XC7K70T-1FBG676I - 65,600-Cell Kintex-7 FPGA | AMD
N.º de pieza: XC7K70T-1FBG676I ✓ ActivoXC7K70T-1FBG676I Descripción general
An FPGA is a reconfigurable semiconductor that combines programmable logic blocks, programmable I/O, memory, DSP resources, and dedicated high-speed interface resources. Unlike a fixed-function application-specific integrated circuit, an FPGA permits hardware behavior to be revised through configuration bitstreams. The XC7K70T-1FBG676I is intended for designs requiring substantial parallelism and flexible I/O while supporting standards-based connectivity such as high-speed serial links.
The 65,600 logic-cell configuration provides substantial capacity for protocol handling, image and signal processing, control logic, and interface aggregation. The device includes 4,860 Kb of block RAM, 300 I/O, and DSP resources suited to communications and real-time processing. The 28 nm process generation supports a better price/performance and power profile than earlier FPGA generations for comparable high-performance applications.
The -1 designation identifies the device speed grade, while FBG676 identifies the 676-pin lidless FCBGA package. The I temperature suffix identifies the industrial temperature grade. The package exposes a very large number of user I/O and dedicated configuration, clock, power, and high-speed interface pins, so exact placement and routing must follow the manufacturer package drawings and pinout files.
Typical applications include wireless baseband equipment, remote radio units, telecommunications infrastructure, industrial control, test and measurement, signal processing, high-speed interface bridges, and embedded systems requiring configurable hardware. The large FCBGA footprint also demands careful PCB layout, thermal management, decoupling, and assembly process control.
For a new design, confirm the required I/O voltage, bank configuration, clocking architecture, transceiver or interface requirements, memory interface needs, and power budget against the complete Kintex-7 datasheet and device-specific documentation. Use the official package pinout files when assigning BGA balls and use the manufacturer power estimator and thermal guidance for the exact operating corner.
This page consolidates the verified device identity, package and logic-density details, compatible Kintex-7 alternatives, comparison parameters, and application guidance to support engineering selection. It is intended to accelerate initial screening while preserving the need to validate timing, power, thermal performance, and board-level compatibility before release to manufacturing.
Alternativas directas para XC7K70T-1FBG676I — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con XC7K70T-1FBG676I (mismo factor de forma y huella) — difiere en Package, Block RAM, Device Type, Speed Grade, Core Voltage.
XC7K70T-1FBG676C
✅ Sustitución directa✗ Sin stock
$36.5909 / unidad
Ver hoja de datos →XC7K70T-2FBG676C
✅ Sustitución directaConsulte el precio
Ver hoja de datos →XC7K70T-2FBG676I
✅ Sustitución directaConsulte el precio
Ver hoja de datos →XC7K70T-1FBG676I Valores máximos y características eléctricas
| Device Type | Field Programmable Gate Array (FPGA) |
| FPGA Family | Kintex-7 |
| Logic Cells | 65,600 |
| Configurable Logic Blocks | 5,125 |
| Block RAM | 4,860 Kb |
| User I/O | 300 |
| Frecuencia de reloj máxima | 1,098 MHz |
| Process Technology | 28 nm CMOS |
| Core Voltage | 1 V |
| Encapsulado | 676-pin lidless FCBGA (FBG676) |
| Speed Grade | -1 |
| Temperature Grade | Industrial |
| Temperatura de funcionamiento | -40C to +100C |
| Tipo de montaje | Surface Mount |
| Packaging Format | Tray |
| Programmable Logic Type | CMOS programmable logic |
| Design Support | AMD/Xilinx package pinout files and UG475 package information |
Guía de configuración de pines de XC7K70T-1FBG676I 676-pin lidless fcbga (fbg676)
Configuración de pines para XC7K70T-1FBG676I (encapsulado 676-pin lidless fcbga (fbg676)). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para XC7K70T-1FBG676I.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
XC7K70T-1FBG676I es adecuado para 6 aplicacións: Wireless Baseband Processing, Remote Radio Unit Signal Processing, Industrial Test and Measurement, High-Speed Interface Aggregation, DSP-Enabled Signal Conditioning, Aerospace and Defense Control Systems.
Wireless Baseband Processing
The XC7K70T-1FBG676I fits wireless baseband designs that combine digital filtering, modulation, packet handling, and high-speed data movement. Its 65,600 logic cells and 5,125 configurable logic blocks provide substantial parallel-processing capacity, while 4,860 Kb of block RAM supports buffers and working data. The 300 user I/O allow multiple interfaces to coexist when assigned to suitable voltage banks. Place the device in a controlled 676-pin FCBGA layout with matched power planes, and validate high-speed interfaces against the selected clocking and transceiver architecture.
Recomendado
Remote Radio Unit Signal Processing
Remote radio units benefit from the XC7K70T-1FBG676I because they combine configurable logic, DSP resources, block RAM, and a large industrial-temperature-compatible package in one device. The FPGA can implement digital filtering, gain control, cyclic-prefix processing, interface adaptation, and monitoring logic in parallel. Its -1 speed grade is useful when the design requires strong performance without moving to the -2 grade, while the industrial I designation supports equipment deployed outside controlled room temperatures. High-pin-count BGA routing and thermal verification remain essential.
Recomendado
Industrial Test and Measurement
The XC7K70T-1FBG676I is suitable for test and measurement systems requiring concurrent acquisition channels, protocol logic, timing control, and real-time analysis. Its 65,600 logic cells can support multiple instrument channels and control paths, and the 300 I/O provide extensive connectivity to converters, memory, clocks, and trigger circuitry. The 4,860 Kb of block RAM enables local sample buffering and reduces external-memory pressure in selected architectures. Use the industrial temperature specification as a starting point and confirm the actual enclosure temperature, power budget, and timing margin.
Recomendado
High-Speed Interface Aggregation
The XC7K70T-1FBG676I can consolidate multiple communication and data-acquisition interfaces in a single programmable device. Its large I/O count and substantial logic resources allow bridging, packetization, framing, buffering, and monitoring functions to share one FPGA. The 28 nm Kintex-7 architecture is positioned for high-performance systems requiring a balance of logic density, DSP capability, and serial connectivity. Board designers should use the manufacturer package pinout files, controlled-impedance stack-up, and power-integrity simulations because high-speed operation is strongly dependent on layout and board construction.
Recomendado
DSP-Enabled Signal Conditioning
The XC7K70T-1FBG676I is appropriate for programmable filters, demodulation, waveform generation, and real-time signal conditioning because its Kintex-7 resources combine logic, block RAM, and dedicated DSP capability. Parallel datapaths improve throughput for multichannel or complex waveform workloads, while the 300 I/O permit connection to external converters and memory. The -1 speed grade provides a performance baseline for industrial equipment, but users should evaluate whether their specific pipeline closes timing in the target speed grade. Decoupling and thermal design should be developed alongside the RTL.
Recomendado
Aerospace and Defense Control Systems
The XC7K70T-1FBG676I can support programmable control, data acquisition, fault monitoring, and communication logic in demanding aerospace and defense systems. The 65,600 logic cells provide room for redundant processing, diagnostics, and interface management, while the industrial temperature option is not, by itself, evidence of aerospace qualification. Engineers should confirm the exact ordering code, radiation, reliability, extended-temperature, and qualification requirements with AMD before using the device in a flight or safety-critical program. Timing, functional safety, and component pedigree must be separately verified.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para XC7K70T-1FBG676I — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | XC7K70T-1FBG676C | XC7K70T-2FBG676C | XC7K70T-2FBG676I |
|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD |
| Package | 676-pin lidless FCBGA (FBG676) | 676-pin lidless FCBGA (FBG676) | 676-pin lidless FCBGA (FBG676) | 676-pin lidless FCBGA (FBG676) |
| Family | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 |
| Logic Cells | 65,600 | 65,600 | 65,600 | 65,600 |
| Configurable Logic Blocks | 5,125 | 5,125 | 5,125 | 5,125 |
| Block RAM | 4,860 Kb | 4,860 Kb | 4,860 Kb | 4,860 Kb |
| User I/O | 300 | 300 | 300 | 300 |
| Speed Grade | -1 | -1 | -2 | -2 |
| Temperature Grade | Industrial | Commercial | Commercial | Industrial |
Diferenciadores clave
- Industrial temperature option with the Kintex-7 resource profile (frente a XC7K70T-1FBG676C)
- Lower speed grade provides a defined performance alternative (frente a XC7K70T-2FBG676C)
- Industrial temperature designation retained in the faster grade (frente a XC7K70T-2FBG676I)
Notas de diseño
Create the power tree from the AMD Kintex-7 data sheet and device-specific power-estimation results. Keep the 1 V core rail and each configurable I/O supply on independently filtered, properly decoupled networks. Place bulk and high-frequency decoupling capacitors close to their associated power balls, and verify voltage sequencing, load current, and power-plane integrity across all I/O configurations rather than only the nominal test pattern.
The 676-pin FCBGA package can concentrate heat around the device and its power-delivery structure. Use the manufacturer's thermal guidance, the actual PCB stack-up, and the highest expected ambient temperature to estimate junction temperature. Spread heat through uninterrupted copper, minimize thermal-via bottlenecks, and validate the assembled board in its intended enclosure. Do not substitute the logic-cell count for a thermal calculation.
Use the AMD FBG676 package pinout files and the manufacturer's recommended BGA land pattern when defining the PCB footprint. Pay particular attention to ball assignments for configuration, clocks, power, ground, and high-speed interfaces. Validate the stack-up, solder-mask and paste definitions, via-in-pad requirements, assembly profile, and X-ray inspection plan with a capable package-assembly team before volume fabrication.
Separate high-speed clock and serial-routing regions from noisy switching supplies and aggressive external clocking circuits. Match length and impedance according to the selected interface standard, use return-path planning for high-speed nets, and avoid routing sensitive signals across split power or ground planes. Re-run signal-integrity and timing simulations after every major placement, stack-up, or I/O-standard change.
Información de cumplimiento
The available product records do not provide a definitive compliance declaration for this exact ordering code. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and qualification status with AMD or the authorized documentation for the specific device and package.