onsemi

LM324ADTB - Quad 3-32V General-Purpose Op Amp | onsemi

N.º de pieza: LM324ADTB ✓ Activo
3 V to 32 V Vdss 14-pin TSSOP Package
MOQ: 1 |

LM324ADTB Descripción general

onsemi LM324ADTB is a low-cost, general-purpose quad operational amplifier with true differential inputs, four amplifier circuits, a 3 V to 32 V supply range, and 3 mV input offset voltage in a 14-pin TSSOP package. The device is designed for instrumentation, buffer-amplifier, and general signal-conditioning applications where four amplifiers are integrated in one package.

An operational amplifier is an analog integrated circuit that uses high-gain differential feedback to amplify the voltage difference between its two inputs. The LM324 belongs to the quad operational amplifier hierarchy: operational amplifier, voltage-feedback amplifier, analog signal-conditioning IC, and power-management IC. Its four independent channels can perform amplification, buffering, summing, comparison, and basic active-filter functions without requiring four separate packages.

The LM324ADTB supports single-supply operation from 3 V to 32 V, making it suitable for systems whose rails are higher than those of common rail-to-rail precision amplifiers. Its 3 mV input offset voltage supports general-purpose applications where input accuracy requirements are moderate. True differential inputs allow each channel to respond to the difference between its inverting and non-inverting signals. The integrated quad configuration also reduces board area and simplifies multi-channel routing.

As a general-purpose amplifier, the LM324 series emphasizes practical utility rather than high speed or precision. The manufacturer describes the devices as low-cost quad operational amplifiers that are especially useful in single-supply systems. Their quiescent current is approximately one-fifth that of conventional dual operational amplifiers, according to the manufacturer datasheet. Detailed gain-bandwidth, slew-rate, input-bias-current, and common-mode limits must be checked against the operating conditions before precision filtering or signal-chain use.

Typical applications include four-channel sensor conditioning, transducer buffering, audio preamplification, current-voltage conversion, DC signal amplification, and mixed-signal instrumentation. The 14-pin TSSOP package is useful for compact industrial, consumer, and communications equipment where four analog functions must be accommodated without using four separate amplifier packages. Supply bypassing and stable feedback layouts remain important at the board level.

For a new design, place the device close to the powered circuits it serves and connect a suitable bypass capacitor near the supply pins. Keep feedback resistors and input traces short, maintain symmetrical routing where practical, and account for input bias-current errors when using high source impedances. The single supply must remain within the 3 V to 32 V operating range under all tolerance, transient, and temperature conditions.

This page consolidates the LM324ADTB electrical ratings, package details, pin assignments, replacement options, and practical layout considerations into an engineering-focused reference. It also identifies where the general-purpose LM324 architecture is appropriate and where precision, speed, rail-to-rail operation, or a lower-offset amplifier would provide a better design choice.

Alternativas directas para LM324ADTB — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con LM324ADTB (mismo factor de forma y huella) — difiere en Package, Amplifier Type, Input Offset Voltage, Gain-Bandwidth Product, Number of Channels.

Texas Instruments
Package: 14-pin TSSOP (PW)
Amplifier Type: General-purpose operational amplifier
Gain-Bandwidth Product: 1.2 MHz
Comparar con LM324ADTB →
STMicroelectronics
Package: SOIC-14
Amplifier Type: General Purpose
Input Offset Voltage: 2 mV typical
Comparar con LM324ADTB →
onsemi
Amplifier Type: General-purpose operational amplifier
Input Offset Voltage: 5 mV
Comparar con LM324ADTB →
Texas Instruments
Amplifier Type: Quad general-purpose operational amplifier
Gain-Bandwidth Product: 1.2 MHz
Number of Channels: 4 channels
Comparar con LM324ADTB →

LM324DTB

✅ Sustitución directa
onsemi
📦 14-TSSOP
General-purpose operational amplifier · 4 circuits · 3 V to 32 V · 5 mV · True differential inputs · Single supply · 14-pin TSSOP · Surface mount

Consulte el precio

Ver hoja de datos →

LM324APWR

✅ Sustitución directa
Texas Instruments
📦 14-TSSOP
4 circuits · General-purpose operational amplifier · 30 V · 1.2 MHz · 3 mV · 0°C to 70°C · 14-pin TSSOP (PW) · 14 pins

Consulte el precio

Ver hoja de datos →

LM324KAPW

✅ Sustitución directa
Texas Instruments
📦 14-TSSOP
Quad general-purpose operational amplifier · 4 channels · 4 circuits · 2 kV · 1.2 MHz · 14-pin TSSOP · TSSOP-14 · Surface mount

Consulte el precio

Ver hoja de datos →

LM324DT

✅ Sustitución directa
STMicroelectronics
📦 14-TSSOP
4 · 3 V to 32 V · ±1.5 V to ±16 V · 700 µA typical · 2 mV typical · 20 nA typical · 1.3 MHz typical · 0.4 V/µs typical

✗ Sin stock

$0.0827 / unidad

Ver hoja de datos →

LM324APWR

✅ Sustitución directa
Texas Instruments
📦 14-TSSOP
4 circuits · General-purpose operational amplifier · 30 V · 1.2 MHz · 3 mV · 0°C to 70°C · 14-pin TSSOP (PW) · 14 pins

Consulte el precio

Ver hoja de datos →

LM324ADTB Valores máximos y características eléctricas

Number of Amplifier Channels 4 channels
Supply Voltage Range 3 V to 32 V
Input Offset Voltage 3 mV
Input Type True differential inputs
Product Classification Standard general-purpose amplifier
Architecture Quad voltage-feedback operational amplifier
Encapsulado 14-pin TSSOP
Tipo de montaje Surface mount

Configuración de pines de LM324ADTB

TSSOP-14 (4.4mm) Package Pinout Diagram TSSOP-14 4.4x5mm, P0.65mm, JEDEC MO-153. 14-pin thin shrink. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 TSSOP-14 (4.4mm)
Pin 1 OUT1 — Amplifier 1 output
Pin 2 IN1- — Amplifier 1 inverting input
Pin 3 IN1+ — Amplifier 1 non-inverting input
Pin 4 V+ — Positive supply voltage
Pin 5 IN2+ — Amplifier 2 non-inverting input
Pin 6 IN2- — Amplifier 2 inverting input
Pin 7 OUT2 — Amplifier 2 output
Pin 8 OUT3 — Amplifier 3 output
Pin 9 IN3- — Amplifier 3 inverting input
Pin 10 IN3+ — Amplifier 3 non-inverting input
Pin 11 V- — Negative supply or ground connection
Pin 12 IN4+ — Amplifier 4 non-inverting input
Pin 13 IN4- — Amplifier 4 inverting input
Pin 14 OUT4 — Amplifier 4 output

Aplicaciones típicas

LM324ADTB es adecuado para 6 aplicacións: Industrial Sensor Conditioning, Audio Preamplification, Current-to-Voltage Conversion, Active Filtering, Data Acquisition Front End, Automotive Control Module.

🏭

Industrial Sensor Conditioning

The LM324ADTB fits four-channel industrial sensor conditioning because it combines four true-differential amplifiers in one 14-pin TSSOP package and operates from 3 V to 32 V. One channel can buffer a pressure or temperature transducer, another can amplify a bridge or differential sensor output, and the remaining channels can support excitation, gain, or active filtering. The 3 mV input offset specification is practical for general-purpose measurements, although high-impedance sensors require an input-bias-current check. Keep sensor traces short, provide local supply bypassing, and confirm common-mode limits at the lowest operating supply voltage.

🎧

Audio Preamplification

The LM324ADTB can provide multiple low-cost audio preamplifier or buffering channels when the design does not require rail-to-rail swing, low noise, or high bandwidth. Its four independent channels reduce package count in mixer, monitor, consumer, and communication equipment, while operation from a single 3 V to 32 V rail simplifies power architecture. The 3 mV input offset is generally acceptable for line-level signal paths, but microphone and low-level designs should verify input bias current, noise, and output swing against the selected supply voltage.

⚡

Current-to-Voltage Conversion

The LM324ADTB is useful in current-to-voltage converter and transimpedance stages because each channel can combine a feedback resistor with a second amplifier to create a virtual ground or active current sink. The device’s true differential inputs support sensing around a biased output, and the 14-pin TSSOP permits four amplifier functions in a compact footprint. Confirm the input bias current against the source impedance, keep feedback loops compact, and check output-current limits because the converter’s accuracy and settling behavior depend on stable feedback components.

🔧

Active Filtering

The LM324ADTB can implement first-order and basic higher-order active filters because four channels are available in one package and the amplifier supports 3 V to 32 V operation. A practical board can allocate channels to low-pass and high-pass sections, a summing stage, and an output buffer. Resistor matching and the amplifier’s gain-bandwidth and slew behavior determine usable frequency range. Keep the passive components and feedback paths compact, observe the 3 mV offset contribution, and test the complete filter rather than relying only on ideal transfer equations.

📺

Data Acquisition Front End

The LM324ADTB provides four channels for multiplexing, buffering, level shifting, and gain stages around a data-acquisition front end. True differential inputs allow each amplifier to process the difference between two sensor or converter outputs, reducing common-mode disturbance during analog signal conditioning. The 3 V to 32 V supply range supports both low-voltage and higher-voltage systems, but input bias current, common-mode range, output swing, and settling characteristics must be checked against the converter and sensor. Place the amplifier near the source and bypass the supply locally.

🚗

Automotive Control Module

The LM324ADTB is appropriate for general-purpose analog conditioning inside an automotive electronic control module when its automotive ordering code and qualification requirements satisfy the program specification. The quad arrangement supports sensor buffers, actuator-driver feedback paths, threshold amplifiers, and auxiliary filters within a single 14-pin TSSOP. Its 3 V to 32 V supply range covers many vehicle electrical systems, but designers must still verify transient protection, temperature grade, electromagnetic compatibility, and production traceability. Use stable reference components and follow the manufacturer’s decoupling and layout guidance.

What are the key specifications of LM324ADTB that engineers should know?
The LM324ADTB is a four-channel, general-purpose operational amplifier operating from 3 V to 32 V with 3 mV input offset voltage and true differential inputs. It is packaged in a 14-pin TSSOP. According to the onsemi LM324ADTB datasheet, the device is a low-cost single-supply quad amplifier, with quiescent current approximately one-fifth that associated with conventional dual operational amplifiers.
Where can I download the LM324ADTB datasheet PDF?
The LM324ADTB manufacturer datasheet is available through the onsemi documentation link associated with the LM324ADTB and through the mirrored PDF identified on this page. The document is titled “Single Supply Quad Operational Amplifiers” and describes the LM324 series, including its 3 V to 32 V supply operation, true differential inputs, package options, and electrical characteristics. Use the pin-description table in that document when assigning PCB tracks.
Where can I find the LM324ADTB pinout?
The LM324ADTB uses the standard 14-pin TSSOP quad-operational-amplifier arrangement. Pins 1, 7, 8, and 14 are amplifier outputs; pins 2, 3, 5, 6, 9, 10, 12, and 13 are inverting and non-inverting inputs; pin 4 connects to the positive supply, and pin 11 connects to ground. Confirm these assignments against the onsemi LM324ADTB datasheet before finalizing the layout.
What is the supply voltage range of the LM324ADTB?
The LM324ADTB operates from 3 V to 32 V, allowing operation from a single 3 V supply or from higher-voltage rails. According to the onsemi LM324ADTB datasheet, this voltage range is one of the defining advantages of the LM324 family in single-supply applications. The complete design must also satisfy the amplifier’s input common-mode and output-swing limits at the selected supply voltage.
Can the LM324ADTB be used with a single 3 V supply?
Yes, the LM324ADTB can operate from a single 3 V supply because its specified operating range begins at 3 V. The manufacturer identifies single-supply operation as a principal advantage of the LM324 series. Input and output signal levels must remain within the common-mode and swing limits applicable to that supply voltage, and the power pins require appropriate bypassing.
What is the input offset voltage of LM324ADTB?
The LM324ADTB has a specified input offset voltage of 3 mV. This figure is appropriate for general-purpose amplification and buffering, but it is substantially higher than the offset offered by precision amplifiers. For instrumentation requiring very small absolute errors, evaluate the offset over temperature, input bias current, source resistance, and gain error before treating the 3 mV maximum as the complete error budget.
Is LM324ADTB suitable for audio preamplifier applications?
The LM324ADTB is suitable for many general-purpose audio preamplifier and buffer positions that do not require low distortion, high bandwidth, or rail-to-rail output swing. Its four channels support multiple signal stages in one package. For low-noise microphone or line-level designs, verify input bias current, noise specifications, slew rate, and output swing against the signal amplitude and load requirements.
What is the difference between LM324ADTB and LM324APWR?
Both devices are 14-pin TSSOP quad operational amplifiers based on the general-purpose LM324 architecture, so their physical pin assignments align for drop-in PCB use. LM324ADTB is the onsemi automotive-oriented ordering code, while LM324APWR is a Texas Instruments ordering code. Temperature grade, qualification, offset limits, and production status should be compared directly before substitution.
LM324ADTB vs LM324DTB - which is better for an industrial design?
LM324ADTB should be preferred when the design requires the onsemi automotive-grade ordering option and qualification associated with the “ADTB” suffix. LM324DTB may be appropriate when the required temperature grade and qualification level are covered by that specific onsemi ordering code. Both use the 14-pin TSSOP format, but verify the manufacturer marking, temperature range, and traceability requirements before deciding.
When should I choose LM324ADTB over a precision amplifier?
Choose LM324ADTB when the circuit needs a low-cost, four-channel general-purpose amplifier and can tolerate a 3 mV input offset specification. Select a precision amplifier instead when low offset, low bias current, low drift, or accurate output over temperature is essential. The quad LM324 is also easier to standardize across multiple general-purpose channels.
Is LM324ADTB suitable for sensor conditioning and industrial instrumentation?
The LM324ADTB fits many industrial sensor-conditioning stages because it combines four amplifiers, true differential inputs, and operation from 3 V to 32 V. Each channel can buffer a sensor, amplify a differential voltage, or form part of an active filter. For high-impedance sensors, evaluate input bias current carefully; for safety-critical systems, verify automotive qualification and operating-temperature requirements for the exact ordering code.
What is the best drop-in replacement for LM324ADTB?
The closest drop-in choices are 14-pin TSSOP devices that preserve the standard LM324 quad-amplifier pin arrangement. LM324DTB from onsemi is the strongest same-manufacturer starting point, while LM324APWR and LM324KAPW from Texas Instruments provide TSSOP alternatives for non-automotive or higher-temperature designs. Confirm offset voltage, temperature range, qualification, and lifecycle status before approving a replacement.
Can a Texas Instruments LM324APWR replace an LM324ADTB?
An LM324APWR can be a physical drop-in candidate because it uses a 14-pin TSSOP package and the standard LM324 quad-amplifier arrangement. Electrical equivalence still depends on the required supply range, offset voltage, temperature grade, input/output limits, and qualification. The automotive ordering code on LM324ADTB should be reviewed carefully when a qualified alternative is required.
Where can I buy LM324ADTB and check current lead time?
Use the “Request a Quote” form on this page to request LM324ADTB availability, current lead time, and order handling. The form provides a single sourcing channel without relying on static distributor figures. Include your required quantity, acceptable date code, packaging preference, and any automotive qualification or traceability requirements in the request.
How should I design the PCB layout for LM324ADTB?
Place the LM324ADTB close to the circuits using its four channels, connect the positive supply and ground pins to short, low-impedance paths, and install the recommended bypass capacitor near the device. Keep input and feedback traces short to reduce coupling and instability risk. Avoid routing high-current or high-switching-node traces adjacent to the amplifier inputs, and follow the manufacturer layout guidance in the datasheet.

Datos de referencia de ingeniería para LM324ADTB — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose LM324ADTB for compact, general-purpose four-channel analog signal conditioning when the design uses a single 3 V to 32 V supply, can tolerate a 3 mV input offset specification, and requires an automotive-oriented onsemi ordering option. LM324DTB is the closest same-manufacturer choice for a design that does not require the ADTB qualification or ordering conditions. LM324APWR and LM324APW are useful 14-pin TSSOP alternatives when Texas Instruments sourcing or second-source production is preferred, while LM324KAPW may suit a wider-temperature requirement. LM324DT provides another cross-manufacturer TSSOP candidate. Before substitution, verify offset limits, temperature grade, supply limits, common-mode range, output swing, qualification, lifecycle status, and exact pin assignments. Use LM324ADTB when its automotive ordering conditions and compact quad integration outweigh the lower cost or wider portfolio offered by general-purpose variants.

Comparación con alternativas

Parámetro Este producto LM324DTB LM324APWR LM324KAPW LM324DT LM324APW
Brand onsemi onsemi Texas Instruments Texas Instruments STMicroelectronics Texas Instruments
Package 14-TSSOP 14-TSSOP 14-TSSOP 14-TSSOP 14-TSSOP 14-TSSOP
Number of Channels 4 channels 4 channels 4 channels 4 channels 4 channels 4 channels
Product Classification Standard general-purpose amplifier General-purpose quad operational amplifier General-purpose quad operational amplifier General-purpose quad operational amplifier General-purpose quad operational amplifier General-purpose quad operational amplifier

Diferenciadores clave

  • Combines four general-purpose amplifiers with a wide supply range (frente a LM2902DTB)
  • Uses a compact 14-pin TSSOP for four-channel analog conditioning (frente a LM324ADBR)
  • Automotive-oriented onsemi ordering option (frente a LM324APWR)

Notas de diseño

Route the positive supply directly to pin 4 and ground to pin 11 using short, low-impedance traces. Place the manufacturer-recommended bypass capacitor adjacent to the supply pins so switching and input-stage noise are attenuated before they reach the amplifier. Because the LM324ADTB operates from 3 V to 32 V, verify that supply transients remain below the maximum operating voltage and that ground offsets do not move input or output signals outside their valid ranges.

Place the TSSOP close to the sources of its four channels and keep input, feedback, and reference paths compact. Long traces can pick up noise, create parasitic capacitance, and add phase delay that reduces stability margin. Avoid routing high-current return paths or fast-switching nodes beside amplifier inputs. If a channel processes a high-impedance sensor, use a guarded or driven-shield approach only after confirming the input bias-current implications.

Do not treat the 3 mV input offset specification as a complete accuracy budget. In amplifier configurations, the effective output error can also include input bias current multiplied by source and feedback impedances, resistor tolerance, gain error, and temperature drift. For instrumentation or active filters, calculate each contribution and compare it with the required error before substituting another LM324-family device.

Use short, direct feedback loops and avoid capacitance on high-impedance non-inverting inputs unless the application requires intentional filtering. If the source impedance is high, include input-bias-current error and capacitive pickup in the noise analysis. When the circuit operates at high frequency, verify the amplifier’s gain-bandwidth and slew-rate limits from the manufacturer datasheet instead of assuming that the 3 V to 32 V supply rating defines high-speed performance.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The automotive-oriented ordering suffix does not by itself establish AEC-Q100 qualification. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer’s current declaration or product documentation.

Búsquedas relacionadas

LM324ADTB datasheet LM324ADTB pinout LM324ADTB datasheet pdf LM324ADTB equivalent LM324ADTB replacement LM324ADTB cross reference LM324ADTB vs LM324DTB LM324ADTB footprint LM324ADTB application circuit onsemi LM324ADTB LM324ADTB price LM324ADTB stock

Componentes & términos relacionados

onsemi LM324ADTB LM324DTB LM324APWR LM324KAPW LM324DT LM324APW Texas Instruments STMicroelectronics operational amplifier quad operational amplifier voltage-feedback amplifier analog signal-conditioning IC true differential input input offset voltage quiescent current single-supply operation active filter sensor conditioning transimpedance amplifier 14-pin TSSOP TSSOP package family surface-mount package automotive electronic control module
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ