AD843KN - 34MHz Fast-Settling CBFET Op Amp | Analog Devices
部品番号: AD843KN ✓ 生産中AD843KN 概要
A CBFET-input operational amplifier is a voltage-feedback amplifier whose input stage uses current-buffered FET devices. This amplifier category combines very low input bias current with wide bandwidth, placing the AD843KN between general-purpose precision amplifiers and specialist high-speed amplifier families. It is used within broader amplifier, signal-conditioning, and power-management systems where fast response and minimal input loading are more important than rail-to-rail input operation.
The principal features of the AD843KN include 34 MHz unity-gain bandwidth, a 250 V/µs slew rate, and settling to within 0.01% of the final value in 135 ns for a 10 V step. It is stable at gains of one or greater, simplifying unity-gain buffering and noninverting amplifier designs. The typical input bias current is only 0.6 nA, while the maximum input offset voltage for the AD843K family is 1 mV.
The AD843 datasheet describes excellent large-signal behavior and stable unity-gain operation. At a 5 MHz input frequency, the associated switching-device application reports crosstalk of -85 dB and isolation of -75 dB. These figures reflect the switching context rather than a standalone AD843 isolation specification, but they illustrate why the amplifier's bandwidth, input capacitance, and settling behavior must be considered together in fast signal paths.
Typical uses include high-speed sample-and-hold systems, high-speed integrators, active filters, and high-frequency signal-conditioning circuits. The combination of 250 V/µs slew rate and 135 ns settling is particularly useful when the system must recover quickly after a large input transition. The 0.6 nA bias current also makes the device appropriate for sources whose output impedance makes input bias effects significant.
Designers should use stable feedback networks at gains of one or greater, provide adequate supply bypassing, and route sensitive input and feedback connections to minimize parasitic capacitance. The operating supply limits and temperature grade should be checked in the Analog Devices AD843 datasheet before using the amplifier in a new design, especially where the negative supply approaches -5 V.
This product page combines the AD843KN's principal electrical characteristics, package details, application guidance, comparison parameters, and replacement information into an engineering-focused selection resource. It also distinguishes true pin-compatible family variants from alternatives that require a different package or materially different electrical performance.
ドロップイン代替品: AD843KN — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: AD843KN (同一形状・フットプリント) — 相違点: Input Bias Current, Input Offset Voltage, Mounting Type, Number of Circuits, Package.
AD843JN
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →AD843K
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
AD843JR
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
AD843SQ/883B
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →AD843KN 最大定格&電気的特性
| Unity-Gain Bandwidth | 34 MHz |
| Input Bias Current | 0.6 nA typical |
| Settling Time | 135 ns to within 0.01% of final value |
| Settling Test Step | 10 V |
| Slew Rate | 250 V/µs |
| Full-Power Bandwidth | 3.9 MHz |
| Minimum Stable Gain | 1 |
| Input Offset Voltage | 1 mV maximum for AD843K |
| Input Stage Type | CBFET |
| Switching Crosstalk at 5 MHz Input | -85 dB |
| Switching Isolation at 5 MHz Input | -75 dB |
| Maximum Negative Supply in Switching Application | -5 V |
| Number of Amplifiers | 1 amplifier |
| Number of Circuits | 1 circuit |
| パッケージ | 8-pin DIP |
| 実装タイプ | Through-hole |
AD843KN 8-pin dip ピン配置ガイド
AD843KN (8-pin dip パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: AD843KN.
詳細は データシート をご参照ください。
主な用途
AD843KN の用途: 6 件s: High-Speed Sample-and-Hold, High-Speed Active Filtering, High-Speed Integrator, High-Frequency Signal Conditioning, Precision Pulse and Edge Conditioning, Data-Acquisition Front End.
High-Speed Sample-and-Hold
The AD843KN is well suited to high-speed sample-and-hold signal chains because its 34 MHz unity-gain bandwidth and 250 V/µs slew rate allow the amplifier output to recover rapidly after acquisition. Its 135 ns settling to within 0.01% after a 10 V step is important when the next sample arrives quickly. The 0.6 nA typical input bias current also reduces loading of high-impedance sources, although switch charge injection, hold-capacitor dielectric absorption, and amplifier input capacitance still require separate analysis.
おすすめ
High-Speed Active Filtering
In an active-filter implementation, the AD843KN provides the bandwidth and slew-rate headroom needed to preserve large or high-frequency signals without excessive distortion. Its unity-gain stability supports buffer and low-gain filter topologies, while the 250 V/µs slew rate helps the output track changing waveforms. Component selection should preserve the intended phase margin because high closed-loop gain, parasitic capacitance, and high-Q filter behavior can reduce stability even when the amplifier is unity-gain stable.
おすすめ
High-Speed Integrator
The AD843KN can serve as the active element in a high-speed integrator because its 250 V/µs slew rate supports rapid output movement and its 135 ns settling characteristic reduces recovery time. The low 0.6 nA typical input bias current is advantageous when the integration input comes from a high-impedance source. Practical implementations must account for integration-capacitor tolerance, parasitic input capacitance, reset-switch behavior, saturation recovery, and the finite output-voltage range.
おすすめ
High-Frequency Signal Conditioning
The AD843KN is appropriate for conditioning signals with significant frequency content because its 34 MHz unity-gain bandwidth and 3.9 MHz full-power bandwidth offer useful separation between small-signal bandwidth and large-signal capability. The CBFET input provides 0.6 nA typical bias current, reducing disturbance of sensitive sources. Designers should verify the closed-loop gain response, output-drive requirement, and allowable distortion over the complete input range before placing the device directly after a transducer or high-impedance sensor.
おすすめ
Precision Pulse and Edge Conditioning
Fast pulse edges can experience amplitude and timing errors if an amplifier slews too slowly, making the AD843KN useful for edge-shaping and pulse-conditioning circuits. Its 250 V/µs slew rate and 135 ns settling to within 0.01% support rapid recovery after large transitions. The 8-pin DIP package also permits straightforward prototyping and replacement in laboratory or legacy equipment, although input protection and supply bypassing remain important when handling fast edges.
おすすめ
Data-Acquisition Front End
The AD843KN can drive a data-acquisition front end when the source impedance and required settling interval make slower general-purpose amplifiers unsuitable. Its 0.6 nA typical input bias current reduces current-related errors at high-impedance inputs, while 34 MHz bandwidth supports signals well above typical slow ADC sampling rates. The interface should still be evaluated for ADC acquisition time, settling accuracy, source capacitance, clock-edge alignment, and the amplifier's output swing.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: AD843KN — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | AD843JN | AD843K | AD843JR | AD843SQ/883B |
|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 8-pin DIP | 8-pin DIP | 8-pin DIP | 8-pin DIP | 8-pin DIP |
| Unity-Gain Bandwidth | 34 MHz | 34 MHz | 34 MHz | 34 MHz | 34 MHz |
| Slew Rate | 250 V/µs | 250 V/µs | 250 V/µs | 250 V/µs | 250 V/µs |
| Settling Time | 135 ns to within 0.01% | 135 ns to within 0.01% | 135 ns to within 0.01% | 135 ns to within 0.01% | 135 ns to within 0.01% |
| Input Bias Current | 0.6 nA typical | 0.6 nA typical | 0.6 nA typical | 0.6 nA typical | 0.6 nA typical |
| Full-Power Bandwidth | 3.9 MHz | 3.9 MHz | 3.9 MHz | 3.9 MHz | 3.9 MHz |
| Minimum Stable Gain | 1 | 1 | 1 | 1 | 1 |
| Temperature Qualification | K grade | J grade | Base AD843K ordering code | J grade | Military-oriented SQ/883B option |
主な差別化要因
- Combines very low input bias current with high bandwidth (vs AD843JN)
- Fast recovery after large input transitions (vs AD843K)
- Large-signal performance for fast signal paths (vs AD843JR)
- Same-family option with military-oriented qualification path (vs AD843SQ/883B)
設計ノート
Do not assume that identical package outlines guarantee full interchangeability. Compare the AD843KN and replacement device for input offset limits, temperature grade, supply range, and offset-voltage trim capability. The amplifier is stable at gains of one or greater, so verify the intended closed-loop gain and feedback network against the manufacturer's gain-bandwidth and stability plots before modifying an existing board.
Keep the input and feedback traces short, and place feedback components close to the amplifier pins. High-speed operation makes PCB capacitance and inductance significant, particularly around the input, feedback node, and power pins. Use a continuous ground-return path and minimize shared impedance between input-referenced and output currents. Avoid long stubs or test-point branches on sensitive analog nodes.
Place the supply-bypass capacitors close to the power pins and provide adequate decoupling for the expected load transients. The AD843 family's 250 V/µs slew rate can demand rapid output-current changes, so supply wiring and grounding should not introduce glitches into the signal path. Confirm the actual output swing, load, and dissipation under worst-case operating conditions using the datasheet's recommended supply arrangement.
コンプライアンス情報
The Analog Devices AD843 documentation identifies the amplifier and its electrical characteristics but does not establish every material-compliance declaration for the exact AD843KN ordering code.