AD977CN vs AD977ARZ तुलना
विस्तृत दोनों ओर की तुलना AD977CN द्वारा Analog Devices और AD977ARZ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | AD977CN | AD977ARZ |
|---|---|---|
| ब्रांड | Analog Devices | Analog Devices |
| श्रेणी | ADC/DAC | ADC/DAC |
| लाइफसाइकिल स्थिति | Obsolete | Unknown |
| Converter Type | Successive-approximation A/D converter | — |
| रेज़ोल्यूशन | 16 bit | 16 bit |
| Throughput Rate | 100 kSPS for AD977 | — |
| Family Comparison Throughput | 200 kSPS for AD977A | — |
| सप्लाई वोल्टेज | Single 5 V | — |
| Input Range | Unipolar 5 V; unipolar 4 V; bipolar 5 V; bipolar 3.3 V | — |
| Power Dissipation | 100 mW maximum | — |
| Power-Down Mode | Supported | Available |
| पैकेज | 20-pin DIP | 20-pin SOIC |
| माउंटिंग प्रकार | Through-hole | Surface mount |
| पिन काउंट | 20 pins | — |
| Terminal Form | Through-hole | — |
| Temperature Grade | Industrial | — |
| Manufacturer | Analog Devices | — |
| लाइफसाइकिल स्थिति | Obsolete | — |
| Data Interface | [DATA_NEEDED: exact AD977CN output interface] | Serial |
| Input Type | [DATA_NEEDED: exact differential or single-ended input configuration] | Single-ended |
| रेफ़रेंस वोल्टेज | [DATA_NEEDED: reference voltage] | — |
| SNR | [DATA_NEEDED: signal-to-noise ratio] | [DATA_NEEDED: Signal-to-noise ratio] |
| ENOB | [DATA_NEEDED: effective number of bits] | [DATA_NEEDED: Effective number of bits] |
| INL | [DATA_NEEDED: integral nonlinearity] | [DATA_NEEDED: Integral nonlinearity] |
| DNL | [DATA_NEEDED: differential nonlinearity] | — |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: Operating temperature range] |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Status | not_applicable | — |
| सैंपलिंग रेट | — | 100 kSPS |
| Number of Inputs | — | 1 input |
| ADC Architecture | — | Successive approximation, switched-capacitor |
| Analog Supply Voltage Range | — | 4.75 V to 5.25 V |
| Nominal Supply Voltage | — | 5 V |
| Internal Reference Voltage | — | 2.5 V |
| Maximum Power Dissipation | — | 100 mW |
| Factory Calibration | — | Factory calibrated to minimize gain, offset, and nonlinearity errors |
| Analog Inputs | — | 1 unipolar analog input |
| Digital Supply Voltage | — | [DATA_NEEDED: Digital supply voltage range] |
| Input Full-Scale Range | — | [DATA_NEEDED: Analog input full-scale range] |
| Input Impedance | — | [DATA_NEEDED: Input impedance] |