AD977CN vs AD977ARZ Perbandingan
Perbandingan bersamaan detil AD977CN dari Analog Devices dan AD977ARZ dari Analog Devices. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | AD977CN | AD977ARZ |
|---|---|---|
| Merek | Analog Devices | Analog Devices |
| Kategori | ADC/DAC | ADC/DAC |
| Status Lingkungan Hidup | Obsolete | Unknown |
| Converter Type | Successive-approximation A/D converter | — |
| Resolusi | 16 bit | 16 bit |
| Throughput Rate | 100 kSPS for AD977 | — |
| Family Comparison Throughput | 200 kSPS for AD977A | — |
| Tegangan Pemuat | Single 5 V | — |
| Input Range | Unipolar 5 V; unipolar 4 V; bipolar 5 V; bipolar 3.3 V | — |
| Power Dissipation | 100 mW maximum | — |
| Power-Down Mode | Supported | Available |
| Paket | 20-pin DIP | 20-pin SOIC |
| Tipe Mounting | Through-hole | Surface mount |
| Jumlah Pin | 20 pins | — |
| Terminal Form | Through-hole | — |
| Temperature Grade | Industrial | — |
| Manufacturer | Analog Devices | — |
| Status Lingkungan Hidup | Obsolete | — |
| Data Interface | [DATA_NEEDED: exact AD977CN output interface] | Serial |
| Input Type | [DATA_NEEDED: exact differential or single-ended input configuration] | Single-ended |
| Tegangan Referensi | [DATA_NEEDED: reference voltage] | — |
| SNR | [DATA_NEEDED: signal-to-noise ratio] | [DATA_NEEDED: Signal-to-noise ratio] |
| ENOB | [DATA_NEEDED: effective number of bits] | [DATA_NEEDED: Effective number of bits] |
| INL | [DATA_NEEDED: integral nonlinearity] | [DATA_NEEDED: Integral nonlinearity] |
| DNL | [DATA_NEEDED: differential nonlinearity] | — |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: Operating temperature range] |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Status | not_applicable | — |
| Laju Pengambilan Sampel | — | 100 kSPS |
| Number of Inputs | — | 1 input |
| ADC Architecture | — | Successive approximation, switched-capacitor |
| Analog Supply Voltage Range | — | 4.75 V to 5.25 V |
| Nominal Supply Voltage | — | 5 V |
| Internal Reference Voltage | — | 2.5 V |
| Maximum Power Dissipation | — | 100 mW |
| Factory Calibration | — | Factory calibrated to minimize gain, offset, and nonlinearity errors |
| Analog Inputs | — | 1 unipolar analog input |
| Digital Supply Voltage | — | [DATA_NEEDED: Digital supply voltage range] |
| Input Full-Scale Range | — | [DATA_NEEDED: Analog input full-scale range] |
| Input Impedance | — | [DATA_NEEDED: Input impedance] |