AD977CN vs AD977ARZ Karşılaştırma

Ayrıntılı yan yana karşılaştırma AD977CN tarafından Analog Devices ve AD977ARZ tarafından Analog DevicesAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.

Analog Devices
AD977CN AD977CN - 16-Bit 100 kSPS ADC | Analog Devices

AD977CN - 16-Bit 100 kSPS ADC | Analog Devices

AD977CN Obsolete
Analog Devices
AD977ARZ AD977ARZ - 16-Bit 100 kSPS SAR ADC | Analog Devices

AD977ARZ - 16-Bit 100 kSPS SAR ADC | Analog Devices

AD977ARZ Unknown

Özellik Karşılaştırması

Parametre AD977CN AD977ARZ
Marka Analog Devices Analog Devices
Kategori ADC/DAC ADC/DAC
Yaşam Döngüsü Durumu Obsolete Unknown
Converter Type Successive-approximation A/D converter —
Çözünürlük 16 bit 16 bit
Throughput Rate 100 kSPS for AD977 —
Family Comparison Throughput 200 kSPS for AD977A —
Besleme Gerilimi Single 5 V —
Input Range Unipolar 5 V; unipolar 4 V; bipolar 5 V; bipolar 3.3 V —
Power Dissipation 100 mW maximum —
Power-Down Mode Supported Available
Paket 20-pin DIP 20-pin SOIC
Montaj Türü Through-hole Surface mount
Pin Sayısı 20 pins —
Terminal Form Through-hole —
Temperature Grade Industrial —
Manufacturer Analog Devices —
Yaşam Döngüsü Durumu Obsolete —
Data Interface [DATA_NEEDED: exact AD977CN output interface] Serial
Input Type [DATA_NEEDED: exact differential or single-ended input configuration] Single-ended
Referans Gerilimi [DATA_NEEDED: reference voltage] —
SNR [DATA_NEEDED: signal-to-noise ratio] [DATA_NEEDED: Signal-to-noise ratio]
ENOB [DATA_NEEDED: effective number of bits] [DATA_NEEDED: Effective number of bits]
INL [DATA_NEEDED: integral nonlinearity] [DATA_NEEDED: Integral nonlinearity]
DNL [DATA_NEEDED: differential nonlinearity] —
İşletim Sıcaklığı Aralığı [DATA_NEEDED: operating temperature range] [DATA_NEEDED: Operating temperature range]
RoHS Durumu [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS compliance status]
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Status not_applicable —
Ölçekleme Oranı — 100 kSPS
Number of Inputs — 1 input
ADC Architecture — Successive approximation, switched-capacitor
Analog Supply Voltage Range — 4.75 V to 5.25 V
Nominal Supply Voltage — 5 V
Internal Reference Voltage — 2.5 V
Maximum Power Dissipation — 100 mW
Factory Calibration — Factory calibrated to minimize gain, offset, and nonlinearity errors
Analog Inputs — 1 unipolar analog input
Digital Supply Voltage — [DATA_NEEDED: Digital supply voltage range]
Input Full-Scale Range — [DATA_NEEDED: Analog input full-scale range]
Input Impedance — [DATA_NEEDED: Input impedance]

Dökümanlar & Kaynaklar

Tüm Ürünleri Gözden Geçir BOM Oluştur Teklif İsteyin