XC7K70T-1FBG676I - 65,600-Cell Kintex-7 FPGA | AMD
MPN: XC7K70T-1FBG676I ✓ 啟用中XC7K70T-1FBG676I 概覽
An FPGA is a reconfigurable semiconductor that combines programmable logic blocks, programmable I/O, memory, DSP resources, and dedicated high-speed interface resources. Unlike a fixed-function application-specific integrated circuit, an FPGA permits hardware behavior to be revised through configuration bitstreams. The XC7K70T-1FBG676I is intended for designs requiring substantial parallelism and flexible I/O while supporting standards-based connectivity such as high-speed serial links.
The 65,600 logic-cell configuration provides substantial capacity for protocol handling, image and signal processing, control logic, and interface aggregation. The device includes 4,860 Kb of block RAM, 300 I/O, and DSP resources suited to communications and real-time processing. The 28 nm process generation supports a better price/performance and power profile than earlier FPGA generations for comparable high-performance applications.
The -1 designation identifies the device speed grade, while FBG676 identifies the 676-pin lidless FCBGA package. The I temperature suffix identifies the industrial temperature grade. The package exposes a very large number of user I/O and dedicated configuration, clock, power, and high-speed interface pins, so exact placement and routing must follow the manufacturer package drawings and pinout files.
Typical applications include wireless baseband equipment, remote radio units, telecommunications infrastructure, industrial control, test and measurement, signal processing, high-speed interface bridges, and embedded systems requiring configurable hardware. The large FCBGA footprint also demands careful PCB layout, thermal management, decoupling, and assembly process control.
For a new design, confirm the required I/O voltage, bank configuration, clocking architecture, transceiver or interface requirements, memory interface needs, and power budget against the complete Kintex-7 datasheet and device-specific documentation. Use the official package pinout files when assigning BGA balls and use the manufacturer power estimator and thermal guidance for the exact operating corner.
This page consolidates the verified device identity, package and logic-density details, compatible Kintex-7 alternatives, comparison parameters, and application guidance to support engineering selection. It is intended to accelerate initial screening while preserving the need to validate timing, power, thermal performance, and board-level compatibility before release to manufacturing.
直接替換替代品,適用於 XC7K70T-1FBG676I — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: XC7K70T-1FBG676I (相同外形與佔位) — 差異在於 Package, Block RAM, Device Type, Speed Grade, Core Voltage.
XC7K70T-1FBG676C
✅ 直接替換✗ 缺貨
$36.5909 / 單位
查看資料表 →XC7K70T-2FBG676C
✅ 直接替換聯絡詢價
查看資料表 →XC7K70T-2FBG676I
✅ 直接替換聯絡詢價
查看資料表 →XC7K70T-1FBG676I 最大額定值與電氣特性
| Device Type | Field Programmable Gate Array (FPGA) |
| FPGA Family | Kintex-7 |
| Logic Cells | 65,600 |
| Configurable Logic Blocks | 5,125 |
| Block RAM | 4,860 Kb |
| User I/O | 300 |
| 最大時脈頻率 | 1,098 MHz |
| Process Technology | 28 nm CMOS |
| Core Voltage | 1 V |
| 封裝 | 676-pin lidless FCBGA (FBG676) |
| Speed Grade | -1 |
| Temperature Grade | Industrial |
| 工作溫度 | -40C to +100C |
| 安裝類型 | Surface Mount |
| Packaging Format | Tray |
| Programmable Logic Type | CMOS programmable logic |
| Design Support | AMD/Xilinx package pinout files and UG475 package information |
XC7K70T-1FBG676I 676-pin lidless fcbga (fbg676) 腳位配置指南
XC7K70T-1FBG676I(676-pin lidless fcbga (fbg676) 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XC7K70T-1FBG676I.
請參閱 資料表 以查看完整腳位配置。
典型應用
XC7K70T-1FBG676I 適用於 6 應用s: Wireless Baseband Processing, Remote Radio Unit Signal Processing, Industrial Test and Measurement, High-Speed Interface Aggregation, DSP-Enabled Signal Conditioning, Aerospace and Defense Control Systems.
Wireless Baseband Processing
The XC7K70T-1FBG676I fits wireless baseband designs that combine digital filtering, modulation, packet handling, and high-speed data movement. Its 65,600 logic cells and 5,125 configurable logic blocks provide substantial parallel-processing capacity, while 4,860 Kb of block RAM supports buffers and working data. The 300 user I/O allow multiple interfaces to coexist when assigned to suitable voltage banks. Place the device in a controlled 676-pin FCBGA layout with matched power planes, and validate high-speed interfaces against the selected clocking and transceiver architecture.
推薦
Remote Radio Unit Signal Processing
Remote radio units benefit from the XC7K70T-1FBG676I because they combine configurable logic, DSP resources, block RAM, and a large industrial-temperature-compatible package in one device. The FPGA can implement digital filtering, gain control, cyclic-prefix processing, interface adaptation, and monitoring logic in parallel. Its -1 speed grade is useful when the design requires strong performance without moving to the -2 grade, while the industrial I designation supports equipment deployed outside controlled room temperatures. High-pin-count BGA routing and thermal verification remain essential.
推薦
Industrial Test and Measurement
The XC7K70T-1FBG676I is suitable for test and measurement systems requiring concurrent acquisition channels, protocol logic, timing control, and real-time analysis. Its 65,600 logic cells can support multiple instrument channels and control paths, and the 300 I/O provide extensive connectivity to converters, memory, clocks, and trigger circuitry. The 4,860 Kb of block RAM enables local sample buffering and reduces external-memory pressure in selected architectures. Use the industrial temperature specification as a starting point and confirm the actual enclosure temperature, power budget, and timing margin.
推薦
High-Speed Interface Aggregation
The XC7K70T-1FBG676I can consolidate multiple communication and data-acquisition interfaces in a single programmable device. Its large I/O count and substantial logic resources allow bridging, packetization, framing, buffering, and monitoring functions to share one FPGA. The 28 nm Kintex-7 architecture is positioned for high-performance systems requiring a balance of logic density, DSP capability, and serial connectivity. Board designers should use the manufacturer package pinout files, controlled-impedance stack-up, and power-integrity simulations because high-speed operation is strongly dependent on layout and board construction.
推薦
DSP-Enabled Signal Conditioning
The XC7K70T-1FBG676I is appropriate for programmable filters, demodulation, waveform generation, and real-time signal conditioning because its Kintex-7 resources combine logic, block RAM, and dedicated DSP capability. Parallel datapaths improve throughput for multichannel or complex waveform workloads, while the 300 I/O permit connection to external converters and memory. The -1 speed grade provides a performance baseline for industrial equipment, but users should evaluate whether their specific pipeline closes timing in the target speed grade. Decoupling and thermal design should be developed alongside the RTL.
推薦
Aerospace and Defense Control Systems
The XC7K70T-1FBG676I can support programmable control, data acquisition, fault monitoring, and communication logic in demanding aerospace and defense systems. The 65,600 logic cells provide room for redundant processing, diagnostics, and interface management, while the industrial temperature option is not, by itself, evidence of aerospace qualification. Engineers should confirm the exact ordering code, radiation, reliability, extended-temperature, and qualification requirements with AMD before using the device in a flight or safety-critical program. Timing, functional safety, and component pedigree must be separately verified.
推薦
推薦產品摘要
工程參考資料,適用於 XC7K70T-1FBG676I — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XC7K70T-1FBG676C | XC7K70T-2FBG676C | XC7K70T-2FBG676I |
|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD |
| Package | 676-pin lidless FCBGA (FBG676) | 676-pin lidless FCBGA (FBG676) | 676-pin lidless FCBGA (FBG676) | 676-pin lidless FCBGA (FBG676) |
| Family | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 |
| Logic Cells | 65,600 | 65,600 | 65,600 | 65,600 |
| Configurable Logic Blocks | 5,125 | 5,125 | 5,125 | 5,125 |
| Block RAM | 4,860 Kb | 4,860 Kb | 4,860 Kb | 4,860 Kb |
| User I/O | 300 | 300 | 300 | 300 |
| Speed Grade | -1 | -1 | -2 | -2 |
| Temperature Grade | Industrial | Commercial | Commercial | Industrial |
主要差異化特點
- Industrial temperature option with the Kintex-7 resource profile (對比XC7K70T-1FBG676C)
- Lower speed grade provides a defined performance alternative (對比XC7K70T-2FBG676C)
- Industrial temperature designation retained in the faster grade (對比XC7K70T-2FBG676I)
設計說明
Create the power tree from the AMD Kintex-7 data sheet and device-specific power-estimation results. Keep the 1 V core rail and each configurable I/O supply on independently filtered, properly decoupled networks. Place bulk and high-frequency decoupling capacitors close to their associated power balls, and verify voltage sequencing, load current, and power-plane integrity across all I/O configurations rather than only the nominal test pattern.
The 676-pin FCBGA package can concentrate heat around the device and its power-delivery structure. Use the manufacturer's thermal guidance, the actual PCB stack-up, and the highest expected ambient temperature to estimate junction temperature. Spread heat through uninterrupted copper, minimize thermal-via bottlenecks, and validate the assembled board in its intended enclosure. Do not substitute the logic-cell count for a thermal calculation.
Use the AMD FBG676 package pinout files and the manufacturer's recommended BGA land pattern when defining the PCB footprint. Pay particular attention to ball assignments for configuration, clocks, power, ground, and high-speed interfaces. Validate the stack-up, solder-mask and paste definitions, via-in-pad requirements, assembly profile, and X-ray inspection plan with a capable package-assembly team before volume fabrication.
Separate high-speed clock and serial-routing regions from noisy switching supplies and aggressive external clocking circuits. Match length and impedance according to the selected interface standard, use return-path planning for high-speed nets, and avoid routing sensitive signals across split power or ground planes. Re-run signal-integrity and timing simulations after every major placement, stack-up, or I/O-standard change.
合規資訊
The available product records do not provide a definitive compliance declaration for this exact ordering code. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and qualification status with AMD or the authorized documentation for the specific device and package.