage range] |
| Input Full-Scale Range | — | [DATA_NEEDED: Analog input full-scale range] |
| Input Impedance | — | [DATA_NEEDED: Input impedance] |