SP485E vs SN75176BDR Comparación
Comparación detallada lado a lado de SP485E por MaxLinear y SN75176BDR por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
MaxLinear
SP485E - Enhanced Low Power Half-Duplex RS-485/RS-422 Transceiver | MaxLinear
SP485E ✓ ActivoComparación de especificaciones
| Parámetro | SP485E | SN75176BDR |
|---|---|---|
| Marca | MaxLinear | Texas Instruments |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Función | Transceiver | — |
| Protocol | RS-485, RS-422 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half-duplex | — |
| Velocidad de datos | 2.5 Mbps (max, SP485E non-slew-limited) | — |
| Supply Voltage (VCC) | 4.75 V to 5.25 V | — |
| Receiver Input Sensitivity | ±200 mV | — |
| Receiver Input Impedance | 12 kΩ minimum, 15 kΩ typical | — |
| Common-Mode Range | −7 V to +12 V | — |
| ESD Protection (HBM) | ±15 kV | — |
| ESD Protection (IEC 61000-4-2 Air Discharge) | ±15 kV | — |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature] | 0 °C to 70 °C |
| Encapsulado | 8-pin NSOIC or PDIP | SOIC (D), 8 pins |
| Tipo de montaje | Surface Mount (NSOIC) or Through-Hole (PDIP) | Surface mount |
| Process Technology | BiCMOS | — |
| Failsafe Receiver | Yes (open, shorted, idle bus) | — |
| Tri-State Enable Pins | Yes (DE, RE) | — |
| Estado RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | Differential bus transceiver |
| Tensión de alimentación | — | 5 V |
| Supported Standards | — | TIA/EIA-422-B and TIA/EIA-485-A |
| ITU Recommendations | — | V.11 and X.27 |
| Communication Mode | — | Bidirectional |
| Bus Architecture | — | Multipoint transmission |
| Transmission Line Type | — | Balanced transmission lines |
| Driver Output State | — | 3-state |
| Receiver Output State | — | 3-state |
| Recuento de pines | — | 8 pins |
| Manufacturer | — | Texas Instruments |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Maximum Data Rate | — | [DATA_NEEDED: maximum data rate] |
| Input and Output Electrical Limits | — | [DATA_NEEDED: input and output electrical limits] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Corriente en reposo | — | [DATA_NEEDED: quiescent current] |