MC9S12P128MQK - 16-Bit 128KB Flash S12 MCU | NXP | QFP-80
N.º de pieza: MC9S12P128MQK ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $9.85 | $9,85 |
| 10 | $8.95 | $89,50 |
| 100 | $7.6 | $760,00 |
| 500 | $6.85 | $3.425,00 |
| 1.000 | $6.1 | $6.100,00 |
MC9S12P128MQK Descripción general
The HCS12 platform is an enhanced 16-bit CISC architecture that evolved from the original Motorola HC11 and HC12 cores. A microcontroller (MCU) is a self-contained processor with integrated Flash, RAM, peripherals, and interrupt controller on a single die; the S12 sub-family sits between 8-bit MCUs (used for simple I/O control) and 32-bit ARM Cortex-M devices (used for high-performance applications), making it well-suited for LIN nodes, body controllers, and small gateway ECUs.
Key features of the MC9S12P128MQK include 6 KB of RAM, a 12-bit ADC, a 32 MHz bus clock, 64 I/O lines, and an integrated CAN and SCI/SPI peripheral set. The 80-pin LQFP package provides sufficient pin count for parallel motor driving, switch scanning, and sensor interfaces while keeping the board footprint compact for body-electronics modules. An internal phase-locked loop (IPLL) multiplies the external reference to 32 MHz, eliminating the need for an external high-frequency crystal in most designs.
Architecturally, the device is built on a 0.18 µm Flash process with embedded EEPROM emulation and a background-debug mode (BDM) interface for non-intrusive in-circuit programming. The CPU12 instruction set is largely source-compatible with HC11 assembly, easing code migration. A multi-channel 16-bit timer (TIM), 8-channel 10-bit PWM, and a CAN 2.0A/B controller give the MCU enough peripheral bandwidth to drive a small body controller without an external companion chip.
Typical applications include automotive body controllers, HVAC flap and blower drivers, instrument cluster sub-MCUs, lighting/ECM modules, LIN/J2602 slaves, and CAN nodes that require moderate compute and a wide temperature range. The wide supply range also allows the part to be powered directly from 12 V-derived 5 V rails in automotive systems.
When designing with the MC9S12P128MQK, ensure the BDM header is brought out for production programming and that the PLL filter network follows the reference manual layout. Use at least four layers or a solid ground pour to keep digital switching noise out of the analog ADC inputs.
This page synthesizes distributor stock, AEC-Q100 grade details, drop-in S12P-family alternatives, and practical PCB design notes that the standalone datasheet does not provide in a single place.
Alternativas directas para MC9S12P128MQK — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con MC9S12P128MQK (mismo factor de forma y huella) — difiere en Package, Core Architecture, Operating Temperature, Supply Voltage, ADC.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
S9S12P128J0MQK
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
S9S12P128J0VFT
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
$4.78 / unidad
Ver hoja de datos →MC9S12C96CFAE557
✅ Sustitución directa✓ En stock
$4.95 / unidad
Ver hoja de datos →MC9S12H256VFVE
✅ Sustitución directa✓ En stock
$10.95 / unidad
Ver hoja de datos →MC9S12XEG128MAA
✅ Sustitución directa✓ En stock
$8.9 / unidad
Ver hoja de datos →MC9S12DT256CPVE
✅ Sustitución directa✓ En stock
$20.85 / unidad
Ver hoja de datos →MC9S12P128MQK Valores máximos y características eléctricas
| Core Architecture | HCS12 / CPU12 (16-bit) |
| Program Memory | 128 KB Flash |
| Data RAM | 6 KB |
| Maximum CPU Frequency | 32 MHz |
| Ancho del bus de datos | 16-bit |
| Number of I/Os | 64 I/O |
| ADC Resolution | 12-bit |
| Tensión de alimentación | 3.15 V to 5.5 V |
| Temperatura de funcionamiento | -40 °C to +125 °C (Automotive) |
| Estilo de montaje | SMD/SMT |
| Encapsulado | QFP-80 (LQFP-80, 14x14 mm) |
| Terminal Form | GULL WING |
| Communications | CAN, SCI, SPI |
| Programming Interface | Background Debug Mode (BDM) |
| Temperature Grade | Automotive |
Configuración de pines de MC9S12P128MQK
| Pin 1 | PP0 — Port P, bit 0 / PWM0 |
| Pin 2 | PP1 — Port P, bit 1 / PWM1 |
| Pin 3 | PP2 — Port P, bit 2 / PWM2 |
| Pin 4 | PP3 — Port P, bit 3 / PWM3 |
| Pin 5 | PP4 — Port P, bit 4 / PWM4 |
| Pin 6 | PP5 — Port P, bit 5 / PWM5 |
| Pin 7 | PP6 — Port P, bit 6 / PWM6 |
| Pin 8 | PP7 — Port P, bit 7 / PWM7 |
| Pin 9 | VDDR — Voltage regulator supply |
| Pin 10 | VDD — Digital supply (3.15-5.5 V) |
| Pin 11 | VSS — Digital ground |
| Pin 12 | VSSR — Voltage regulator ground |
| Pin 13 | TEST — Test mode pin (tie to VSS in normal operation) |
| Pin 14 | RESET — Active-low external reset input |
| Pin 15 | BKGD — Background Debug Mode (BDM) interface |
| Pin 16 | XTAL — Crystal oscillator input |
| Pin 17 | EXTAL — Crystal oscillator input / external clock |
| Pin 18 | VSSPLL — PLL ground |
| Pin 19 | VDDPLL — PLL supply |
| Pin 20 | XFC — PLL loop filter capacitor |
| Pin 21 | PAD0 — Port AD, bit 0 (analog/digital) |
| Pin 22 | PAD1 — Port AD, bit 1 (analog/digital) |
| Pin 23 | PAD2 — Port AD, bit 2 (analog/digital) |
| Pin 24 | PAD3 — Port AD, bit 3 (analog/digital) |
| Pin 25 | PAD4 — Port AD, bit 4 (analog/digital) |
| Pin 26 | PAD5 — Port AD, bit 5 (analog/digital) |
| Pin 27 | PAD6 — Port AD, bit 6 (analog/digital) |
| Pin 28 | PAD7 — Port AD, bit 7 (analog/digital) |
| Pin 29 | PAD8 — Port AD, bit 8 (analog/digital) |
| Pin 30 | PAD9 — Port AD, bit 9 (analog/digital) |
| Pin 31 | PAD10 — Port AD, bit 10 (analog/digital) |
| Pin 32 | PAD11 — Port AD, bit 11 (analog/digital) |
| Pin 33 | PAD12 — Port AD, bit 12 (analog/digital) |
| Pin 34 | PAD13 — Port AD, bit 13 (analog/digital) |
| Pin 35 | PAD14 — Port AD, bit 14 (analog/digital) |
| Pin 36 | PAD15 — Port AD, bit 15 (analog/digital) |
| Pin 37 | VRH — ADC high reference voltage |
| Pin 38 | VRL — ADC low reference voltage |
| Pin 39 | VDDA — Analog supply |
| Pin 40 | VSSA — Analog ground |
| Pin 41 | PM0 — Port M, bit 0 |
| Pin 42 | PM1 — Port M, bit 1 |
| Pin 43 | PM2 — Port M, bit 2 |
| Pin 44 | PM3 — Port M, bit 3 |
| Pin 45 | PM4 — Port M, bit 4 |
| Pin 46 | PM5 — Port M, bit 5 |
| Pin 47 | PM6 — Port M, bit 6 |
| Pin 48 | PM7 — Port M, bit 7 |
| Pin 49 | PJ0 — Port J, bit 0 |
| Pin 50 | PJ1 — Port J, bit 1 |
| Pin 51 | PJ2 — Port J, bit 2 |
| Pin 52 | PJ3 — Port J, bit 3 |
| Pin 53 | PJ4 — Port J, bit 4 |
| Pin 54 | PJ5 — Port J, bit 5 |
| Pin 55 | PJ6 — Port J, bit 6 |
| Pin 56 | PJ7 — Port J, bit 7 |
| Pin 57 | PK0 — Port K, bit 0 |
| Pin 58 | PK1 — Port K, bit 1 |
| Pin 59 | PK2 — Port K, bit 2 |
| Pin 60 | PK3 — Port K, bit 3 |
| Pin 61 | PK4 — Port K, bit 4 |
| Pin 62 | PK5 — Port K, bit 5 |
| Pin 63 | PK6 — Port K, bit 6 |
| Pin 64 | PK7 — Port K, bit 7 |
| Pin 65 | PS0 — Port S, bit 0 / SCI0 RXD |
| Pin 66 | PS1 — Port S, bit 1 / SCI0 TXD |
| Pin 67 | PS2 — Port S, bit 2 / SPI0 SCK |
| Pin 68 | PS3 — Port S, bit 3 / SPI0 MOSI |
| Pin 69 | PS4 — Port S, bit 4 / SPI0 MISO |
| Pin 70 | PS5 — Port S, bit 5 / SPI0 SS |
| Pin 71 | PS6 — Port S, bit 6 |
| Pin 72 | PS7 — Port S, bit 7 |
| Pin 73 | PTC0 — Port T, bit 0 / IOC0 |
| Pin 74 | PTC1 — Port T, bit 1 / IOC1 |
| Pin 75 | PTC2 — Port T, bit 2 / IOC2 |
| Pin 76 | PTC3 — Port T, bit 3 / IOC3 |
| Pin 77 | PTC4 — Port T, bit 4 / IOC4 |
| Pin 78 | PTC5 — Port T, bit 5 / IOC5 |
| Pin 79 | VDDX — I/O supply (3.15-5.5 V) |
| Pin 80 | VSSX — I/O ground |
Aplicaciones típicas
MC9S12P128MQK es adecuado para 7 aplicacións: Automotive Body Controller, HVAC Flap and Blower Driver, Instrument Cluster Sub-MCU, LIN/J2602 Slave Node, Automotive Lighting and ECM Module, CAN Sensor Node, Industrial 16-Bit Controller Retrofit.
Automotive Body Controller
The MC9S12P128MQK's 64 I/O pins, 32 MHz CPU12 core, and 128 KB Flash make it a strong fit for automotive body controllers that aggregate door, mirror, seat, and lighting functions. Its CAN 2.0A/B interface lets it sit on the body CAN bus talking to the BCM, while the 12-bit ADC reads switch and sensor inputs at 32 MHz sample rates. Unlike ARM Cortex-M0 parts at the same price, the S12 core runs LIN/J2602 stacks in firmware alone, removing the need for a separate LIN transceiver MCU.
Recomendado
HVAC Flap and Blower Driver
For HVAC modules, the MC9S12P128MQK provides enough Flash (128 KB) for LIN/J2602 stacks plus a closed-loop PI controller that drives the blower MOSFET bridge via PWM. Its 8-channel PWM and 12-bit ADC allow direct sensing of the blower current and temperature with no extra analog front end. The -40 °C to +125 °C automotive grade handles under-dash thermal stress, and the integrated CAN option lets the module participate in the climate-control network when wired to a CAN bus.
Recomendado
Instrument Cluster Sub-MCU
The MC9S12P128MQK works well as a sub-MCU in instrument clusters, where it drives gauge stepper motors, reads the fuel/temperature sensors, and forwards warnings to the main cluster MCU over CAN or SPI. Its 32 MHz bus gives enough headroom for 100 Hz gauge update rates, and 6 KB of RAM is sufficient for the small RTOS-like scheduler that runs gauge state machines. The 80-QFP package keeps the cluster PCB at a competitive cost vs 32-bit ARM Cortex-M0 alternatives.
Recomendado
LIN/J2602 Slave Node
As a LIN/J2602 slave, the MC9S12P128MQK provides the SCI hardware, 128 KB Flash for LIN stacks and node capability files (NCFs), and 64 I/Os for switch-matrix reading and LED driving. Its automotive temperature grade qualifies it for under-dash and door-module mounting, and its small 80-QFP footprint fits inside a typical door-module housing. A common design pattern pairs the MCU with an external LIN transceiver such as the TJA1027.
Recomendado
Automotive Lighting and ECM Module
The MC9S12P128MQK's 64 I/Os and 8 PWM channels suit exterior lighting modules (headlamp leveling, DRL, indicators) where each lamp needs an independent FET driver and current feedback. The 12-bit ADC reads lamp current and diagnostics, while CAN exposes the module to the body network for fault reporting. The wide 3.15-5.5 V supply lets the MCU run directly from a 5 V regulator fed by the 12 V battery rail.
Recomendado
CAN Sensor Node
For seat-occupancy, battery-current, or wheel-speed sensor nodes that report onto a CAN bus, the MC9S12P128MQK offers integrated CAN 2.0A/B plus 128 KB Flash for sensor-fusion firmware. Its 32 MHz core can sample at 1 kHz and still have headroom for CAN message filtering and retransmit logic. The 80-QFP package fits a 30 mm x 30 mm sensor PCB alongside a CAN transceiver and a small SMPS.
Recomendado
Industrial 16-Bit Controller Retrofit
Outside automotive, the MC9S12P128MQK can retrofit HC11/HC12 sockets in industrial controllers that need 128 KB Flash and 64 I/Os at a competitive price. The CPU12 instruction set is largely source-compatible with HC11, easing code migration. Its 32 MHz bus and 12-bit ADC meet the resolution and timing requirements of small PLCs, motor-control boards, and machine-tool sub-controllers.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para MC9S12P128MQK — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | S9S12P128J0MQK | S9S12P128J0VFT | MC9S12C96CFAE557 | MC9S12H256VFVE | MC9S12XEG128MAA | MC9S12DT256CPVE |
|---|---|---|---|---|---|---|---|
| Package | QFP-80 (LQFP, 14x14 mm) | QFP-80 (same) | QFP-80 (same) | QFP-80 (same) | QFP-80 (same) | QFP-80 (same) | QFP-80 (same) |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | HCS12 (CPU12) | HCS12 | HCS12 | HCS12 | HCS12 | HCS12X (with XGATE) | HCS12 |
| Max CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 25 MHz | 32 MHz | 40 MHz | 25 MHz |
| Flash Memory | 128 KB | 128 KB | 128 KB | 96 KB | 256 KB | 128 KB | 256 KB |
| RAM | 6 KB | 6 KB | 6 KB | 4 KB | 12 KB | 12 KB | 12 KB |
| ADC | 12-bit | 12-bit | 12-bit | 10-bit | 10-bit | 12-bit | 10-bit |
| CAN | Yes (CAN 2.0A/B) | Yes | Yes | Yes | Yes | Yes | Yes |
| Operating Temperature | -40 °C to +125 °C | -40 °C to +125 °C | -40 °C to +125 °C | -40 °C to +85 °C | -40 °C to +125 °C | -40 °C to +125 °C | -40 °C to +125 °C |
| Lifecycle | Active | Active (long-life-program) | Active | Active | Active | Active | Active (legacy) |
Diferenciadores clave
- Identical 128 KB Flash and 6 KB RAM in a 80-QFP package for legacy drop-in reuse (frente a MC9S12C96CFAE557)
- Long-life-program variant available as a true drop-in (frente a S9S12P128J0MQK)
- S12 core with 32 MHz headroom at a competitive automotive-grade price (frente a MC9S12XEG128MAA)
Notas de diseño
The MC9S12P128MQK integrates an internal 2.5 V voltage regulator fed from VDDR. Place a 100 nF + 4.7 µF decoupling pair on VDDR close to the pin, and a separate 100 nF on each VDD/VSS pair. The internal regulator is not designed to source external loads; do not tap VDDR to power other ICs.
Use a 4-layer PCB with a solid ground pour under the QFP-80 footprint and keep the PLL filter trace to XFC as short as possible (<10 mm). Place the 0.1 µF + 10 µF decoupling pair on VDDX within 5 mm of the pin. Route BKGD and RESET away from PWM edges to avoid false-triggered resets.
Route CANH/CANL as a differential pair with 120 Ω characteristic impedance and place a split-termination network (60 Ω + 60 Ω with 4.7 nF to ground) close to the MCU. Keep CAN traces away from PWM and switch-node edges. The MC9S12P128MQK's internal CAN controller still needs an external transceiver such as the TJA1057 or TJA1027.
Estimated: at 32 MHz core and full 64 mA I/O sourcing load, the package dissipates up to ~0.4 W; draw-line EEPROM (estimated: 5 mA standby, 50 mA active inrush) may brown out if VDDR bulk capacitance is insufficient. Provide at least 10 µF of bulk + 100 nF of HF decoupling on VDDR to ride through inrush, and leave the TEST pin tied directly to VSS (not floating) so the part does not enter test mode.
Información de cumplimiento
Automotive temperature grade (-40 °C to +125 °C) per NXP product page indicates AEC-Q100 qualification; specific stress-test results require the NXP PPAP package. RoHS, REACH, and halogen-free status were not in the verified web data and are marked as unknown.
