SP485E vs SN75176BDR 比較

詳細並排比較 SP485E 由 MaxLinear 與 SN75176BDR 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

Texas Instruments
SN75176BDR SN75176BDR - 8-Pin RS-485/RS-422 Transceiver | TI

SN75176BDR - 8-Pin RS-485/RS-422 Transceiver | TI

SN75176BDR ✓ 啟用中

規格比較

參數 SP485E SN75176BDR
品牌 MaxLinear Texas Instruments
類別 Interface ICs Interface ICs
生命週期狀態 啟用中 啟用中
功能 Transceiver —
Protocol RS-485, RS-422 —
Number of Drivers/Receivers 1/1 —
Duplex Half-duplex —
資料速率 2.5 Mbps (max, SP485E non-slew-limited) —
Supply Voltage (VCC) 4.75 V to 5.25 V —
Receiver Input Sensitivity ±200 mV —
Receiver Input Impedance 12 kΩ minimum, 15 kΩ typical —
Common-Mode Range −7 V to +12 V —
ESD Protection (HBM) ±15 kV —
ESD Protection (IEC 61000-4-2 Air Discharge) ±15 kV —
工作溫度範圍 [DATA_NEEDED: operating temperature] 0 °C to 70 °C
封裝 8-pin NSOIC or PDIP SOIC (D), 8 pins
安裝類型 Surface Mount (NSOIC) or Through-Hole (PDIP) Surface mount
Process Technology BiCMOS —
Failsafe Receiver Yes (open, shorted, idle bus) —
Tri-State Enable Pins Yes (DE, RE) —
RoHS 狀態 Compliant [DATA_NEEDED: RoHS status]
Product Type — Differential bus transceiver
供應電壓 — 5 V
Supported Standards — TIA/EIA-422-B and TIA/EIA-485-A
ITU Recommendations — V.11 and X.27
Communication Mode — Bidirectional
Bus Architecture — Multipoint transmission
Transmission Line Type — Balanced transmission lines
Driver Output State — 3-state
Receiver Output State — 3-state
腳位數 — 8 pins
Manufacturer — Texas Instruments
REACH Status — [DATA_NEEDED: REACH status]
Automotive Qualification — [DATA_NEEDED: AEC-Q100 qualification]
Maximum Data Rate — [DATA_NEEDED: maximum data rate]
Input and Output Electrical Limits — [DATA_NEEDED: input and output electrical limits]
Propagation Delay — [DATA_NEEDED: propagation delay]
靜態電流 — [DATA_NEEDED: quiescent current]

資料表與資源

瀏覽所有產品 建立 BOM 索取報價