10AX090U1F45I1SG - Arria 10 GX FPGA 900K LE 1932-FCBGA | Intel
N.º de pieza: 10AX090U1F45I1SG ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $11951.92 | $11.951,92 |
| 10 | $11500 | $115.000,00 |
| 50 | $10800 | $540.000,00 |
| 100 | $10250 | $1.025.000,00 |
| 250 | $9750 | $2.437.500,00 |
10AX090U1F45I1SG Descripción general
An FPGA (field-programmable gate array) is a class of programmable logic device (PLD) within the broader semiconductor hierarchy (FPGA -> PLD -> programmable logic -> integrated circuit) that combines configurable logic blocks, routing interconnect, programmable I/O, and dedicated hard IP such as transceivers, DSP blocks, and memory controllers. Unlike ASICs, FPGAs can be reconfigured after manufacture, enabling rapid prototyping, design iteration, and field upgradability for applications where time-to-market and design flexibility outweigh per-unit cost optimization.
Key features of the 10AX090U1F45I1SG include 28.05 Gbps-capable transceiver channels, hardened PCI Express Gen3 and Gen2 IP blocks, variable-precision DSP blocks for high-rate signal processing, dual ARM Cortex-A9 hard processor subsystem availability in select Arria 10 SoC variants, and industrial-grade temperature operation supporting -40C to +100C ambient. The 1932-ball FCBGA package uses a fine-pitch land-grid array optimized for high-speed signal integrity and multi-layer PCB routing.
Architecturally, the Arria 10 GX employs Intel's 20 nm process with a 14.3 Gbps backplane-capable transceiver core, achieving significant power reduction versus prior Arria V generation while doubling logic density per watt. The part supports partial reconfiguration, hot-socketing, and bitstream encryption for secure in-field updates, with JTAG and passive/active serial configuration interfaces.
Typical applications for the 10AX090U1F45I1SG span 100G/400G data center line cards, military radar and electronic warfare DSP front-ends, professional broadcast video processing, 5G baseband and fronthaul, and high-channel-count medical imaging systems. Its balance of high logic density, hardened transceiver IP, and large embedded memory suits applications where engineers need high throughput without the design risk and NRE cost of an equivalent ASIC.
When designing with this 1932-BGA part, allocate adequate PCB layer count (typically 12+ layers) to maintain signal integrity on the transceiver channels; pair the FPGA with a matched-impedance DDR3/DDR4 memory topology, and provision a robust multi-rail power sequencing network with monotonic cold-start behavior. Use Intel's Quartus Prime design suite for synthesis, place-and-route, and timing closure.
This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, supporting faster sourcing and engineering decisions.
Alternativas directas para 10AX090U1F45I1SG — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con 10AX090U1F45I1SG (mismo factor de forma y huella) — difiere en Speed Grade, Package, Process Technology, Temperature Grade, Logic Elements.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
10AX090U1F45E1SG
✅ Sustitución directa✓ En stock
$8750 / unidad
Ver hoja de datos →10AX090S1F45I1SG
✅ Sustitución directa✓ En stock
$3890 / unidad
Ver hoja de datos →10AX090S2F45I1SG
✅ Sustitución directa✓ En stock
$3620 / unidad
Ver hoja de datos →10AX090R2F40I1SG
✅ Sustitución directa✓ En stock
$3720 / unidad
Ver hoja de datos →10AX090N2F45I1SG
✅ Sustitución directa✓ En stock
$6450 / unidad
Ver hoja de datos →10AS066K2F35I2SG
✅ Sustitución directa✓ En stock
$5750 / unidad
Ver hoja de datos →10AX090U1F45I1SG Valores máximos y características eléctricas
| Product Type | FPGA - Field Programmable Gate Array |
| Series | Arria 10 GX |
| Logic Elements | 900,000 LE |
| Adaptive Logic Modules (ALMs) | 339,620 ALM |
| Embedded Memory | 47.32 Mbit |
| Number of I/O | 480 user I/O |
| Number of Terminals | 1932 balls |
| Encapsulado / Carcasa | 1932-BBGA, FCBGA |
| Package Code | BGA (Square) |
| Form of Terminal | Ball |
| Tipo de montaje | Surface Mount |
| Operating Temperature Grade | INDUSTRIAL |
| Process Technology | 20 nm |
| Transceiver Speed | Up to 28.05 Gbps (per Arria 10 GX family) |
| Configuration | JTAG, Passive Serial, Active Serial |
| Hard IP | PCIe Gen3/Gen2 hard IP, variable-precision DSP, PLL |
| Packaging | Tray |
| Estado RoHS | Compliant |
Guía de configuración de pines de 10AX090U1F45I1SG bga (square)
Configuración de pines para 10AX090U1F45I1SG (encapsulado bga (square)). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para 10AX090U1F45I1SG.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
10AX090U1F45I1SG es adecuado para 6 aplicacións: 100G/400G Optical Transport Line Card, 5G Baseband and Fronthaul DSP, Military Radar and Electronic Warfare, Medical Imaging Accelerator (CT, MRI, Ultrasound), Broadcast Video Processing and 8K Routing, Data Center Accelerator / Smart NIC.
100G/400G Optical Transport Line Card
The 10AX090U1F45I1SG is well-suited for 100G/400G optical line cards thanks to its 28.05 Gbps-capable transceivers (U1 grade at 14.1 Gbps can drive QSFP28 modules and CFP2/CFP4 DACs via four bonded channels) and 47.32 Mbit of embedded memory for per-channel buffering. Designers typically use the FPGA as the MAC layer between the OTN framer and the optical module, with PCS soft IP and MACsec offload. The 480 user I/O deliver sufficient lane count for 4x100G or 2x400G topologies, while the industrial temperature grade lets the same design ship in both commercial telco and hardened outdoor form factors.
Recomendado
5G Baseband and Fronthaul DSP
In 5G fronthaul and baseband applications, the 10AX090U1F45I1SG supports the high DSP throughput required for CPRI/eCPRI bridging, PHY-layer channel coding, and low-latency packet processing. Its 339,620 ALMs and variable-precision DSP blocks deliver the multi-GSPS needed for LDPC/turbo decoders, while the 47.32 Mbit embedded memory provides the buffer depth required for HARQ retransmissions. The hardened PCI Express Gen3 IP allows direct attachment to a baseband SoC across PCIe x8, simplifying board layout versus soft IP approaches.
Recomendado
Military Radar and Electronic Warfare
For military radar, SIGINT, and electronic warfare, the 10AX090U1F45I1SG provides the high DSP throughput and ruggedized industrial temperature grade that defense systems demand. The 900K LE and DSP blocks process the wideband digitized returns from ADCs at sample rates up to several GSPS, while the transceiver channels carry raw ADC data into the fabric at 14.1 Gbps (U1) or 28.05 Gbps (U2). System designers often pair the FPGA with a high-channel-count ADC and DAC chain on a VPX or OpenVPX backplane, where the part's high pin count supports multi-board interconnection.
Recomendado
Medical Imaging Accelerator (CT, MRI, Ultrasound)
The 10AX090U1F45I1SG accelerates back-end image reconstruction in CT, MRI, and ultrasound systems, where its 47.32 Mbit embedded memory holds the raw sinogram or k-space data while DSP blocks execute filtered back-projection or FFT-based reconstruction. The high ALM count (339,620) is sufficient to implement multiple reconstruction pipelines in parallel, and the PCI Express Gen3 hard IP provides a direct DMA channel to the host processor over a PCIe Gen3 x8 link. Industrial temperature grading lets the same design be reused across diagnostic and mobile ultrasound form factors.
Recomendado
Broadcast Video Processing and 8K Routing
In professional broadcast video infrastructure, the 10AX090U1F45I1SG drives 8K/4K routing, multi-format conversion, and SDI-over-IP bridging. Its high-density fabric supports simultaneous processing of up to eight 12G-SDI streams or multiple UHD-SDI/DisplayPort channels, while the transceiver fabric carries SMPTE ST 2110 (IP video) at 25 Gbps per stream. Designers rely on the embedded memory for line buffering and frame store, and on the hardened PCIe for control-plane communication with the broadcast controller.
Recomendado
Data Center Accelerator / Smart NIC
For Smart NIC, NVMe-of, and data center accelerator applications, the 10AX090U1F45I1SG provides the PCI Express Gen3 x8 (or Gen4 via soft IP) bandwidth and high-density compute needed for inline crypto, compression, and storage protocol offload. Embedded designers pair the FPGA with DRAM controllers (DDR3/DDR4 soft IP) and 100 GbE MACs running over the transceiver fabric to build an adapter card that offloads host CPU work. The 47.32 Mbit embedded memory provides the on-die cache needed to buffer inline operations.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para 10AX090U1F45I1SG — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | 10AX090U1F45E1SG | 10AX090S1F45I1SG | 10AX090S2F45I1SG | 10AX090R2F40I1SG | 10AX090N2F45I1SG | 10AS066K2F35I2SG |
|---|---|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel | Intel | Intel |
| Package | 1932-BBGA, FCBGA (F45) | 1932-BBGA, FCBGA (F45) | 1932-BBGA, FCBGA (F45) | 1932-BBGA, FCBGA (F45) | 1932-BBGA, FCBGA (F40) | 1932-BBGA, FCBGA (F45) | FBGA-1517 (F35 35 mm) |
| Logic Elements | 900,000 LE | 900,000 LE | 900,000 LE | 900,000 LE | 900,000 LE | 900,000 LE | 660,000 LE |
| Temperature Grade | INDUSTRIAL (-40C to +100C) | COMMERCIAL (0C to +85C) | INDUSTRIAL | INDUSTRIAL | INDUSTRIAL | INDUSTRIAL | INDUSTRIAL |
Diferenciadores clave
- Industrial temperature grading versus commercial-only alternates (frente a 10AX090U1F45E1SG)
- Higher transceiver capability than S-grade but lower cost than U2 (frente a 10AX090S1F45I1SG)
- Comparable density at smaller BGA footprint (F40 vs F45) (frente a 10AX090R2F40I1SG)
Notas de diseño
Estimated: At 0.9 V core supply with 900K LE fully utilized and a 14.1 Gbps transceiver fabric at typical toggle activity, the 10AX090U1F45I1SG dissipates in the 15-25 W range. The 1932-FCBGA F45 package requires a thermal interface material (TIM) pad and a heatsink with adequate airflow (>=200 LFM). For rack-mount designs, pair the FPGA with a copper heatspreader plate bonded to the BGA lid. Designers should consult Intel's Arria 10 GX thermal design guide for the recommended PCB land pattern and heat-spreader stack-up. Junction-to-ambient thermal resistance (theta_JA) values are highly package-dependent; verify against the latest device datasheet.
The 1932-ball FCBGA package requires a high-layer-count PCB (typically 12+ layers) to maintain 85 ohm differential and 100 ohm characteristic impedance on the transceiver channels. Use Intel's Arria 10 GX PCB design guidelines for stack-up recommendations, and route transceivers as stripline with continuous reference planes for the first 4 inches. Match differential pair length to within 150 mils and use AC-coupled coupling caps (100 nF) at each end. The BGA ball pitch is fine; escape vias should be micro-vias with staggered or stacked-via topology where possible.
The 10AX090U1F45I1SG requires multiple voltage rails (0.9 V VCC, 1.0 V/1.05 V auxiliary, 1.8 V/3.0 V transceiver supplies, 1.8 V VCCIO). Implement a monotonic power sequencing network with proper rail tracking; Intel specifies Power-On-Reset (POR) sequencing requirements in the device datasheet. Use a multi-rail controller (LTC2974 or similar) with closed-loop margining and current monitoring. Decoupling requires hundreds of low-ESL capacitors distributed beneath the BGA - follow the reference capacitor network in the design guidelines.
For 28.05 Gbps transceiver channels (U2 grade), PCB material selection is critical - use low-loss Megtron-6 or equivalent high-frequency dielectric (Df < 0.005 at 10 GHz) for the signal layers. Channel simulations should target below 1 dB insertion loss per inch at 14 GHz. For 14.1 Gbps (U1), standard FR4 stack-ups with high-grade dielectric are usable but not preferred for production designs. Place the FPGA on a dedicated ground island tied to a chassis ground plane at one point for EMI control.
Do not assume Arria 10 family parts are software-drop-in across all speed grades - Quartus Prime design rules differ between U1 (14.1 Gbps) and U2 (28.05 Gbps) variants. Verify all transceiver IP and timing constraints against the specific speed-grade variant being programmed. For the BGA pinout, never confuse the F45 (45 mm body) with F40 (40 mm body) variants - they are not pin-to-pin compatible even though both are 1932-ball. Confirm the F45 marking on the package before PCB assembly.
Información de cumplimiento
RoHS compliant per verified distributor data. AEC-Q100 is not applicable for FPGAs (it applies to automotive-grade ICs such as analog and discrete semiconductors). Lead-free is standard for Intel FPGAs in this generation. REACH and halogen status not explicitly stated in verified data; marked 'unknown'.