SP485E vs SN75176BDR Comparação
Comparação detalhada lado a lado de SP485E por MaxLinear e SN75176BDR por Texas Instruments. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
MaxLinear
SP485E - Enhanced Low Power Half-Duplex RS-485/RS-422 Transceiver | MaxLinear
SP485E ✓ AtivoComparação de especificações
| Parâmetro | SP485E | SN75176BDR |
|---|---|---|
| Marca | MaxLinear | Texas Instruments |
| Categoria | Interface ICs | Interface ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Função | Transceiver | — |
| Protocol | RS-485, RS-422 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half-duplex | — |
| Taxa de dados | 2.5 Mbps (max, SP485E non-slew-limited) | — |
| Supply Voltage (VCC) | 4.75 V to 5.25 V | — |
| Receiver Input Sensitivity | ±200 mV | — |
| Receiver Input Impedance | 12 kΩ minimum, 15 kΩ typical | — |
| Common-Mode Range | −7 V to +12 V | — |
| ESD Protection (HBM) | ±15 kV | — |
| ESD Protection (IEC 61000-4-2 Air Discharge) | ±15 kV | — |
| Faixa de temperatura de operação | [DATA_NEEDED: operating temperature] | 0 °C to 70 °C |
| Encapsulamento | 8-pin NSOIC or PDIP | SOIC (D), 8 pins |
| Tipo de montagem | Surface Mount (NSOIC) or Through-Hole (PDIP) | Surface mount |
| Process Technology | BiCMOS | — |
| Failsafe Receiver | Yes (open, shorted, idle bus) | — |
| Tri-State Enable Pins | Yes (DE, RE) | — |
| Status RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | Differential bus transceiver |
| Tensão de alimentação | — | 5 V |
| Supported Standards | — | TIA/EIA-422-B and TIA/EIA-485-A |
| ITU Recommendations | — | V.11 and X.27 |
| Communication Mode | — | Bidirectional |
| Bus Architecture | — | Multipoint transmission |
| Transmission Line Type | — | Balanced transmission lines |
| Driver Output State | — | 3-state |
| Receiver Output State | — | 3-state |
| Contagem de pinos | — | 8 pins |
| Manufacturer | — | Texas Instruments |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Maximum Data Rate | — | [DATA_NEEDED: maximum data rate] |
| Input and Output Electrical Limits | — | [DATA_NEEDED: input and output electrical limits] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Corrente de repouso | — | [DATA_NEEDED: quiescent current] |