Analog Devices

AD843KN - 34MHz Fast-Settling CBFET Op Amp | Analog Devices

MPN: AD843KN ✓ فعال
1 mV maximum for AD843K Vdss 0.6 nA typical Id 8-pin DIP Package -85 dB Speed
حداقل سفارش: 1 |

AD843KN نمای کلی

The Analog Devices AD843KN is a fast-settling CBFET-input operational amplifier with 34 MHz unity-gain bandwidth, 250 V/µs slew rate, and 0.6 nA typical input bias current, housed in an 8-pin DIP package. Its low bias current supports high-impedance signal sources while the 34 MHz bandwidth and 3.9 MHz full-power bandwidth provide useful high-speed performance.

A CBFET-input operational amplifier is a voltage-feedback amplifier whose input stage uses current-buffered FET devices. This amplifier category combines very low input bias current with wide bandwidth, placing the AD843KN between general-purpose precision amplifiers and specialist high-speed amplifier families. It is used within broader amplifier, signal-conditioning, and power-management systems where fast response and minimal input loading are more important than rail-to-rail input operation.

The principal features of the AD843KN include 34 MHz unity-gain bandwidth, a 250 V/µs slew rate, and settling to within 0.01% of the final value in 135 ns for a 10 V step. It is stable at gains of one or greater, simplifying unity-gain buffering and noninverting amplifier designs. The typical input bias current is only 0.6 nA, while the maximum input offset voltage for the AD843K family is 1 mV.

The AD843 datasheet describes excellent large-signal behavior and stable unity-gain operation. At a 5 MHz input frequency, the associated switching-device application reports crosstalk of -85 dB and isolation of -75 dB. These figures reflect the switching context rather than a standalone AD843 isolation specification, but they illustrate why the amplifier's bandwidth, input capacitance, and settling behavior must be considered together in fast signal paths.

Typical uses include high-speed sample-and-hold systems, high-speed integrators, active filters, and high-frequency signal-conditioning circuits. The combination of 250 V/µs slew rate and 135 ns settling is particularly useful when the system must recover quickly after a large input transition. The 0.6 nA bias current also makes the device appropriate for sources whose output impedance makes input bias effects significant.

Designers should use stable feedback networks at gains of one or greater, provide adequate supply bypassing, and route sensitive input and feedback connections to minimize parasitic capacitance. The operating supply limits and temperature grade should be checked in the Analog Devices AD843 datasheet before using the amplifier in a new design, especially where the negative supply approaches -5 V.

This product page combines the AD843KN's principal electrical characteristics, package details, application guidance, comparison parameters, and replacement information into an engineering-focused selection resource. It also distinguishes true pin-compatible family variants from alternatives that require a different package or materially different electrical performance.

جایگزین‌های drop-in برای AD843KN — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای AD843KN (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Input Bias Current, Input Offset Voltage, Mounting Type, Number of Circuits, Package.

Analog Devices
Input Bias Current: 0.6 nA (typ)
Input Offset Voltage: 1 mV max (K/B grades)
Mounting Type: Through Hole

AD843JN

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
Analog Devices
📦 8-pin DIP
1 circuit · Operational amplifier · CBFET · 34 MHz · 0.6 nA · 135 ns to within 0.01% for a 10 V step · 8-pin PDIP · 8 pins

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

AD843K

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 8-pin DIP
Same 34 MHz bandwidth, 250 V/µs slew rate, and 1 mV maximum offset family specification; the base ordering code omits the additional K-grade suffix used by AD843KN.

📋 جایگزین مرجع (خارج از کاتالوگ)

AD843JR

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 8-pin DIP
Same 34 MHz bandwidth and 250 V/µs slew rate; the J temperature grade differs from K by approximately 45 C at the upper operating limit.

📋 جایگزین مرجع (خارج از کاتالوگ)

AD843SQ/883B

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
Analog Devices
📦 8-pin DIP
General Purpose · 1 · 34 MHz · 135 ns (to 0.01%) · 250 V/µs (typ) · 0.6 nA (typ) · 1 mV max (K/B grades) · 3.9 MHz

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

AD843KN حداکثر مقادیر مجاز و مشخصات الکتریکی

Unity-Gain Bandwidth 34 MHz
Input Bias Current 0.6 nA typical
Settling Time 135 ns to within 0.01% of final value
Settling Test Step 10 V
Slew Rate 250 V/µs
Full-Power Bandwidth 3.9 MHz
Minimum Stable Gain 1
Input Offset Voltage 1 mV maximum for AD843K
Input Stage Type CBFET
Switching Crosstalk at 5 MHz Input -85 dB
Switching Isolation at 5 MHz Input -75 dB
Maximum Negative Supply in Switching Application -5 V
Number of Amplifiers 1 amplifier
Number of Circuits 1 circuit
بسته‌بندی 8-pin DIP
نوع نصب Through-hole

راهنمای پیکربندی پین AD843KN 8-pin dip

پیکربندی پین برای AD843KN (پکیج 8-pin dip). این قطعه آنالوگ دارای پین‌های ورودی، خروجی و تغذیه است. برای پیکربندی‌های پین offset null، جبران‌سازی و فعال‌سازی به دیتاشیت سازنده مراجعه کنید. ایده‌آل برای مدارهای شرطی‌سازی سیگنال و تقویت‌کننده.

نمودار پین‌آوت پکیج 8-pin dip برای AD843KN

داده پین‌آوت تفصیلی موجود نیست برای AD843KN.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

AD843KN مناسب است برای 6 کاربردs: High-Speed Sample-and-Hold, High-Speed Active Filtering, High-Speed Integrator, High-Frequency Signal Conditioning, Precision Pulse and Edge Conditioning, Data-Acquisition Front End.

⚡

High-Speed Sample-and-Hold

The AD843KN is well suited to high-speed sample-and-hold signal chains because its 34 MHz unity-gain bandwidth and 250 V/µs slew rate allow the amplifier output to recover rapidly after acquisition. Its 135 ns settling to within 0.01% after a 10 V step is important when the next sample arrives quickly. The 0.6 nA typical input bias current also reduces loading of high-impedance sources, although switch charge injection, hold-capacitor dielectric absorption, and amplifier input capacitance still require separate analysis.

🌐

High-Speed Active Filtering

In an active-filter implementation, the AD843KN provides the bandwidth and slew-rate headroom needed to preserve large or high-frequency signals without excessive distortion. Its unity-gain stability supports buffer and low-gain filter topologies, while the 250 V/µs slew rate helps the output track changing waveforms. Component selection should preserve the intended phase margin because high closed-loop gain, parasitic capacitance, and high-Q filter behavior can reduce stability even when the amplifier is unity-gain stable.

📺

High-Speed Integrator

The AD843KN can serve as the active element in a high-speed integrator because its 250 V/µs slew rate supports rapid output movement and its 135 ns settling characteristic reduces recovery time. The low 0.6 nA typical input bias current is advantageous when the integration input comes from a high-impedance source. Practical implementations must account for integration-capacitor tolerance, parasitic input capacitance, reset-switch behavior, saturation recovery, and the finite output-voltage range.

🔧

High-Frequency Signal Conditioning

The AD843KN is appropriate for conditioning signals with significant frequency content because its 34 MHz unity-gain bandwidth and 3.9 MHz full-power bandwidth offer useful separation between small-signal bandwidth and large-signal capability. The CBFET input provides 0.6 nA typical bias current, reducing disturbance of sensitive sources. Designers should verify the closed-loop gain response, output-drive requirement, and allowable distortion over the complete input range before placing the device directly after a transducer or high-impedance sensor.

📡

Precision Pulse and Edge Conditioning

Fast pulse edges can experience amplitude and timing errors if an amplifier slews too slowly, making the AD843KN useful for edge-shaping and pulse-conditioning circuits. Its 250 V/µs slew rate and 135 ns settling to within 0.01% support rapid recovery after large transitions. The 8-pin DIP package also permits straightforward prototyping and replacement in laboratory or legacy equipment, although input protection and supply bypassing remain important when handling fast edges.

🖥️

Data-Acquisition Front End

The AD843KN can drive a data-acquisition front end when the source impedance and required settling interval make slower general-purpose amplifiers unsuitable. Its 0.6 nA typical input bias current reduces current-related errors at high-impedance inputs, while 34 MHz bandwidth supports signals well above typical slow ADC sampling rates. The interface should still be evaluated for ADC acquisition time, settling accuracy, source capacitance, clock-edge alignment, and the amplifier's output swing.

What are the key specifications of AD843KN that engineers should know?
The AD843KN is a single CBFET-input operational amplifier with 34 MHz unity-gain bandwidth, 250 V/µs slew rate, 0.6 nA typical input bias current, and 135 ns settling to within 0.01% after a 10 V step. According to the Analog Devices AD843 datasheet, it is stable at gains of one or greater and has a 3.9 MHz full-power bandwidth. These characteristics place it between precision low-bias amplifiers and high-speed current-feedback amplifiers.
Where can I download the AD843KN datasheet PDF?
The official AD843KN datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD843.pdf. It contains the electrical characteristics, gain-bandwidth and phase plots, settling behavior, pin descriptions, power-supply requirements, and application guidance for the AD843 family. Use the manufacturer document for the exact AD843K temperature-grade limits and operating conditions.
Where can I find the AD843KN pinout?
The AD843KN uses an 8-pin DIP footprint, and its pin assignments should be taken from the pin-description table in the official Analog Devices AD843 datasheet. The package drawing identifies the pin-1 orientation and physical outline. Because the supplied search information does not reproduce every pin name, use the datasheet directly when assigning PCB tracks and verifying the orientation of the notch.
What can replace the AD843KN on an existing PCB?
The closest replacements are pin-compatible AD843 family devices in the same 8-pin DIP format, particularly AD843JN, AD843K, and AD843SQ/883B. The replacement must be checked for supply limits, offset-voltage grade, temperature range, and availability. A device with the same eight-pin footprint is not automatically a drop-in replacement when those electrical or environmental requirements differ.
What is the best drop-in replacement for AD843KN?
AD843JN is the most direct 8-pin DIP family alternative to AD843KN, sharing the 34 MHz bandwidth, 250 V/µs slew rate, and 0.6 nA typical input bias current. The practical difference is the qualification range: the K and J grades serve different temperature classes. Confirm the original board's supply voltages and ambient-temperature requirements before treating the part as interchangeable.
Is AD843KN suitable for high-speed sample-and-hold applications?
Yes, the AD843KN is suitable for high-speed sample-and-hold applications because its 250 V/µs slew rate and 135 ns settling behavior reduce acquisition and recovery time. Its 0.6 nA typical input bias current also limits disturbance of high-impedance sources. The complete switch, hold capacitor, amplifier, and output buffer still require bandwidth and charge-injection analysis as a system.
AD843KN versus AD843JN: which is better for the application?
AD843KN is preferable when the design requires the K-grade operating-temperature class, while AD843JN is appropriate when the J-grade range covers the ambient conditions. Both devices use the same 8-pin DIP architecture and provide 34 MHz unity-gain bandwidth, 250 V/µs slew rate, and 0.6 nA typical input bias current. The choice should be driven by temperature, lifecycle, and exact offset limits.
What is the difference between AD843KN and AD843K?
AD843KN and AD843K belong to the same AD843 amplifier family and share the core 34 MHz bandwidth, 250 V/µs slew rate, and 1 mV maximum input-offset specification identified for the AD843K grade. The ordering-code difference generally identifies the specific grade or packaging option, so engineers should compare the package drawing and full ordering information in the manufacturer datasheet before substitution.
When should I choose AD843KN over a lower-speed precision op amp?
Choose AD843KN when signal edges must move quickly or a large transient must settle in about 135 ns to within 0.01%. Its 34 MHz unity-gain bandwidth and 250 V/µs slew rate provide substantially more dynamic range than a general-purpose precision amplifier. For slow sensor signals, choose a lower-noise or lower-offset amplifier instead, because speed alone does not improve accuracy.
Is AD843KN the same as AD843JN for industrial temperature designs?
AD843KN and AD843JN are electrically similar and pin-compatible AD843K-family devices, but they should not be treated as identical for every industrial deployment. Their nominal temperature grades differ, so the ambient and enclosure temperature must fall within the replacement part's rated range. The Analog Devices AD843 datasheet is the controlling source for grade limits and maximum supply voltages.
What is the best Analog Devices equivalent for AD843KN?
AD843JN is the leading same-manufacturer equivalent when an 8-pin DIP pin-compatible device is required. It retains the 34 MHz unity-gain bandwidth, 250 V/µs slew rate, and 0.6 nA typical input bias current, while its temperature grade differs from AD843KN. If environmental qualification is more important than commercial availability, AD843SQ/883B is the military-oriented family option to evaluate.
Where can I buy AD843KN online and what is the lead time?
Use the Request a Quote form on this page to request the current AD843KN price, stock position, and lead time. The form allows the exact 8-pin DIP ordering code to be confirmed without relying on an outdated catalog figure. Engineers should also state the required quantity, date code, and any temperature or sourcing requirements when submitting the request.
What is the price of AD843KN?
The current AD843KN price is shown through the Request a Quote form on this page because pricing and availability can change with quantity, date code, and sourcing conditions. Submit the exact AD843KN ordering code and required quantity to obtain a current quote. The structured price evidence on this page is updated separately from the technical description to avoid presenting a stale figure.
Is AD843KN in stock?
Current AD843KN inventory should be confirmed through the Request a Quote form on this page. Stock can vary by package, production lot, and order quantity, and a marketplace status indicator does not guarantee allocation for a production build. Include the required delivery date and annual usage in the request for a more useful supply response.
How much heat does AD843KN dissipate at 5 MHz?
The Analog Devices AD843 datasheet provides full-power bandwidth and supply-current information, but the operating dissipation depends on the actual supply voltage, output waveform, load, and ambient temperature. Calculate worst-case dissipation from the supply current and output swing, then compare junction temperature with the package limit. The AD843KN is not a power-semiconductor device, so safe-operating-area data are not applicable.
Does AD843KN meet RoHS and REACH requirements?
The exact RoHS and REACH status for AD843KN should be confirmed through the manufacturer's product documentation or declaration for the applicable ordering code. The technical specifications confirm its 8-pin DIP construction and electrical performance, but they do not by themselves establish every regional material-compliance declaration. Use the Analog Devices product page and applicable compliance statements when documenting production release.

داده‌های مرجع مهندسی برای AD843KN — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose AD843KN when the circuit needs the combination of very low input bias current, wide bandwidth, and rapid settling, particularly in high-impedance sample-and-hold, integrator, filtering, or signal-conditioning circuits. AD843JN is the most practical conventional family alternative when its J-grade temperature range covers the installation environment. AD843K may be considered when the base ordering code matches the required grade and package documentation, while AD843JR serves the same general topology with the J-grade qualification class. AD843SQ/883B is the appropriate family option to evaluate when military-oriented documentation and qualification matter. For all four choices, verify the exact offset limits, supply range, and temperature ratings. The core performance remains 34 MHz bandwidth, 250 V/µs slew rate, and 0.6 nA typical input bias current, so qualification requirements rather than headline bandwidth should determine the final selection.

مقایسه با جایگزین‌ها

پارامتر این محصول AD843JN AD843K AD843JR AD843SQ/883B
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 8-pin DIP 8-pin DIP 8-pin DIP 8-pin DIP 8-pin DIP
Unity-Gain Bandwidth 34 MHz 34 MHz 34 MHz 34 MHz 34 MHz
Slew Rate 250 V/µs 250 V/µs 250 V/µs 250 V/µs 250 V/µs
Settling Time 135 ns to within 0.01% 135 ns to within 0.01% 135 ns to within 0.01% 135 ns to within 0.01% 135 ns to within 0.01%
Input Bias Current 0.6 nA typical 0.6 nA typical 0.6 nA typical 0.6 nA typical 0.6 nA typical
Full-Power Bandwidth 3.9 MHz 3.9 MHz 3.9 MHz 3.9 MHz 3.9 MHz
Minimum Stable Gain 1 1 1 1 1
Temperature Qualification K grade J grade Base AD843K ordering code J grade Military-oriented SQ/883B option

تفاوت‌های کلیدی

  • Combines very low input bias current with high bandwidth (در مقابلAD843JN)
  • Fast recovery after large input transitions (در مقابلAD843K)
  • Large-signal performance for fast signal paths (در مقابلAD843JR)
  • Same-family option with military-oriented qualification path (در مقابلAD843SQ/883B)

یادداشت‌های طراحی

Do not assume that identical package outlines guarantee full interchangeability. Compare the AD843KN and replacement device for input offset limits, temperature grade, supply range, and offset-voltage trim capability. The amplifier is stable at gains of one or greater, so verify the intended closed-loop gain and feedback network against the manufacturer's gain-bandwidth and stability plots before modifying an existing board.

Keep the input and feedback traces short, and place feedback components close to the amplifier pins. High-speed operation makes PCB capacitance and inductance significant, particularly around the input, feedback node, and power pins. Use a continuous ground-return path and minimize shared impedance between input-referenced and output currents. Avoid long stubs or test-point branches on sensitive analog nodes.

Place the supply-bypass capacitors close to the power pins and provide adequate decoupling for the expected load transients. The AD843 family's 250 V/µs slew rate can demand rapid output-current changes, so supply wiring and grounding should not introduce glitches into the signal path. Confirm the actual output swing, load, and dissipation under worst-case operating conditions using the datasheet's recommended supply arrangement.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The Analog Devices AD843 documentation identifies the amplifier and its electrical characteristics but does not establish every material-compliance declaration for the exact AD843KN ordering code.

تاریخ تأیید داده‌ها: 2026-11-18 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

AD843KN datasheet AD843KN datasheet pdf AD843KN pinout AD843KN 34 MHz op amp AD843KN 250 V/us slew rate AD843KN DIP-8 amplifier AD843KN equivalent AD843KN replacement AD843KN vs AD843JN AD843KN sample and hold AD843KN price AD843KN stock Analog Devices AD843KN AD843KN high speed integrator AD843KN CBFET input op amp

قطعات و اصطلاحات مرتبط

Analog Devices AD843KN AD843 AD843JN AD843K AD843JR AD843SQ/883B operational amplifier voltage-feedback amplifier CBFET input current-buffered FET input CBFET-input operational amplifier unity-gain bandwidth slew rate settling time input bias current input offset voltage full-power bandwidth sample-and-hold active filter high-speed integrator signal conditioning 8-pin DIP DIP package surface mount
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ