MC9S12P128MQK - 16-Bit 128KB Flash S12 MCU | NXP | QFP-80
部品番号: MC9S12P128MQK ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $9.85 | $9.85 |
| 10 | $8.95 | $89.50 |
| 100 | $7.6 | $760.00 |
| 500 | $6.85 | $3,425.00 |
| 1,000 | $6.1 | $6,100.00 |
MC9S12P128MQK 概要
The HCS12 platform is an enhanced 16-bit CISC architecture that evolved from the original Motorola HC11 and HC12 cores. A microcontroller (MCU) is a self-contained processor with integrated Flash, RAM, peripherals, and interrupt controller on a single die; the S12 sub-family sits between 8-bit MCUs (used for simple I/O control) and 32-bit ARM Cortex-M devices (used for high-performance applications), making it well-suited for LIN nodes, body controllers, and small gateway ECUs.
Key features of the MC9S12P128MQK include 6 KB of RAM, a 12-bit ADC, a 32 MHz bus clock, 64 I/O lines, and an integrated CAN and SCI/SPI peripheral set. The 80-pin LQFP package provides sufficient pin count for parallel motor driving, switch scanning, and sensor interfaces while keeping the board footprint compact for body-electronics modules. An internal phase-locked loop (IPLL) multiplies the external reference to 32 MHz, eliminating the need for an external high-frequency crystal in most designs.
Architecturally, the device is built on a 0.18 µm Flash process with embedded EEPROM emulation and a background-debug mode (BDM) interface for non-intrusive in-circuit programming. The CPU12 instruction set is largely source-compatible with HC11 assembly, easing code migration. A multi-channel 16-bit timer (TIM), 8-channel 10-bit PWM, and a CAN 2.0A/B controller give the MCU enough peripheral bandwidth to drive a small body controller without an external companion chip.
Typical applications include automotive body controllers, HVAC flap and blower drivers, instrument cluster sub-MCUs, lighting/ECM modules, LIN/J2602 slaves, and CAN nodes that require moderate compute and a wide temperature range. The wide supply range also allows the part to be powered directly from 12 V-derived 5 V rails in automotive systems.
When designing with the MC9S12P128MQK, ensure the BDM header is brought out for production programming and that the PLL filter network follows the reference manual layout. Use at least four layers or a solid ground pour to keep digital switching noise out of the analog ADC inputs.
This page synthesizes distributor stock, AEC-Q100 grade details, drop-in S12P-family alternatives, and practical PCB design notes that the standalone datasheet does not provide in a single place.
ドロップイン代替品: MC9S12P128MQK — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MC9S12P128MQK （同一形状・フットプリント） — 相違点: Package, Core Architecture, Operating Temperature, Supply Voltage, ADC.
クイック比較ツール — 並列比較する代替部品を選択:
S9S12P128J0MQK
✅ ドロップイン📋 参考代替品（カタログ未掲載）
S9S12P128J0VFT
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$4.78 / 個
データシートを見る →MC9S12C96CFAE557
✅ ドロップイン✓ 在庫あり
$4.95 / 個
データシートを見る →MC9S12H256VFVE
✅ ドロップイン✓ 在庫あり
$10.95 / 個
データシートを見る →MC9S12XEG128MAA
✅ ドロップイン✓ 在庫あり
$8.9 / 個
データシートを見る →MC9S12DT256CPVE
✅ ドロップイン✓ 在庫あり
$20.85 / 個
データシートを見る →MC9S12P128MQK 最大定格＆電気的特性
| Core Architecture | HCS12 / CPU12 (16-bit) |
| Program Memory | 128 KB Flash |
| Data RAM | 6 KB |
| Maximum CPU Frequency | 32 MHz |
| データバス幅 | 16-bit |
| Number of I/Os | 64 I/O |
| ADC Resolution | 12-bit |
| 電源電圧 | 3.15 V to 5.5 V |
| 動作温度 | -40 °C to +125 °C (Automotive) |
| 実装スタイル | SMD/SMT |
| パッケージ | QFP-80 (LQFP-80, 14x14 mm) |
| Terminal Form | GULL WING |
| Communications | CAN, SCI, SPI |
| Programming Interface | Background Debug Mode (BDM) |
| Temperature Grade | Automotive |
MC9S12P128MQK ピン構成
| ピン 1 | PP0 — Port P, bit 0 / PWM0 |
| ピン 2 | PP1 — Port P, bit 1 / PWM1 |
| ピン 3 | PP2 — Port P, bit 2 / PWM2 |
| ピン 4 | PP3 — Port P, bit 3 / PWM3 |
| ピン 5 | PP4 — Port P, bit 4 / PWM4 |
| ピン 6 | PP5 — Port P, bit 5 / PWM5 |
| ピン 7 | PP6 — Port P, bit 6 / PWM6 |
| ピン 8 | PP7 — Port P, bit 7 / PWM7 |
| ピン 9 | VDDR — Voltage regulator supply |
| ピン 10 | VDD — Digital supply (3.15-5.5 V) |
| ピン 11 | VSS — Digital ground |
| ピン 12 | VSSR — Voltage regulator ground |
| ピン 13 | TEST — Test mode pin (tie to VSS in normal operation) |
| ピン 14 | RESET — Active-low external reset input |
| ピン 15 | BKGD — Background Debug Mode (BDM) interface |
| ピン 16 | XTAL — Crystal oscillator input |
| ピン 17 | EXTAL — Crystal oscillator input / external clock |
| ピン 18 | VSSPLL — PLL ground |
| ピン 19 | VDDPLL — PLL supply |
| ピン 20 | XFC — PLL loop filter capacitor |
| ピン 21 | PAD0 — Port AD, bit 0 (analog/digital) |
| ピン 22 | PAD1 — Port AD, bit 1 (analog/digital) |
| ピン 23 | PAD2 — Port AD, bit 2 (analog/digital) |
| ピン 24 | PAD3 — Port AD, bit 3 (analog/digital) |
| ピン 25 | PAD4 — Port AD, bit 4 (analog/digital) |
| ピン 26 | PAD5 — Port AD, bit 5 (analog/digital) |
| ピン 27 | PAD6 — Port AD, bit 6 (analog/digital) |
| ピン 28 | PAD7 — Port AD, bit 7 (analog/digital) |
| ピン 29 | PAD8 — Port AD, bit 8 (analog/digital) |
| ピン 30 | PAD9 — Port AD, bit 9 (analog/digital) |
| ピン 31 | PAD10 — Port AD, bit 10 (analog/digital) |
| ピン 32 | PAD11 — Port AD, bit 11 (analog/digital) |
| ピン 33 | PAD12 — Port AD, bit 12 (analog/digital) |
| ピン 34 | PAD13 — Port AD, bit 13 (analog/digital) |
| ピン 35 | PAD14 — Port AD, bit 14 (analog/digital) |
| ピン 36 | PAD15 — Port AD, bit 15 (analog/digital) |
| ピン 37 | VRH — ADC high reference voltage |
| ピン 38 | VRL — ADC low reference voltage |
| ピン 39 | VDDA — Analog supply |
| ピン 40 | VSSA — Analog ground |
| ピン 41 | PM0 — Port M, bit 0 |
| ピン 42 | PM1 — Port M, bit 1 |
| ピン 43 | PM2 — Port M, bit 2 |
| ピン 44 | PM3 — Port M, bit 3 |
| ピン 45 | PM4 — Port M, bit 4 |
| ピン 46 | PM5 — Port M, bit 5 |
| ピン 47 | PM6 — Port M, bit 6 |
| ピン 48 | PM7 — Port M, bit 7 |
| ピン 49 | PJ0 — Port J, bit 0 |
| ピン 50 | PJ1 — Port J, bit 1 |
| ピン 51 | PJ2 — Port J, bit 2 |
| ピン 52 | PJ3 — Port J, bit 3 |
| ピン 53 | PJ4 — Port J, bit 4 |
| ピン 54 | PJ5 — Port J, bit 5 |
| ピン 55 | PJ6 — Port J, bit 6 |
| ピン 56 | PJ7 — Port J, bit 7 |
| ピン 57 | PK0 — Port K, bit 0 |
| ピン 58 | PK1 — Port K, bit 1 |
| ピン 59 | PK2 — Port K, bit 2 |
| ピン 60 | PK3 — Port K, bit 3 |
| ピン 61 | PK4 — Port K, bit 4 |
| ピン 62 | PK5 — Port K, bit 5 |
| ピン 63 | PK6 — Port K, bit 6 |
| ピン 64 | PK7 — Port K, bit 7 |
| ピン 65 | PS0 — Port S, bit 0 / SCI0 RXD |
| ピン 66 | PS1 — Port S, bit 1 / SCI0 TXD |
| ピン 67 | PS2 — Port S, bit 2 / SPI0 SCK |
| ピン 68 | PS3 — Port S, bit 3 / SPI0 MOSI |
| ピン 69 | PS4 — Port S, bit 4 / SPI0 MISO |
| ピン 70 | PS5 — Port S, bit 5 / SPI0 SS |
| ピン 71 | PS6 — Port S, bit 6 |
| ピン 72 | PS7 — Port S, bit 7 |
| ピン 73 | PTC0 — Port T, bit 0 / IOC0 |
| ピン 74 | PTC1 — Port T, bit 1 / IOC1 |
| ピン 75 | PTC2 — Port T, bit 2 / IOC2 |
| ピン 76 | PTC3 — Port T, bit 3 / IOC3 |
| ピン 77 | PTC4 — Port T, bit 4 / IOC4 |
| ピン 78 | PTC5 — Port T, bit 5 / IOC5 |
| ピン 79 | VDDX — I/O supply (3.15-5.5 V) |
| ピン 80 | VSSX — I/O ground |
主な用途
MC9S12P128MQK の用途: 7 件s: Automotive Body Controller, HVAC Flap and Blower Driver, Instrument Cluster Sub-MCU, LIN/J2602 Slave Node, Automotive Lighting and ECM Module, CAN Sensor Node, Industrial 16-Bit Controller Retrofit.
Automotive Body Controller
The MC9S12P128MQK's 64 I/O pins, 32 MHz CPU12 core, and 128 KB Flash make it a strong fit for automotive body controllers that aggregate door, mirror, seat, and lighting functions. Its CAN 2.0A/B interface lets it sit on the body CAN bus talking to the BCM, while the 12-bit ADC reads switch and sensor inputs at 32 MHz sample rates. Unlike ARM Cortex-M0 parts at the same price, the S12 core runs LIN/J2602 stacks in firmware alone, removing the need for a separate LIN transceiver MCU.
おすすめ
HVAC Flap and Blower Driver
For HVAC modules, the MC9S12P128MQK provides enough Flash (128 KB) for LIN/J2602 stacks plus a closed-loop PI controller that drives the blower MOSFET bridge via PWM. Its 8-channel PWM and 12-bit ADC allow direct sensing of the blower current and temperature with no extra analog front end. The -40 °C to +125 °C automotive grade handles under-dash thermal stress, and the integrated CAN option lets the module participate in the climate-control network when wired to a CAN bus.
おすすめ
Instrument Cluster Sub-MCU
The MC9S12P128MQK works well as a sub-MCU in instrument clusters, where it drives gauge stepper motors, reads the fuel/temperature sensors, and forwards warnings to the main cluster MCU over CAN or SPI. Its 32 MHz bus gives enough headroom for 100 Hz gauge update rates, and 6 KB of RAM is sufficient for the small RTOS-like scheduler that runs gauge state machines. The 80-QFP package keeps the cluster PCB at a competitive cost vs 32-bit ARM Cortex-M0 alternatives.
おすすめ
LIN/J2602 Slave Node
As a LIN/J2602 slave, the MC9S12P128MQK provides the SCI hardware, 128 KB Flash for LIN stacks and node capability files (NCFs), and 64 I/Os for switch-matrix reading and LED driving. Its automotive temperature grade qualifies it for under-dash and door-module mounting, and its small 80-QFP footprint fits inside a typical door-module housing. A common design pattern pairs the MCU with an external LIN transceiver such as the TJA1027.
おすすめ
Automotive Lighting and ECM Module
The MC9S12P128MQK's 64 I/Os and 8 PWM channels suit exterior lighting modules (headlamp leveling, DRL, indicators) where each lamp needs an independent FET driver and current feedback. The 12-bit ADC reads lamp current and diagnostics, while CAN exposes the module to the body network for fault reporting. The wide 3.15-5.5 V supply lets the MCU run directly from a 5 V regulator fed by the 12 V battery rail.
おすすめ
CAN Sensor Node
For seat-occupancy, battery-current, or wheel-speed sensor nodes that report onto a CAN bus, the MC9S12P128MQK offers integrated CAN 2.0A/B plus 128 KB Flash for sensor-fusion firmware. Its 32 MHz core can sample at 1 kHz and still have headroom for CAN message filtering and retransmit logic. The 80-QFP package fits a 30 mm x 30 mm sensor PCB alongside a CAN transceiver and a small SMPS.
おすすめ
Industrial 16-Bit Controller Retrofit
Outside automotive, the MC9S12P128MQK can retrofit HC11/HC12 sockets in industrial controllers that need 128 KB Flash and 64 I/Os at a competitive price. The CPU12 instruction set is largely source-compatible with HC11, easing code migration. Its 32 MHz bus and 12-bit ADC meet the resolution and timing requirements of small PLCs, motor-control boards, and machine-tool sub-controllers.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MC9S12P128MQK — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | S9S12P128J0MQK | S9S12P128J0VFT | MC9S12C96CFAE557 | MC9S12H256VFVE | MC9S12XEG128MAA | MC9S12DT256CPVE |
|---|---|---|---|---|---|---|---|
| Package | QFP-80 (LQFP, 14x14 mm) | QFP-80 (same) | QFP-80 (same) | QFP-80 (same) | QFP-80 (same) | QFP-80 (same) | QFP-80 (same) |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | HCS12 (CPU12) | HCS12 | HCS12 | HCS12 | HCS12 | HCS12X (with XGATE) | HCS12 |
| Max CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 25 MHz | 32 MHz | 40 MHz | 25 MHz |
| Flash Memory | 128 KB | 128 KB | 128 KB | 96 KB | 256 KB | 128 KB | 256 KB |
| RAM | 6 KB | 6 KB | 6 KB | 4 KB | 12 KB | 12 KB | 12 KB |
| ADC | 12-bit | 12-bit | 12-bit | 10-bit | 10-bit | 12-bit | 10-bit |
| CAN | Yes (CAN 2.0A/B) | Yes | Yes | Yes | Yes | Yes | Yes |
| Operating Temperature | -40 °C to +125 °C | -40 °C to +125 °C | -40 °C to +125 °C | -40 °C to +85 °C | -40 °C to +125 °C | -40 °C to +125 °C | -40 °C to +125 °C |
| Lifecycle | Active | Active (long-life-program) | Active | Active | Active | Active | Active (legacy) |
主な差別化要因
- Identical 128 KB Flash and 6 KB RAM in a 80-QFP package for legacy drop-in reuse （vs MC9S12C96CFAE557)
- Long-life-program variant available as a true drop-in （vs S9S12P128J0MQK)
- S12 core with 32 MHz headroom at a competitive automotive-grade price （vs MC9S12XEG128MAA)
設計ノート
The MC9S12P128MQK integrates an internal 2.5 V voltage regulator fed from VDDR. Place a 100 nF + 4.7 µF decoupling pair on VDDR close to the pin, and a separate 100 nF on each VDD/VSS pair. The internal regulator is not designed to source external loads; do not tap VDDR to power other ICs.
Use a 4-layer PCB with a solid ground pour under the QFP-80 footprint and keep the PLL filter trace to XFC as short as possible (<10 mm). Place the 0.1 µF + 10 µF decoupling pair on VDDX within 5 mm of the pin. Route BKGD and RESET away from PWM edges to avoid false-triggered resets.
Route CANH/CANL as a differential pair with 120 Ω characteristic impedance and place a split-termination network (60 Ω + 60 Ω with 4.7 nF to ground) close to the MCU. Keep CAN traces away from PWM and switch-node edges. The MC9S12P128MQK's internal CAN controller still needs an external transceiver such as the TJA1057 or TJA1027.
Estimated: at 32 MHz core and full 64 mA I/O sourcing load, the package dissipates up to ~0.4 W; draw-line EEPROM (estimated: 5 mA standby, 50 mA active inrush) may brown out if VDDR bulk capacitance is insufficient. Provide at least 10 µF of bulk + 100 nF of HF decoupling on VDDR to ride through inrush, and leave the TEST pin tied directly to VSS (not floating) so the part does not enter test mode.
コンプライアンス情報
Automotive temperature grade (-40 °C to +125 °C) per NXP product page indicates AEC-Q100 qualification; specific stress-test results require the NXP PPAP package. RoHS, REACH, and halogen-free status were not in the verified web data and are marked as unknown.
